netdev - Re: [Patch v3 net-next 6/7] octeontx2-pf: ethtool physical link status

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 2 Feb 2021 16:46:12 -0800
From:   Jesse Brandeburg <jesse.brandeburg@...el.com>
To:     Hariprasad Kelam <hkelam@...vell.com>
Cc:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <kuba@...nel.org>, <davem@...emloft.net>,
        <willemdebruijn.kernel@...il.com>, <andrew@...n.ch>,
        <sgoutham@...vell.com>, <lcherian@...vell.com>,
        <gakula@...vell.com>, <jerinj@...vell.com>, <sbhatta@...vell.com>
Subject: Re: [Patch v3 net-next 6/7] octeontx2-pf: ethtool physical link
 status

Hariprasad Kelam wrote:

> From: Christina Jacob <cjacob@...vell.com>
> 
> Register get_link_ksettings callback to get link status information
> from the driver. As virtual function (vf) shares same physical link
> same API is used for both the drivers and for loop back drivers
> simply returns the fixed values as its does not have physical link.
> 
> ethtool eth3
> Settings for eth3:
>         Supported ports: [ ]
>         Supported link modes:   10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>                                 1000baseT/Half 1000baseT/Full
>                                 10000baseKR/Full
>                                 1000baseX/Full
>         Supports auto-negotiation: No
>         Supported FEC modes: BaseR RS
>         Advertised link modes:  Not reported
>         Advertised pause frame use: No
>         Advertised auto-negotiation: No
>         Advertised FEC modes: None
> 
> ethtool lbk0
> Settings for lbk0:
> 	Speed: 100000Mb/s
>         Duplex: Full
> 
> Signed-off-by: Christina Jacob <cjacob@...vell.com>
> Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
> Signed-off-by: Hariprasad Kelam <hkelam@...vell.com>

besides the slightly long lines, looks good.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@...el.com>