netdev - Re: [PATCH v2 net-next 1/4] dt-bindings: net: Add QCA807x PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <YCR5h73bASurqt5A@lunn.ch>
Date:   Thu, 11 Feb 2021 01:25:43 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Robert Marko <robert.marko@...tura.hr>
Cc:     agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, davem@...emloft.net, kuba@...nel.org,
        netdev@...r.kernel.org, hkallweit1@...il.com,
        linux@...linux.org.uk, Luka Perkov <luka.perkov@...tura.hr>
Subject: Re: [PATCH v2 net-next 1/4] dt-bindings: net: Add QCA807x PHY

On Wed, Feb 10, 2021 at 01:55:20PM +0100, Robert Marko wrote:
> Add DT bindings for Qualcomm QCA807x PHY series.
> 
> Signed-off-by: Robert Marko <robert.marko@...tura.hr>
> Cc: Luka Perkov <luka.perkov@...tura.hr>
> ---
> Changes in v2:
> * Drop PSGMII/QSGMII TX driver defines
> 
>  include/dt-bindings/net/qcom-qca807x.h | 30 ++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 include/dt-bindings/net/qcom-qca807x.h
> 
> diff --git a/include/dt-bindings/net/qcom-qca807x.h b/include/dt-bindings/net/qcom-qca807x.h
> new file mode 100644
> index 000000000000..a5ac12777c2b
> --- /dev/null
> +++ b/include/dt-bindings/net/qcom-qca807x.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Device Tree constants for the Qualcomm QCA807X PHYs
> + */
> +
> +#ifndef _DT_BINDINGS_QCOM_QCA807X_H
> +#define _DT_BINDINGS_QCOM_QCA807X_H
> +
> +/* Full amplitude, full bias current */
> +#define QCA807X_CONTROL_DAC_FULL_VOLT_BIAS		0
> +/* Amplitude follow DSP (amplitude is adjusted based on cable length), half bias current */
> +#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS		1
> +/* Full amplitude, bias current follow DSP (bias current is adjusted based on cable length) */
> +#define QCA807X_CONTROL_DAC_FULL_VOLT_DSP_BIAS		2
> +/* Both amplitude and bias current follow DSP */
> +#define QCA807X_CONTROL_DAC_DSP_VOLT_BIAS		3
> +/* Full amplitude, half bias current */
> +#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS		4
> +/* Amplitude follow DSP setting; 1/4 bias current when cable<10m,
> + * otherwise half bias current
> + */
> +#define QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS	5
> +/* Full amplitude; same bias current setting with “010” and “011”,
> + * but half more bias is reduced when cable <10m
> + */
> +#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS_SHORT	6
> +/* Amplitude follow DSP; same bias current setting with “110”, default value */
> +#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS_SHORT	7

Are these really properties of the board? That is what device tree is
supposed to be about. These seem like configuration options. Which
suggests they should actually be a PHY tunable.

	 Andrew