netdev - [net 05/15] net/mlx5e: Change interrupt moderation channel params also when channels are closed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210212025641.323844-6-saeed@kernel.org>
Date:   Thu, 11 Feb 2021 18:56:31 -0800
From:   Saeed Mahameed <saeed@...nel.org>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     netdev@...r.kernel.org, Maxim Mikityanskiy <maximmi@...lanox.com>,
        Tariq Toukan <tariqt@...dia.com>,
        Saeed Mahameed <saeedm@...dia.com>
Subject: [net 05/15] net/mlx5e: Change interrupt moderation channel params also when channels are closed

From: Maxim Mikityanskiy <maximmi@...lanox.com>

struct mlx5e_params contains fields ({rx,tx}_cq_moderation) that depend
on two things: whether DIM is enabled and the state of a private flag
(MLX5E_PFLAG_{RX,TX}_CQE_BASED_MODER). Whenever the DIM state changes,
mlx5e_reset_{rx,tx}_moderation is called to update the fields, however,
only if the channels are open. The flow where the channels are closed
misses the required update of the fields. This commit moves the calls of
mlx5e_reset_{rx,tx}_moderation, so that they run in both flows.

Fixes: ebeaf084ad5c ("net/mlx5e: Properly set default values when disabling adaptive moderation")
Signed-off-by: Maxim Mikityanskiy <maximmi@...lanox.com>
Reviewed-by: Tariq Toukan <tariqt@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
 .../ethernet/mellanox/mlx5/core/en_ethtool.c  | 29 +++++++++----------
 1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index d7ff5fa45cb7..8612c388db7d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -597,24 +597,9 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv,
 	tx_moder->pkts    = coal->tx_max_coalesced_frames;
 	new_channels.params.tx_dim_enabled = !!coal->use_adaptive_tx_coalesce;
 
-	if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
-		priv->channels.params = new_channels.params;
-		goto out;
-	}
-	/* we are opened */
-
 	reset_rx = !!coal->use_adaptive_rx_coalesce != priv->channels.params.rx_dim_enabled;
 	reset_tx = !!coal->use_adaptive_tx_coalesce != priv->channels.params.tx_dim_enabled;
 
-	if (!reset_rx && !reset_tx) {
-		if (!coal->use_adaptive_rx_coalesce)
-			mlx5e_set_priv_channels_rx_coalesce(priv, coal);
-		if (!coal->use_adaptive_tx_coalesce)
-			mlx5e_set_priv_channels_tx_coalesce(priv, coal);
-		priv->channels.params = new_channels.params;
-		goto out;
-	}
-
 	if (reset_rx) {
 		u8 mode = MLX5E_GET_PFLAG(&new_channels.params,
 					  MLX5E_PFLAG_RX_CQE_BASED_MODER);
@@ -628,6 +613,20 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv,
 		mlx5e_reset_tx_moderation(&new_channels.params, mode);
 	}
 
+	if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
+		priv->channels.params = new_channels.params;
+		goto out;
+	}
+
+	if (!reset_rx && !reset_tx) {
+		if (!coal->use_adaptive_rx_coalesce)
+			mlx5e_set_priv_channels_rx_coalesce(priv, coal);
+		if (!coal->use_adaptive_tx_coalesce)
+			mlx5e_set_priv_channels_tx_coalesce(priv, coal);
+		priv->channels.params = new_channels.params;
+		goto out;
+	}
+
 	err = mlx5e_safe_switch_channels(priv, &new_channels, NULL, NULL);
 
 out:
-- 
2.29.2