lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210216205330.2803064-1-robert.hancock@calian.com>
Date:   Tue, 16 Feb 2021 14:53:30 -0600
From:   Robert Hancock <robert.hancock@...ian.com>
To:     andrew@...n.ch, hkallweit1@...il.com, davem@...emloft.net,
        kuba@...nel.org
Cc:     linux@...linux.org.uk, netdev@...r.kernel.org,
        Robert Hancock <robert.hancock@...ian.com>
Subject: [PATCH net-next v2] net: phy: marvell: Ensure SGMII auto-negotiation is enabled for 88E1111

When 88E1111 is operating in SGMII mode, auto-negotiation should be enabled
on the SGMII side so that the link will come up properly with PCSes which
normally have auto-negotiation enabled. This is normally the case when the
PHY defaults to SGMII mode at power-up, however if we switched it from some
other mode like 1000Base-X, as may happen in some SFP module situations,
it may not be, particularly for modules which have 1000Base-X
auto-negotiation defaulting to disabled.

Call genphy_check_and_restart_aneg on the fiber page to ensure that auto-
negotiation is properly enabled on the SGMII interface.

Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
---

Changed since v1: Fixed typo and added more explanation in commit message

 drivers/net/phy/marvell.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3238d0fbf437..e26a5d663f8a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -684,16 +684,19 @@ static int m88e1111_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		goto error;
 
-	/* Do not touch the fiber page if we're in copper->sgmii mode */
-	if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
-		return 0;
-
 	/* Then the fiber link */
 	err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
 	if (err < 0)
 		goto error;
 
-	err = marvell_config_aneg_fiber(phydev);
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
+		/* Do not touch the fiber advertisement if we're in copper->sgmii mode.
+		 * Just ensure that SGMII-side autonegotiation is enabled.
+		 * If we switched from some other mode to SGMII it may not be.
+		 */
+		err = genphy_check_and_restart_aneg(phydev, false);
+	else
+		err = marvell_config_aneg_fiber(phydev);
 	if (err < 0)
 		goto error;
 
-- 
2.27.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ