netdev - [PATCH] drivers: net: xilinx_emaclite: remove arch limitation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 16 Feb 2021 22:33:42 +0000
From:   Gary Guo <gary@...yguo.net>
To:     unlisted-recipients:; (no To-header on input)
Cc:     Gary Guo <gary@...yguo.net>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Michal Simek <michal.simek@...inx.com>,
        Radhey Shyam Pandey <radhey.shyam.pandey@...inx.com>,
        Andre Przywara <andre.przywara@....com>,
        Andrew Lunn <andrew@...n.ch>,
        Masahiro Yamada <masahiroy@...nel.org>, netdev@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH] drivers: net: xilinx_emaclite: remove arch limitation

The changes made in eccd540 is enough for xilinx_emaclite to run
without problem on 64-bit systems. I have tested it on a Xilinx
FPGA with RV64 softcore. The architecture limitation in Kconfig
seems no longer necessary.

A small change is included to print address with %lx instead of
casting to int and print with %x.

Signed-off-by: Gary Guo <gary@...yguo.net>
---
 drivers/net/ethernet/xilinx/Kconfig           | 1 -
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 4 ++--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 3b2137d1f4c6..c6eb7f2368aa 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -18,7 +18,6 @@ if NET_VENDOR_XILINX
 
 config XILINX_EMACLITE
 	tristate "Xilinx 10/100 Ethernet Lite support"
-	depends on PPC32 || MICROBLAZE || ARCH_ZYNQ || MIPS || COMPILE_TEST
 	select PHYLIB
 	help
 	  This driver supports the 10/100 Ethernet Lite from Xilinx.
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 008b9a40faad..007840d4a807 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1193,8 +1193,8 @@ static int xemaclite_of_probe(struct platform_device *ofdev)
 	}
 
 	dev_info(dev,
-		 "Xilinx EmacLite at 0x%08X mapped to 0x%08lX, irq=%d\n",
-		 (unsigned int __force)ndev->mem_start,
+		 "Xilinx EmacLite at 0x%08lX mapped to 0x%08lX, irq=%d\n",
+		 (unsigned long __force)ndev->mem_start,
 		 (unsigned long __force)lp->base_addr, ndev->irq);
 	return 0;
 
-- 
2.20.1