lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 19 Feb 2021 11:46:23 +0100
From:   Michael Walle <michael@...le.cc>
To:     Dan Carpenter <dan.carpenter@...cle.com>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
        kernel-janitors@...r.kernel.org
Subject: Re: [PATCH v2 net-next] net: phy: icplus: call phy_restore_page()
 when phy_select_page() fails

Am 2021-02-19 11:10, schrieb Dan Carpenter:
> The comments to phy_select_page() say that "phy_restore_page() must
> always be called after this, irrespective of success or failure of this
> call."  If we don't call phy_restore_page() then we are still holding
> the phy_lock_mdio_bus() so it eventually leads to a dead lock.
> 
> Fixes: 32ab60e53920 ("net: phy: icplus: add MDI/MDIX support for 
> IP101A/G")
> Fixes: f9bc51e6cce2 ("net: phy: icplus: fix paged register access")
> Signed-off-by: Dan Carpenter <dan.carpenter@...cle.com>

Reviewed-by: Michael Walle <michael@...le.cc>

I assume, this has to go through "net" if the merge window is closed, 
no?

-michael

> ---
> v2: fix a couple other instances I missed in v1
> 
>  drivers/net/phy/icplus.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
> index 3e431737c1ba..a00a667454a9 100644
> --- a/drivers/net/phy/icplus.c
> +++ b/drivers/net/phy/icplus.c
> @@ -239,7 +239,7 @@ static int ip101a_g_config_intr_pin(struct
> phy_device *phydev)
> 
>  	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
>  	if (oldpage < 0)
> -		return oldpage;
> +		goto out;
> 
>  	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
>  	switch (priv->sel_intr32) {
> @@ -314,7 +314,7 @@ static int ip101a_g_read_status(struct phy_device 
> *phydev)
> 
>  	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
>  	if (oldpage < 0)
> -		return oldpage;
> +		goto out;
> 
>  	ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
>  	if (ret < 0)
> @@ -349,7 +349,8 @@ static int ip101a_g_read_status(struct phy_device 
> *phydev)
>  static int ip101a_g_config_mdix(struct phy_device *phydev)
>  {
>  	u16 ctrl = 0, ctrl2 = 0;
> -	int oldpage, ret;
> +	int oldpage;
> +	int ret = 0;
> 
>  	switch (phydev->mdix_ctrl) {
>  	case ETH_TP_MDI:
> @@ -367,7 +368,7 @@ static int ip101a_g_config_mdix(struct phy_device 
> *phydev)
> 
>  	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
>  	if (oldpage < 0)
> -		return oldpage;
> +		goto out;
> 
>  	ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS,
>  			   IP101A_G_AUTO_MDIX_DIS, ctrl);

-- 
-michael

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ