netdev - Re: [PATCH v2] bus: mhi: Add Qcom WWAN control driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 9 Mar 2021 09:32:39 +0100
From:   Loic Poulain <loic.poulain@...aro.org>
To:     Greg KH <gregkh@...uxfoundation.org>
Cc:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        Hemant Kumar <hemantk@...eaurora.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        Aleksander Morgado <aleksander@...ksander.es>,
        open list <linux-kernel@...r.kernel.org>,
        Jakub Kicinski <kuba@...nel.org>,
        David Miller <davem@...emloft.net>,
        Network Development <netdev@...r.kernel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>
Subject: Re: [PATCH v2] bus: mhi: Add Qcom WWAN control driver

On Tue, 9 Mar 2021 at 09:19, Greg KH <gregkh@...uxfoundation.org> wrote:
>
> On Mon, Mar 08, 2021 at 09:59:27PM +0100, Loic Poulain wrote:
> > The MHI WWWAN control driver allows MHI Qcom based modems to expose
> > different modem control protocols to userspace, so that userspace
> > modem tools or daemon (e.g. ModemManager) can control WWAN config
> > and state (APN config, SMS, provider selection...). A Qcom based
> > modem can expose one or several of the following protocols:
> > - AT: Well known AT commands interactive protocol (microcom, minicom...)
> > - MBIM: Mobile Broadband Interface Model (libmbim, mbimcli)
> > - QMI: Qcom MSM/Modem Interface (libqmi, qmicli)
> > - QCDM: Qcom Modem diagnostic interface (libqcdm)
> > - FIREHOSE: XML-based protocol for Modem firmware management
> >           (qmi-firmware-update)
> >
> > The different interfaces are exposed as character devices, in the same
> > way as for USB modem variants.
> >
> > Note that this patch is mostly a rework of the earlier MHI UCI
> > tentative that was a generic interface for accessing MHI bus from
> > userspace. As suggested, this new version is WWAN specific and is
> > dedicated to only expose channels used for controlling a modem, and
> > for which related opensource user support exist. Other MHI channels
> > not fitting the requirements will request either to be plugged to
> > the right Linux subsystem (when available) or to be discussed as a
> > new MHI driver (e.g AI accelerator, WiFi debug channels, etc...).
> >
> > Co-developed-by: Hemant Kumar <hemantk@...eaurora.org>
> > Signed-off-by: Hemant Kumar <hemantk@...eaurora.org>
> > Signed-off-by: Loic Poulain <loic.poulain@...aro.org>
> > ---
> >  v2: update copyright (2021)
> >
> >  drivers/bus/mhi/Kconfig     |  12 +
> >  drivers/bus/mhi/Makefile    |   3 +
> >  drivers/bus/mhi/wwan_ctrl.c | 559 ++++++++++++++++++++++++++++++++++++++++++++
>
> As Jakub said, why is this file in this directory?
>
> Flat out ignoring review comments is a sure way to always get pushed to
> the bottom of the list of things anyone wants to ever look at...

Yes, it's a legacy of the previous driver that was kind of a generic a
mhi bus accessor.
I'm going to move it inside network since it's about WWAN.

Thanks,
Loic


>
> greg k-h