| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210310115951.14565-1-zajec5@gmail.com>
Date: Wed, 10 Mar 2021 12:59:51 +0100
From: Rafał Miłecki <zajec5@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>
Cc: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
Rafał Miłecki <rafal@...ecki.pl>
Subject: [PATCH] net: dsa: bcm_sf2: setup BCM4908 internal crossbar
From: Rafał Miłecki <rafal@...ecki.pl>
On some SoCs (e.g. BCM4908, BCM631[345]8) SF2 has an integrated
crossbar. It allows connecting its selected external ports to internal
ports. It's used by vendors to handle custom Ethernet setups.
BCM4908 has following 3x2 crossbar. On Asus GT-AC5300 rgmii is used for
connecting external BCM53134S switch. GPHY4 is usually used for WAN
port. More fancy devices use SerDes for 2.5 Gbps Ethernet.
┌──────────┐
SerDes ─── 0 ─┤ │
│ 3x2 ├─ 0 ─── switch port 7
GPHY4 ─── 1 ─┤ │
│ crossbar ├─ 1 ─── runner (accelerator)
rgmii ─── 2 ─┤ │
└──────────┘
Use setup data based on DT info to configure BCM4908's switch port 7.
Right now only GPHY and rgmii variants are supported. Handling SerDes
can be implemented later.
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
---
drivers/net/dsa/bcm_sf2.c | 41 ++++++++++++++++++++++++++++++++++
drivers/net/dsa/bcm_sf2.h | 1 +
drivers/net/dsa/bcm_sf2_regs.h | 7 ++++++
3 files changed, 49 insertions(+)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8f50e91d4004..b4b36408f069 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -432,6 +432,40 @@ static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
return 0;
}
+static void bcm_sf2_crossbar_setup(struct bcm_sf2_priv *priv)
+{
+ struct device *dev = priv->dev->ds->dev;
+ int shift;
+ u32 mask;
+ u32 reg;
+ int i;
+
+ reg = 0;
+ switch (priv->type) {
+ case BCM4908_DEVICE_ID:
+ shift = CROSSBAR_BCM4908_INT_P7 * priv->num_crossbar_int_ports;
+ if (priv->int_phy_mask & BIT(7))
+ reg |= CROSSBAR_BCM4908_EXT_GPHY4 << shift;
+ else if (0) /* FIXME */
+ reg |= CROSSBAR_BCM4908_EXT_SERDES << shift;
+ else
+ reg |= CROSSBAR_BCM4908_EXT_RGMII << shift;
+ break;
+ default:
+ return;
+ }
+ reg_writel(priv, reg, REG_CROSSBAR);
+
+ reg = reg_readl(priv, REG_CROSSBAR);
+ mask = BIT(priv->num_crossbar_int_ports) - 1;
+ for (i = 0; i < priv->num_crossbar_int_ports; i++) {
+ shift = i * priv->num_crossbar_int_ports;
+
+ dev_dbg(dev, "crossbar in port #%d - out port #%d\n", i,
+ (reg >> shift) & mask);
+ }
+}
+
static void bcm_sf2_intr_disable(struct bcm_sf2_priv *priv)
{
intrl2_0_mask_set(priv, 0xffffffff);
@@ -856,6 +890,8 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
return ret;
}
+ bcm_sf2_crossbar_setup(priv);
+
ret = bcm_sf2_cfp_resume(ds);
if (ret)
return ret;
@@ -1128,6 +1164,7 @@ struct bcm_sf2_of_data {
const u16 *reg_offsets;
unsigned int core_reg_align;
unsigned int num_cfp_rules;
+ unsigned int num_crossbar_int_ports;
};
static const u16 bcm_sf2_4908_reg_offsets[] = {
@@ -1152,6 +1189,7 @@ static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
.core_reg_align = 0,
.reg_offsets = bcm_sf2_4908_reg_offsets,
.num_cfp_rules = 0, /* FIXME */
+ .num_crossbar_int_ports = 2,
};
/* Register offsets for the SWITCH_REG_* block */
@@ -1262,6 +1300,7 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
priv->reg_offsets = data->reg_offsets;
priv->core_reg_align = data->core_reg_align;
priv->num_cfp_rules = data->num_cfp_rules;
+ priv->num_crossbar_int_ports = data->num_crossbar_int_ports;
priv->rcdev = devm_reset_control_get_optional_exclusive(&pdev->dev,
"switch");
@@ -1335,6 +1374,8 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
goto out_clk_mdiv;
}
+ bcm_sf2_crossbar_setup(priv);
+
bcm_sf2_gphy_enable_set(priv->dev->ds, true);
ret = bcm_sf2_mdio_register(ds);
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 1ed901a68536..bf0b56313bc1 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -73,6 +73,7 @@ struct bcm_sf2_priv {
const u16 *reg_offsets;
unsigned int core_reg_align;
unsigned int num_cfp_rules;
+ unsigned int num_crossbar_int_ports;
/* spinlock protecting access to the indirect registers */
spinlock_t indir_lock;
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 1d2d55c9f8aa..e297b09411f3 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -48,6 +48,13 @@ enum bcm_sf2_reg_offs {
#define PHY_PHYAD_SHIFT 8
#define PHY_PHYAD_MASK 0x1F
+/* Relative to REG_CROSSBAR */
+#define CROSSBAR_BCM4908_INT_P7 0
+#define CROSSBAR_BCM4908_INT_RUNNER 1
+#define CROSSBAR_BCM4908_EXT_SERDES 0
+#define CROSSBAR_BCM4908_EXT_GPHY4 1
+#define CROSSBAR_BCM4908_EXT_RGMII 2
+
#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_CNTRL + (x))
/* Relative to REG_RGMII_CNTRL */
--
2.26.2
Powered by blists - more mailing lists