Message-ID: <DM6PR13MB424939CD604B0FD638A0D56C88919@DM6PR13MB4249.namprd13.prod.outlook.com>
Date:   Wed, 10 Mar 2021 07:51:32 +0000
From:   Louis Peens <louis.peens@...igine.com>
To:     "ovs-dev@...nvswitch.org" <ovs-dev@...nvswitch.org>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Simon Horman <simon.horman@...ronome.com>,
        Yinjun Zhang <yinjun.zhang@...igine.com>
Subject: [ovs-dev] tc-conntrack: inconsistent behaviour with icmpv6

Hi all

We've recently encountered an interesting situation with OVS conntrack
when offloading to the TC datapath, and would like some feedback. Sorry
about the longish wall of text, but I'm trying to explain the problem
as clearly as possible. The very short summary is that there is a mismatch
in behaviour between the OVS datapath and OVS+TC datapath, and we're
not sure how to resolve this. Here goes:

We have a set of rules looking like this:
ovs-ofctl add-flow br0 "table=0,in_port=p1,ct_state=-trk,ipv6,actions=ct(table=1)"
ovs-ofctl add-flow br0 "table=0,in_port=p2,ct_state=-trk,ipv6,actions=ct(table=1)"
#post_ct flows"
ovs-ofctl add-flow br0 "table=1,in_port=p1,ct_state=+trk+new,ipv6,actions=ct(commit),output:p2"
ovs-ofctl add-flow br0 "table=1,in_port=p2,ct_state=+trk+new,ipv6,actions=ct(commit),output:p1"
ovs-ofctl add-flow br0 "table=1,in_port=p1,ct_state=+trk+est,ipv6,actions=output:p2"
ovs-ofctl add-flow br0 "table=1,in_port=p2,ct_state=+trk+est,ipv6,actions=output:p1"

p1/p2 are the endpoints of two different veth pairs, just to keep this simple.
The rules above work well enough with UDP/TCP traffic, however ICMPv6 packets
(08:56:39.984375 IP6 2001:db8:0:f101::1 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2001:db8:0:f101::2, length 32)
breaks this somewhat. With TC offload disabled:

ovs-vsctl --no-wait set Open_vSwitch . other_config:hw-offload=false

we get the following datapath rules:

ovs-appctl dpctl/dump-flows --names
recirc_id(0x1),in_port(p1),ct_state(-new-est+trk),eth(),eth_type(0x86dd),ipv6(frag=no), packets:2, bytes:172, used:1.329s, actions:drop
recirc_id(0),in_port(p1),ct_state(-trk),eth(),eth_type(0x86dd),ipv6(frag=no), packets:2, bytes:172, used:1.329s, actions:ct,recirc(0x1)

This part is still fine, we do not have a rule for just matching +trk, so the
the drop rule is to be expected. The problem however is when we enable TC
offload:

ovs-vsctl --no-wait set Open_vSwitch . other_config:hw-offload=true

This is the result in the datapath:

ovs-appctl dpctl/dump-flows --names
ct_state(-trk),recirc_id(0),in_port(p1),eth_type(0x86dd),ipv6(frag=no), packets:2, bytes:144, used:0.920s, actions:ct,recirc(0x1)
recirc_id(0x1),in_port(p1),ct_state(-new-est-trk),eth(),eth_type(0x86dd),ipv6(frag=no), packets:1, bytes:86, used:0.928s, actions:drop
recirc_id(0x1),in_port(p1),ct_state(-new-est+trk),eth(),eth_type(0x86dd),ipv6(frag=no), packets:0, bytes:0, used:never, actions:drop

Notice the installation of the two recirc rules, one with -trk and one with +trk,
with the -trk one being the rule that handles all the next packets. Further
investigation reveals that something like the following is happening:

1) The first packet arrives and is handled by the OVS datapath,
   triggering the installation of the two rules like in the non-offloaded
   case. So the recirc_id(0) rule gets installed into tc, and recirc_id(0x1)
   gets installed into the ovs datapath. This bit of code in the OVS module
   makes sure that +trk is set.

    /* Update 'key' based on skb->_nfct.  If 'post_ct' is true, then OVS has
     * previously sent the packet to conntrack via the ct action.....
     * /
   static void ovs_ct_update_key(const struct sk_buff *skb,
                              const struct ovs_conntrack_info *info,
                              struct sw_flow_key *key, bool post_ct,
                              bool keep_nat_flags)
    {
            ...
            ct = nf_ct_get(skb, &ctinfo);
            if (ct) {//tracked
                    ...
            } else if (post_ct) {
                    state = OVS_CS_F_TRACKED | OVS_CS_F_INVALID;
                    if (info)
                            zone = &info->zone;
            }
            __ovs_ct_update_key(key, state, zone, ct);

    }
    Obviously this is not the case when the packet was sent to conntrack
    via tc.

2) The second packet arrives, and now hits the rule installed in
   TC. However, TC does not handle ICMPv6 (Neighbor Solicitation), and explicitely
   clears the tracked bit (net/netfilter/nf_conntrack_proto_icmpv6.c):

    int nf_conntrack_icmpv6_error(struct nf_conn *tmpl,
                                  struct sk_buff *skb,
                                  unsigned int dataoff,
                                  const struct nf_hook_state *state)

    {
    ...
            type = icmp6h->icmp6_type - 130;
            if (type >= 0 && type < sizeof(noct_valid_new) &&
                noct_valid_new[type]) {
                    nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
                    return NF_ACCEPT;
            }
    ...
    }
    (The above code gets triggered a few function calls down from act_ct.c)

3) So now the packet does not hit the +trk rule after the recirc, and leads
   to the installation of the "recirc_id(0x1),..-trk" rule, since +trk wasn't
   set by TC.

This is now the point where we're a bit stuck and is hoping for some ideas
on how to best resolve this. A workaround is of course just to modify the
userspace rules to not send the icmp packets to conntrack and that should
work, but it is a workaround. I think this inconsistency between TC
offload and non-TC is quite undesirable, and could lead to some interesting
results, for instance this was first detected by the observation of packets
getting stuck in a loop in the datapath:

recirc_id(0xe),...ct_state(0/0x20),....,in_port(eth9),eth_type(0x86dd),... ,dp:tc, actions:ct,recirc(0xe)

Where the userspace rule was doing ct to the same table instead of moving to the next table:

ovs-ofctl add-flow br0 "table=0,in_port=eth9,ct_state=-trk,ipv6,actions=ct(table=0)"

So far we've not managed to think of a good way to resolve this in the code.
I don't think changing the kernel behaviour would be desirable, at least
not in that specific function as that is common conntrack code. I suspect
that ideally this is something we can try and address from the OVS side,
but at this moment I have no idea how this will be achieved, hence this
email.

Looking forward to get some suggestions on this

Regards
Louis Peens

PS: Tested on:
net-next kernel:
    d310ec03a34e Merge tag 'perf-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
OVS:
    "cdaa7e0fd dpif-netdev: Fix crash when add dp flow without in_port field."
        +
    "[ovs-dev] [PATCH v3 0/3] Add offload support for ct_state rpl and inv flags"
    (The behaviour before and after the patch series in terms of the problem
     above is the same. Whether the recirc rules end up in the ovs datapath or tc
     datapath doesn't really matter)

Powered by blists - more mailing lists