[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210311201813.3804249-2-robert.hancock@calian.com>
Date: Thu, 11 Mar 2021 14:18:12 -0600
From: Robert Hancock <robert.hancock@...ian.com>
To: davem@...emloft.net, kuba@...nel.org
Cc: nicolas.ferre@...rochip.com, claudiu.beznea@...rochip.com,
linux@...linux.org.uk, netdev@...r.kernel.org,
Robert Hancock <robert.hancock@...ian.com>
Subject: [PATCH net-next 1/2] net: macb: poll for fixed link state in SGMII mode
When using a fixed-link configuration with GEM in SGMII mode, such as
for a chip-to-chip interconnect, the link state was always showing as
established regardless of the actual connectivity state. We can monitor
the pcs_link_state bit in the Network Status register to determine
whether the PCS link state is actually up.
Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
---
drivers/net/ethernet/cadence/macb_main.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 15362d016a87..ca72a16c8da3 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -847,6 +847,15 @@ static int macb_phylink_connect(struct macb *bp)
return 0;
}
+static void macb_get_pcs_fixed_state(struct phylink_config *config,
+ struct phylink_link_state *state)
+{
+ struct net_device *ndev = to_net_dev(config->dev);
+ struct macb *bp = netdev_priv(ndev);
+
+ state->link = (macb_readl(bp, NSR) & MACB_BIT(NSR_LINK)) != 0;
+}
+
/* based on au1000_eth. c*/
static int macb_mii_probe(struct net_device *dev)
{
@@ -855,6 +864,11 @@ static int macb_mii_probe(struct net_device *dev)
bp->phylink_config.dev = &dev->dev;
bp->phylink_config.type = PHYLINK_NETDEV;
+ if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
+ bp->phylink_config.poll_fixed_state = true;
+ bp->phylink_config.get_fixed_state = macb_get_pcs_fixed_state;
+ }
+
bp->phylink = phylink_create(&bp->phylink_config, bp->pdev->dev.fwnode,
bp->phy_interface, &macb_phylink_ops);
if (IS_ERR(bp->phylink)) {
--
2.27.0
Powered by blists - more mailing lists