[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210312195214.4002847-2-robert.hancock@calian.com>
Date: Fri, 12 Mar 2021 13:52:13 -0600
From: Robert Hancock <robert.hancock@...ian.com>
To: radhey.shyam.pandey@...inx.com, davem@...emloft.net,
kuba@...nel.org
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
Robert Hancock <robert.hancock@...ian.com>
Subject: [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks
Update DT bindings to describe all of the clocks that the axienet
driver will now be able to make use of.
Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
---
.../bindings/net/xilinx_axienet.txt | 25 ++++++++++++++-----
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index 2cd452419ed0..b8e4894bc634 100644
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -42,11 +42,23 @@ Optional properties:
support both 1000BaseX and SGMII modes. If set, the phy-mode
should be set to match the mode selected on core reset (i.e.
by the basex_or_sgmii core input line).
-- clocks : AXI bus clock for the device. Refer to common clock bindings.
- Used to calculate MDIO clock divisor. If not specified, it is
- auto-detected from the CPU clock (but only on platforms where
- this is possible). New device trees should specify this - the
- auto detection is only for backward compatibility.
+- clock-names: Tuple listing input clock names. Possible clocks:
+ s_axi_lite_clk: Clock for AXI register slave interface
+ axis_clk: AXI4-Stream clock for TXD RXD TXC and RXS interfaces
+ ref_clk: Ethernet reference clock, used by signal delay
+ primitives and transceivers
+ mgt_clk: MGT reference clock (used by optional internal
+ PCS/PMA PHY)
+
+ Note that if s_axi_lite_clk is not specified by name, the
+ first clock of any name is used for this. If that is also not
+ specified, the clock rate is auto-detected from the CPU clock
+ (but only on platforms where this is possible). New device
+ trees should specify all applicable clocks by name - the
+ fallbacks to an unnamed clock or to CPU clock are only for
+ backward compatibility.
+- clocks: Phandles to input clocks matching clock-names. Refer to common
+ clock bindings.
- axistream-connected: Reference to another node which contains the resources
for the AXI DMA controller used by this device.
If this is specified, the DMA-related resources from that
@@ -62,7 +74,8 @@ Example:
device_type = "network";
interrupt-parent = <µblaze_0_axi_intc>;
interrupts = <2 0 1>;
- clocks = <&axi_clk>;
+ clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+ clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
phy-mode = "mii";
reg = <0x40c00000 0x40000 0x50c00000 0x40000>;
xlnx,rxcsum = <0x2>;
--
2.27.0
Powered by blists - more mailing lists