lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3e6ecce5-188e-d2cf-69e4-ddb672236c27@huawei.com>
Date:   Mon, 15 Mar 2021 08:50:00 +0800
From:   Yunsheng Lin <linyunsheng@...wei.com>
To:     Marc Kleine-Budde <mkl@...gutronix.de>,
        Vladimir Oltean <olteanv@...il.com>
CC:     <davem@...emloft.net>, <kuba@...nel.org>, <ast@...nel.org>,
        <daniel@...earbox.net>, <andriin@...com>, <edumazet@...gle.com>,
        <weiwan@...gle.com>, <cong.wang@...edance.com>,
        <ap420073@...il.com>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linuxarm@...neuler.org>,
        <pabeni@...hat.com>, linux-can <linux-can@...r.kernel.org>
Subject: Re: [PATCH RFC] net: sched: implement TCQ_F_CAN_BYPASS for lockless
 qdisc

On 2021/3/14 18:15, Marc Kleine-Budde wrote:
> Cc += linux-can@...r.kernel.org
> 
> On 3/14/21 1:03 AM, Vladimir Oltean wrote:
>> On Sat, Mar 13, 2021 at 10:47:47AM +0800, Yunsheng Lin wrote:
>>> Currently pfifo_fast has both TCQ_F_CAN_BYPASS and TCQ_F_NOLOCK
>>> flag set, but queue discipline by-pass does not work for lockless
>>> qdisc because skb is always enqueued to qdisc even when the qdisc
>>> is empty, see __dev_xmit_skb().
>>>
>>> This patch calles sch_direct_xmit() to transmit the skb directly
>>> to the driver for empty lockless qdisc too, which aviod enqueuing
>>> and dequeuing operation. qdisc->empty is set to false whenever a
>>> skb is enqueued, and is set to true when skb dequeuing return NULL,
>>> see pfifo_fast_dequeue().
>>>
>>> Also, qdisc is scheduled at the end of qdisc_run_end() when q->empty
>>> is false to avoid packet stuck problem.
>>>
>>> The performance for ip_forward test increases about 10% with this
>>> patch.
>>>
>>> Signed-off-by: Yunsheng Lin <linyunsheng@...wei.com>
>>> ---
>>
>> I can confirm the ~10% IP forwarding throughput improvement brought by
>> this patch, but as you might be aware, there was a previous attempt to
>> add qdisc bypass to pfifo_fast by Paolo Abeni:
>> https://lore.kernel.org/netdev/661cc33a-5f65-2769-cc1a-65791cb4b131@pengutronix.de/

Thanks for mention the previous attempt to add qdisc bypass to pfifo_fast.

>> It was reverted because TX reordering was observed with SocketCAN
>> (although, presumably it should also be seen with Ethernet and such).

When writing this patch, I was more foucusing on packet stuck problem
when TCQ_F_CAN_BYPASS is added for lockless qdisc.

When I am looking at flexcan_start_xmit() used by the can driver you mentioned,
it calls netif_stop_queue() to disable the queue when sending each skb, which may
cuause other skb to be requeued, see dev_requeue_skb() called by sch_direct_xmit(),
and q->empty is still true when this happens, so other cpu may send skb directly
bypassing the requeued skb, causing an out of order problem.

I will try to deal with the above requeued skb problem, and see if there are other
timing issus beside the requeued skb problem.

Thanks for the testing again.

> 
> Thanks for testing that, I just stumbled over this patch by accident.
> 
> Marc
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ