Message-Id: <20210315053721.189-12-xieyongji@bytedance.com>
Date:   Mon, 15 Mar 2021 13:37:21 +0800
From:   Xie Yongji <xieyongji@...edance.com>
To:     mst@...hat.com, jasowang@...hat.com, stefanha@...hat.com,
        sgarzare@...hat.com, parav@...dia.com, bob.liu@...cle.com,
        hch@...radead.org, rdunlap@...radead.org, willy@...radead.org,
        viro@...iv.linux.org.uk, axboe@...nel.dk, bcrl@...ck.org,
        corbet@....net, mika.penttila@...tfour.com,
        dan.carpenter@...cle.com
Cc:     virtualization@...ts.linux-foundation.org, netdev@...r.kernel.org,
        kvm@...r.kernel.org, linux-fsdevel@...r.kernel.org
Subject: [PATCH v5 11/11] Documentation: Add documentation for VDUSE

VDUSE (vDPA Device in Userspace) is a framework to support
implementing software-emulated vDPA devices in userspace. This
document is intended to clarify the VDUSE design and usage.

Signed-off-by: Xie Yongji <xieyongji@...edance.com>
---
 Documentation/userspace-api/index.rst |   1 +
 Documentation/userspace-api/vduse.rst | 209 ++++++++++++++++++++++++++++++++++
 2 files changed, 210 insertions(+)
 create mode 100644 Documentation/userspace-api/vduse.rst

diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst
index acd2cc2a538d..f63119130898 100644
--- a/Documentation/userspace-api/index.rst
+++ b/Documentation/userspace-api/index.rst
@@ -24,6 +24,7 @@ place where this information is gathered.
    ioctl/index
    iommu
    media/index
+   vduse
 
 .. only::  subproject and html
 
diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst
new file mode 100644
index 000000000000..744a9d3452c1
--- /dev/null
+++ b/Documentation/userspace-api/vduse.rst
@@ -0,0 +1,209 @@
+==================================
+VDUSE - "vDPA Device in Userspace"
+==================================
+
+vDPA (virtio data path acceleration) device is a device that uses a
+datapath which complies with the virtio specifications with vendor
+specific control path. vDPA devices can be both physically located on
+the hardware or emulated by software. VDUSE is a framework that makes it
+possible to implement software-emulated vDPA devices in userspace.
+
+How VDUSE works
+------------
+Each userspace vDPA device is created by the VDUSE_CREATE_DEV ioctl on
+the character device (/dev/vduse/control). Then a device file with the
+specified name (/dev/vduse/$NAME) will appear, which can be used to
+implement the userspace vDPA device's control path and data path.
+
+To implement control path, a message-based communication protocol and some
+types of control messages are introduced in the VDUSE framework:
+
+- VDUSE_SET_VQ_ADDR: Set the vring address of virtqueue.
+
+- VDUSE_SET_VQ_NUM: Set the size of virtqueue
+
+- VDUSE_SET_VQ_READY: Set ready status of virtqueue
+
+- VDUSE_GET_VQ_READY: Get ready status of virtqueue
+
+- VDUSE_SET_VQ_STATE: Set the state for virtqueue
+
+- VDUSE_GET_VQ_STATE: Get the state for virtqueue
+
+- VDUSE_SET_FEATURES: Set virtio features supported by the driver
+
+- VDUSE_GET_FEATURES: Get virtio features supported by the device
+
+- VDUSE_SET_STATUS: Set the device status
+
+- VDUSE_GET_STATUS: Get the device status
+
+- VDUSE_SET_CONFIG: Write to device specific configuration space
+
+- VDUSE_GET_CONFIG: Read from device specific configuration space
+
+- VDUSE_UPDATE_IOTLB: Notify userspace to update the memory mapping in device IOTLB
+
+Those control messages are mostly based on the vdpa_config_ops in
+include/linux/vdpa.h which defines a unified interface to control
+different types of vdpa device. Userspace needs to read()/write()
+on the VDUSE device file to receive/reply those control messages
+from/to VDUSE kernel module as follows:
+
+.. code-block:: c
+
+	static int vduse_message_handler(int dev_fd)
+	{
+		int len;
+		struct vduse_dev_request req;
+		struct vduse_dev_response resp;
+
+		len = read(dev_fd, &req, sizeof(req));
+		if (len != sizeof(req))
+			return -1;
+
+		resp.request_id = req.request_id;
+
+		switch (req.type) {
+
+		/* handle different types of message */
+
+		}
+
+		len = write(dev_fd, &resp, sizeof(resp));
+		if (len != sizeof(resp))
+			return -1;
+
+		return 0;
+	}
+
+In the data path, vDPA device's iova regions will be mapped into userspace
+with the help of VDUSE_IOTLB_GET_ENTRY ioctl on the VDUSE device file:
+
+- VDUSE_IOTLB_GET_ENTRY: get a mmap'able iova region containing the specified iova.
+  Userspace can access this iova region by passing corresponding size, offset, perm
+  and fd to mmap(). For example:
+
+.. code-block:: c
+
+	static int perm_to_prot(uint8_t perm)
+	{
+		int prot = 0;
+
+		switch (perm) {
+		case VDUSE_ACCESS_WO:
+			prot |= PROT_WRITE;
+			break;
+		case VDUSE_ACCESS_RO:
+			prot |= PROT_READ;
+			break;
+		case VDUSE_ACCESS_RW:
+			prot |= PROT_READ | PROT_WRITE;
+			break;
+		}
+
+		return prot;
+	}
+
+	static void *iova_to_va(int dev_fd, uint64_t iova, uint64_t *len)
+	{
+		void *addr;
+		size_t size;
+		struct vduse_iotlb_entry entry;
+
+		entry.start = iova;
+		if (ioctl(dev_fd, VDUSE_IOTLB_GET_ENTRY, &entry))
+			return NULL;
+
+		size = entry.last - entry.start + 1;
+		*len = entry.last - iova + 1;
+		addr = mmap(0, size, perm_to_prot(entry.perm), MAP_SHARED,
+			    entry.fd, entry.offset);
+
+		if (addr == MAP_FAILED)
+			return NULL;
+
+		/* do something to cache this iova region */
+
+		return addr + iova - entry.start;
+	}
+
+Besides, the following ioctls on the VDUSE device file are provided to support
+interrupt injection and setting up eventfd for virtqueue kicks:
+
+- VDUSE_VQ_SETUP_KICKFD: set the kickfd for virtqueue, this eventfd is used
+  by VDUSE kernel module to notify userspace to consume the vring.
+
+- VDUSE_INJECT_VQ_IRQ: inject an interrupt for specific virtqueue
+
+- VDUSE_INJECT_CONFIG_IRQ: inject a config interrupt
+
+Register VDUSE device on vDPA bus
+---------------------------------
+In order to make the VDUSE device work, administrator needs to use the management
+API (netlink) to register it on vDPA bus. Some sample codes are show below:
+
+.. code-block:: c
+
+	static int netlink_add_vduse(const char *name, int device_id)
+	{
+		struct nl_sock *nlsock;
+		struct nl_msg *msg;
+		int famid;
+
+		nlsock = nl_socket_alloc();
+		if (!nlsock)
+			return -ENOMEM;
+
+		if (genl_connect(nlsock))
+			goto free_sock;
+
+		famid = genl_ctrl_resolve(nlsock, VDPA_GENL_NAME);
+		if (famid < 0)
+			goto close_sock;
+
+		msg = nlmsg_alloc();
+		if (!msg)
+			goto close_sock;
+
+		if (!genlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, famid, 0, 0,
+		    VDPA_CMD_DEV_NEW, 0))
+			goto nla_put_failure;
+
+		NLA_PUT_STRING(msg, VDPA_ATTR_DEV_NAME, name);
+		NLA_PUT_STRING(msg, VDPA_ATTR_MGMTDEV_DEV_NAME, "vduse");
+		NLA_PUT_U32(msg, VDPA_ATTR_DEV_ID, device_id);
+
+		if (nl_send_sync(nlsock, msg))
+			goto close_sock;
+
+		nl_close(nlsock);
+		nl_socket_free(nlsock);
+
+		return 0;
+	nla_put_failure:
+		nlmsg_free(msg);
+	close_sock:
+		nl_close(nlsock);
+	free_sock:
+		nl_socket_free(nlsock);
+		return -1;
+	}
+
+MMU-based IOMMU Driver
+----------------------
+VDUSE framework implements an MMU-based on-chip IOMMU driver to support
+mapping the kernel DMA buffer into the userspace iova region dynamically.
+This is mainly designed for virtio-vdpa case (kernel virtio drivers).
+
+The basic idea behind this driver is treating MMU (VA->PA) as IOMMU (IOVA->PA).
+The driver will set up MMU mapping instead of IOMMU mapping for the DMA transfer
+so that the userspace process is able to use its virtual address to access
+the DMA buffer in kernel.
+
+And to avoid security issue, a bounce-buffering mechanism is introduced to
+prevent userspace accessing the original buffer directly which may contain other
+kernel data. During the mapping, unmapping, the driver will copy the data from
+the original buffer to the bounce buffer and back, depending on the direction of
+the transfer. And the bounce-buffer addresses will be mapped into the user address
+space instead of the original one.
-- 
2.11.0

Powered by blists - more mailing lists