| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210316121823.18659-6-weifeng.voon@intel.com>
Date: Tue, 16 Mar 2021 20:18:23 +0800
From: Voon Weifeng <weifeng.voon@...el.com>
To: "David S . Miller" <davem@...emloft.net>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Jose Abreu <joabreu@...opsys.com>,
Jakub Kicinski <kuba@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Andrew Lunn <andrew@...n.ch>,
Alexandre Torgue <alexandre.torgue@...com>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
Ong Boon Leong <boon.leong.ong@...el.com>,
Voon Weifeng <weifeng.voon@...el.com>,
Wong Vee Khee <vee.khee.wong@...el.com>
Subject: [RESEND v1 net-next 5/5] net: stmmac: use interrupt mode INTM=1 for multi-MSI
From: "Wong, Vee Khee" <vee.khee.wong@...el.com>
For interrupt mode INTM=0, TX/RX transfer complete will trigger signal
not only on sbd_perch_[tx|rx]_intr_o (Transmit/Receive Per Channel) but
also on the sbd_intr_o (Common).
As for multi-MSI implementation, setting interrupt mode INTM=1 is more
efficient as each TX intr and RX intr (TI/RI) will be handled by TX/RX ISR
without the need of calling the common MAC ISR.
Updated the TX/RX NORMAL interrupts status checking process as the
NIS status bit is not asserted for any RI/TI events for INTM=1.
Signed-off-by: Wong, Vee Khee <vee.khee.wong@...el.com>
Co-developed-by: Voon Weifeng <weifeng.voon@...el.com>
Signed-off-by: Voon Weifeng <weifeng.voon@...el.com>
---
.../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 8 +++++++
.../net/ethernet/stmicro/stmmac/dwmac4_dma.h | 3 +++
.../net/ethernet/stmicro/stmmac/dwmac4_lib.c | 23 +++++++++----------
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 1 +
include/linux/stmmac.h | 1 +
5 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 62aa0e95beb7..3c33b9a5b291 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -161,6 +161,14 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
value |= DMA_SYS_BUS_EAME;
writel(value, ioaddr + DMA_SYS_BUS_MODE);
+
+ value = readl(ioaddr + DMA_BUS_MODE);
+
+ if (dma_cfg->multi_msi_en) {
+ value &= ~DMA_BUS_MODE_INTM_MASK;
+ value |= (DMA_BUS_MODE_INTM_MODE1 << DMA_BUS_MODE_INTM_SHIFT);
+ }
+ writel(value, ioaddr + DMA_BUS_MODE);
}
static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index 5c0c53832adb..05481eb13ba6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -25,6 +25,9 @@
#define DMA_TBS_CTRL 0x00001050
/* DMA Bus Mode bitmap */
+#define DMA_BUS_MODE_INTM_MASK GENMASK(17, 16)
+#define DMA_BUS_MODE_INTM_SHIFT 16
+#define DMA_BUS_MODE_INTM_MODE1 0x1
#define DMA_BUS_MODE_SFT_RESET BIT(0)
/* DMA SYS Bus Mode bitmap */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index 3fa602dabf49..e63270267578 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -166,20 +166,19 @@ int dwmac4_dma_interrupt(void __iomem *ioaddr,
}
}
/* TX/RX NORMAL interrupts */
- if (likely(intr_status & DMA_CHAN_STATUS_NIS)) {
+ if (likely(intr_status & DMA_CHAN_STATUS_NIS))
x->normal_irq_n++;
- if (likely(intr_status & DMA_CHAN_STATUS_RI)) {
- x->rx_normal_irq_n++;
- ret |= handle_rx;
- }
- if (likely(intr_status & (DMA_CHAN_STATUS_TI |
- DMA_CHAN_STATUS_TBU))) {
- x->tx_normal_irq_n++;
- ret |= handle_tx;
- }
- if (unlikely(intr_status & DMA_CHAN_STATUS_ERI))
- x->rx_early_irq++;
+ if (likely(intr_status & DMA_CHAN_STATUS_RI)) {
+ x->rx_normal_irq_n++;
+ ret |= handle_rx;
+ }
+ if (likely(intr_status & (DMA_CHAN_STATUS_TI |
+ DMA_CHAN_STATUS_TBU))) {
+ x->tx_normal_irq_n++;
+ ret |= handle_tx;
}
+ if (unlikely(intr_status & DMA_CHAN_STATUS_ERI))
+ x->rx_early_irq++;
writel(intr_status & intr_en, ioaddr + DMA_CHAN_STATUS(chan));
return ret;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index efc35434b9af..d23722e86721 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5401,6 +5401,7 @@ int stmmac_dvr_probe(struct device *device,
priv->plat = plat_dat;
priv->ioaddr = res->addr;
priv->dev->base_addr = (unsigned long)res->addr;
+ priv->plat->dma_cfg->multi_msi_en = priv->plat->multi_msi_en;
priv->dev->irq = res->irq;
priv->wol_irq = res->wol_irq;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index cb260a04df80..e35224ce61cc 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -96,6 +96,7 @@ struct stmmac_dma_cfg {
int mixed_burst;
bool aal;
bool eame;
+ bool multi_msi_en;
};
#define AXI_BLEN 7
--
2.17.1
Powered by blists - more mailing lists