netdev - [PATCH net-next 1/7] mlxsw: reg: Add egr_et

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210317103529.2903172-2-idosch@idosch.org>
Date:   Wed, 17 Mar 2021 12:35:23 +0200
From:   Ido Schimmel <idosch@...sch.org>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, kuba@...nel.org, jiri@...dia.com,
        amcohen@...dia.com, petrm@...dia.com, mlxsw@...dia.com,
        Ido Schimmel <idosch@...dia.com>
Subject: [PATCH net-next 1/7] mlxsw: reg: Add egr_et_set field to SPVID

From: Amit Cohen <amcohen@...dia.com>

SPVID.egr_et_set=1 means that when VLAN is pushed at ingress (for untagged
packets or for QinQ push mode) then the EtherType is decided at the egress
port.

The next patches will use this field for VxLAN devices (tunnel port) in
order to allow using dual VxLAN bridges (802.1d and 802.1ad at the same
time).

Signed-off-by: Amit Cohen <amcohen@...dia.com>
Signed-off-by: Ido Schimmel <idosch@...dia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 44f836246e33..626f5e5c8a93 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -842,6 +842,14 @@ MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8);
  */
 MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8);
 
+/* reg_spvid_egr_et_set
+ * When VLAN is pushed at ingress (for untagged packets or for
+ * QinQ push mode) then the EtherType is decided at the egress port.
+ * Reserved when Spectrum-1.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvid, egr_et_set, 0x04, 24, 1);
+
 /* reg_spvid_et_vlan
  * EtherType used for when VLAN is pushed at ingress (for untagged
  * packets or for QinQ push mode).
@@ -849,6 +857,7 @@ MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8);
  * 1: ether_type1
  * 2: ether_type2 - Reserved when Spectrum-1, supported by Spectrum-2
  * Ethertype IDs are configured by SVER.
+ * Reserved when egr_et_set = 1.
  * Access: RW
  */
 MLXSW_ITEM32(reg, spvid, et_vlan, 0x04, 16, 2);
-- 
2.29.2