[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210317134643.24463-1-kabel@kernel.org>
Date: Wed, 17 Mar 2021 14:46:39 +0100
From: Marek Behún <kabel@...nel.org>
To: netdev@...r.kernel.org, pavana.sharma@...i.com,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
olteanv@...il.com, andrew@...n.ch, ashkan.boldaji@...i.com,
davem@...emloft.net, kuba@...nel.org
Cc: f.fainelli@...il.com, vivien.didelot@...il.com, lkp@...el.com,
Marek Behún <kabel@...nel.org>
Subject: [PATCH net-next v17 0/4] Add support for mv88e6393x family of Marvell
Hello,
after 2 months I finally had time to send v17 of Amethyst patches.
This series is tested on Marvell CN9130-CRB.
Changes since v16:
- dropped patches adding 5gbase-r, since they are already merged
- rebased onto net-next/master
- driver API renamed set_egress_flood() method into 2 methods for
ucast/mcast floods, so this is fixed
Changes from v15:
- put 10000baseKR_Full back into phylink_validate method for Amethyst,
it seems I misunderstood the meaning behind things and removed it
from v15
- removed erratum 3.7, since the procedure is done anyway in
mv88e6390_serdes_pcs_config
- renumbered errata 3.6 and 3.8 to 4.6 and 4.8, according to newer
version of the errata document
- refactored errata code a little and removed duplicate macro
definitions (for example MV88E6390_SGMII_CONTROL is already called
MV88E6390_SGMII_BMCR)
Changes from v14:
- added my Signed-off-by tags to Pavana's patches, since I am sending
them (as suggested by Andrew)
- added documentation to second patch adding 5gbase-r mode (as requested
by Russell)
- added Reviewed-by tags
- applied Vladimir's suggestions:
- reduced indentation level in mv88e6xxx_set_egress_port and
mv88e6393x_serdes_port_config
- removed 10000baseKR_Full from mv88e6393x_phylink_validate
- removed PHY_INTERFACE_MODE_10GKR from mv88e6xxx_port_set_cmode
Changes from v13:
- added patch that wraps .set_egress_port into mv88e6xxx_set_egress_port,
so that we do not have to set chip->*gress_dest_port members in every
implementation of this method
- for the patch that adds Amethyst support:
- added more information into commit message
- added these methods for mv88e6393x_ops:
.port_sync_link
.port_setup_message_port
.port_max_speed_mode (new implementation needed)
.atu_get_hash
.atu_set_hash
.serdes_pcs_config
.serdes_pcs_an_restart
.serdes_pcs_link_up
- this device can set upstream port per port, so implement
.port_set_upstream_port
instead of
.set_cpu_port
- removed USXGMII cmode (not yet supported, working on it)
- added debug messages into mv88e6393x_port_set_speed_duplex
- added Amethyst errata 4.5 (EEE should be disabled on SERDES ports)
- fixed 5gbase-r serdes configuration and interrupt handling
- refactored mv88e6393x_serdes_setup_errata
- refactored mv88e6393x_port_policy_write
- added patch implementing .port_set_policy for Amethyst
Marek
Marek Behún (2):
net: dsa: mv88e6xxx: wrap .set_egress_port method
net: dsa: mv88e6xxx: implement .port_set_policy for Amethyst
Pavana Sharma (2):
net: dsa: mv88e6xxx: change serdes lane parameter type from u8 type to
int
net: dsa: mv88e6xxx: add support for mv88e6393x family
drivers/net/dsa/mv88e6xxx/chip.c | 233 +++++++++++++---
drivers/net/dsa/mv88e6xxx/chip.h | 20 +-
drivers/net/dsa/mv88e6xxx/global1.c | 19 +-
drivers/net/dsa/mv88e6xxx/global1.h | 2 +
drivers/net/dsa/mv88e6xxx/global2.h | 8 +
drivers/net/dsa/mv88e6xxx/port.c | 397 +++++++++++++++++++++++++---
drivers/net/dsa/mv88e6xxx/port.h | 48 ++++
drivers/net/dsa/mv88e6xxx/serdes.c | 338 ++++++++++++++++++++---
drivers/net/dsa/mv88e6xxx/serdes.h | 98 ++++---
9 files changed, 1002 insertions(+), 161 deletions(-)
--
2.26.2
Powered by blists - more mailing lists