| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210318100215.15795-2-naveenm@marvell.com>
Date: Thu, 18 Mar 2021 15:32:12 +0530
From: Naveen Mamindlapalli <naveenm@...vell.com>
To: <netdev@...r.kernel.org>, <davem@...emloft.net>, <kuba@...nel.org>
CC: <sgoutham@...vell.com>, <sbhatta@...vell.com>,
<hkelam@...vell.com>, <jerinj@...vell.com>, <lcherian@...vell.com>,
<gakula@...vell.com>, "Naveen Mamindlapalli" <naveenm@...vell.com>
Subject: [PATCH net-next 1/4] octeontx2-pf: Add ip tos and ip proto icmp/icmpv6 flow offload support
Add support for programming the HW MCAM match key with IP tos, IP(v6)
proto icmp/icmpv6, allowing flow offload rules to be installed using
those fields. The NPC HW extracts layer type, which will be used as a
matching criteria for different IP protocols.
The ethtool n-tuple filter logic has been updated to parse the IP tos
and l4proto for HW offloading. l4proto tcp/udp/sctp/ah/esp/icmp are
supported. See example usage below.
Ex: Redirect l4proto icmp to vf 0 queue 0
ethtool -U eth0 flow-type ip4 l4proto 1 action vf 0 queue 0
Ex: Redirect flow with ip tos 8 to vf 0 queue 0
ethtool -U eth0 flow-type ip4 tos 8 vf 0 queue 0
Signed-off-by: Naveen Mamindlapalli <naveenm@...vell.com>
---
drivers/net/ethernet/marvell/octeontx2/af/npc.h | 2 ++
.../net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 17 +++++++--
.../ethernet/marvell/octeontx2/nic/otx2_flows.c | 42 ++++++++++++++++++++--
3 files changed, 57 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
index 0675c55dcc7a..1e012e787260 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
@@ -167,6 +167,8 @@ enum key_fields {
NPC_IPPROTO_SCTP,
NPC_IPPROTO_AH,
NPC_IPPROTO_ESP,
+ NPC_IPPROTO_ICMP,
+ NPC_IPPROTO_ICMP6,
NPC_SPORT_TCP,
NPC_DPORT_TCP,
NPC_SPORT_UDP,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
index d805a189a268..7f35b62eea13 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
@@ -29,6 +29,8 @@ static const char * const npc_flow_names[] = {
[NPC_IPPROTO_TCP] = "ip proto tcp",
[NPC_IPPROTO_UDP] = "ip proto udp",
[NPC_IPPROTO_SCTP] = "ip proto sctp",
+ [NPC_IPPROTO_ICMP] = "ip proto icmp",
+ [NPC_IPPROTO_ICMP6] = "ip proto icmp6",
[NPC_IPPROTO_AH] = "ip proto AH",
[NPC_IPPROTO_ESP] = "ip proto ESP",
[NPC_SPORT_TCP] = "tcp source port",
@@ -427,6 +429,7 @@ do { \
* packet header fields below.
* Example: Source IP is 4 bytes and starts at 12th byte of IP header
*/
+ NPC_SCAN_HDR(NPC_TOS, NPC_LID_LC, NPC_LT_LC_IP, 1, 1);
NPC_SCAN_HDR(NPC_SIP_IPV4, NPC_LID_LC, NPC_LT_LC_IP, 12, 4);
NPC_SCAN_HDR(NPC_DIP_IPV4, NPC_LID_LC, NPC_LT_LC_IP, 16, 4);
NPC_SCAN_HDR(NPC_SIP_IPV6, NPC_LID_LC, NPC_LT_LC_IP6, 8, 16);
@@ -477,9 +480,12 @@ static void npc_set_features(struct rvu *rvu, int blkaddr, u8 intf)
BIT_ULL(NPC_IPPROTO_SCTP);
}
- /* for AH, check if corresponding layer type is present in the key */
- if (npc_check_field(rvu, blkaddr, NPC_LD, intf))
+ /* for AH/ICMP/ICMPv6/, check if corresponding layer type is present in the key */
+ if (npc_check_field(rvu, blkaddr, NPC_LD, intf)) {
*features |= BIT_ULL(NPC_IPPROTO_AH);
+ *features |= BIT_ULL(NPC_IPPROTO_ICMP);
+ *features |= BIT_ULL(NPC_IPPROTO_ICMP6);
+ }
/* for ESP, check if corresponding layer type is present in the key */
if (npc_check_field(rvu, blkaddr, NPC_LE, intf))
@@ -769,6 +775,12 @@ static void npc_update_flow(struct rvu *rvu, struct mcam_entry *entry,
if (features & BIT_ULL(NPC_IPPROTO_SCTP))
npc_update_entry(rvu, NPC_LD, entry, NPC_LT_LD_SCTP,
0, ~0ULL, 0, intf);
+ if (features & BIT_ULL(NPC_IPPROTO_ICMP))
+ npc_update_entry(rvu, NPC_LD, entry, NPC_LT_LD_ICMP,
+ 0, ~0ULL, 0, intf);
+ if (features & BIT_ULL(NPC_IPPROTO_ICMP6))
+ npc_update_entry(rvu, NPC_LD, entry, NPC_LT_LD_ICMP6,
+ 0, ~0ULL, 0, intf);
if (features & BIT_ULL(NPC_OUTER_VID))
npc_update_entry(rvu, NPC_LB, entry,
@@ -798,6 +810,7 @@ do { \
NPC_WRITE_FLOW(NPC_SMAC, smac, smac_val, 0, smac_mask, 0);
NPC_WRITE_FLOW(NPC_ETYPE, etype, ntohs(pkt->etype), 0,
ntohs(mask->etype), 0);
+ NPC_WRITE_FLOW(NPC_TOS, tos, pkt->tos, 0, mask->tos, 0);
NPC_WRITE_FLOW(NPC_SIP_IPV4, ip4src, ntohl(pkt->ip4src), 0,
ntohl(mask->ip4src), 0);
NPC_WRITE_FLOW(NPC_DIP_IPV4, ip4dst, ntohl(pkt->ip4dst), 0,
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
index 0dbbf38e0597..3264cb793f02 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
@@ -301,6 +301,35 @@ static int otx2_prepare_ipv4_flow(struct ethtool_rx_flow_spec *fsp,
sizeof(pmask->ip4dst));
req->features |= BIT_ULL(NPC_DIP_IPV4);
}
+ if (ipv4_usr_mask->tos) {
+ pkt->tos = ipv4_usr_hdr->tos;
+ pmask->tos = ipv4_usr_mask->tos;
+ req->features |= BIT_ULL(NPC_TOS);
+ }
+ if (ipv4_usr_mask->proto) {
+ switch (ipv4_usr_hdr->proto) {
+ case IPPROTO_ICMP:
+ req->features |= BIT_ULL(NPC_IPPROTO_ICMP);
+ break;
+ case IPPROTO_TCP:
+ req->features |= BIT_ULL(NPC_IPPROTO_TCP);
+ break;
+ case IPPROTO_UDP:
+ req->features |= BIT_ULL(NPC_IPPROTO_UDP);
+ break;
+ case IPPROTO_SCTP:
+ req->features |= BIT_ULL(NPC_IPPROTO_SCTP);
+ break;
+ case IPPROTO_AH:
+ req->features |= BIT_ULL(NPC_IPPROTO_AH);
+ break;
+ case IPPROTO_ESP:
+ req->features |= BIT_ULL(NPC_IPPROTO_ESP);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ }
pkt->etype = cpu_to_be16(ETH_P_IP);
pmask->etype = cpu_to_be16(0xFFFF);
req->features |= BIT_ULL(NPC_ETYPE);
@@ -325,6 +354,11 @@ static int otx2_prepare_ipv4_flow(struct ethtool_rx_flow_spec *fsp,
sizeof(pmask->ip4dst));
req->features |= BIT_ULL(NPC_DIP_IPV4);
}
+ if (ipv4_l4_mask->tos) {
+ pkt->tos = ipv4_l4_hdr->tos;
+ pmask->tos = ipv4_l4_mask->tos;
+ req->features |= BIT_ULL(NPC_TOS);
+ }
if (ipv4_l4_mask->psrc) {
memcpy(&pkt->sport, &ipv4_l4_hdr->psrc,
sizeof(pkt->sport));
@@ -375,10 +409,14 @@ static int otx2_prepare_ipv4_flow(struct ethtool_rx_flow_spec *fsp,
sizeof(pmask->ip4dst));
req->features |= BIT_ULL(NPC_DIP_IPV4);
}
+ if (ah_esp_mask->tos) {
+ pkt->tos = ah_esp_hdr->tos;
+ pmask->tos = ah_esp_mask->tos;
+ req->features |= BIT_ULL(NPC_TOS);
+ }
/* NPC profile doesn't extract AH/ESP header fields */
- if ((ah_esp_mask->spi & ah_esp_hdr->spi) ||
- (ah_esp_mask->tos & ah_esp_mask->tos))
+ if (ah_esp_mask->spi & ah_esp_hdr->spi)
return -EOPNOTSUPP;
if (flow_type == AH_V4_FLOW)
--
2.16.5
Powered by blists - more mailing lists