netdev - Regression v5.12-rc3: net: stmmac: re-init rx buffers when mac resume back

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <708edb92-a5df-ecc4-3126-5ab36707e275@nvidia.com>
Date:   Wed, 24 Mar 2021 10:50:38 +0000
From:   Jon Hunter <jonathanh@...dia.com>
To:     Joakim Zhang <qiangqing.zhang@....com>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-tegra <linux-tegra@...r.kernel.org>,
        Jakub Kicinski <kuba@...nel.org>
Subject: Regression v5.12-rc3: net: stmmac: re-init rx buffers when mac resume
 back

Hi Joakim,

Starting with v5.12-rc3 I noticed that one of our boards, Tegra186
Jetson TX2, was not long resuming from suspend. Bisect points to commit
9c63faaa931e ("net: stmmac: re-init rx buffers when mac resume back")
and reverting this on top of mainline fixes the problem.

Interestingly, the board appears to partially resume from suspend and I
see ethernet appear to resume ...

 dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii link
 mode
 dwmac4: Master AXI performs any burst length
 dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow
 control rx/tx

I don't see any crash, but then it hangs at some point. Please note that
this board is using NFS for mounting the rootfs.

Let me know if there is any more info I can provide or tests I can run.

Thanks
Jon