netdev - [PATCH net-next v2 05/12] net: phy: marvell10g: add MACTYPE definitions for 88X33X0/88X33X0P

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210325131250.15901-6-kabel@kernel.org>
Date:   Thu, 25 Mar 2021 14:12:43 +0100
From:   Marek Behún <kabel@...nel.org>
To:     netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
        "David S . Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <rmk+kernel@...linux.org.uk>, kuba@...nel.org
Cc:     Marek Behún <kabel@...nel.org>
Subject: [PATCH net-next v2 05/12] net: phy: marvell10g: add MACTYPE definitions for 88X33X0/88X33X0P

Add all MACTYPE definitions for 88X3310, 88X3310P, 88X3340 and 88X3340P.

In order to have consistent naming, rename
MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH to
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH.

Signed-off-by: Marek Behún <kabel@...nel.org>
---
 drivers/net/phy/marvell10g.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 7552a658a513..7d9a45437b69 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -78,10 +78,18 @@ enum {
 
 	/* Vendor2 MMD registers */
 	MV_V2_PORT_CTRL		= 0xf001,
-	MV_V2_PORT_CTRL_PWRDOWN			= BIT(11),
-	MV_V2_33X0_PORT_CTRL_SWRST		= BIT(15),
-	MV_V2_33X0_PORT_CTRL_MACTYPE_MASK	= 0x7,
-	MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH	= 0x6,
+	MV_V2_PORT_CTRL_PWRDOWN					= BIT(11),
+	MV_V2_33X0_PORT_CTRL_SWRST				= BIT(15),
+	MV_V2_33X0_PORT_CTRL_MACTYPE_MASK			= 0x7,
+	MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI			= 0x0,
+	MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH		= 0x1,
+	MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN		= 0x1,
+	MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH		= 0x2,
+	MV_V2_3310_PORT_CTRL_MACTYPE_XAUI			= 0x3,
+	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER			= 0x4,
+	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN	= 0x5,
+	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH	= 0x6,
+	MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII			= 0x7,
 	/* Temperature control/read registers (88X3310 only) */
 	MV_V2_TEMP_CTRL		= 0xf08a,
 	MV_V2_TEMP_CTRL_MASK	= 0xc000,
@@ -480,7 +488,7 @@ static int mv3310_config_init(struct phy_device *phydev)
 	if (val < 0)
 		return val;
 	priv->rate_match = ((val & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK) ==
-			MV_V2_33X0_PORT_CTRL_MACTYPE_RATE_MATCH);
+			MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH);
 
 	/* Enable EDPD mode - saving 600mW */
 	return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
-- 
2.26.2