Message-Id: <f31534987e106fa277efe811c4ca86cdd26841f9.1617067968.git.andreas.a.roeseler@gmail.com>
Date:   Mon, 29 Mar 2021 18:45:51 -0700
From:   Andreas Roeseler <andreas.a.roeseler@...il.com>
To:     netdev@...r.kernel.org
Cc:     davem@...emloft.net, yoshfuji@...ux-ipv6.org, dsahern@...nel.org,
        kuba@...nel.org, Andreas Roeseler <andreas.a.roeseler@...il.com>
Subject: [PATCH net-next V6 6/6] icmp: add response to RFC 8335 PROBE messages

Modify the icmp_rcv function to check PROBE messages and call icmp_echo
if a PROBE request is detected.

Modify the existing icmp_echo function to respond ot both ping and PROBE
requests.

This was tested using a custom modification to the iputils package and
wireshark. It supports IPV4 probing by name, ifindex, and probing by
both IPV4 and IPV6 addresses. It currently does not support responding
to probes off the proxy node (see RFC 8335 Section 2).

The modification to the iputils package is still in development and can
be found here: https://github.com/Juniper-Clinic-2020/iputils.git. It
supports full sending functionality of PROBE requests, but currently
does not parse the response messages, which is why Wireshark is required
to verify the sent and recieved PROBE messages. The modification adds
the ``-e'' flag to the command which allows the user to specify the
interface identifier to query the probed host. An example usage would be
<./ping -4 -e 1 [destination]> to send a PROBE request of ifindex 1 to the
destination node.

Signed-off-by: Andreas Roeseler <andreas.a.roeseler@...il.com>
---
Changes:
v1 -> v2:
 - Reorder variable declarations to follow coding style
 - Switch to functions such as dev_get_by_name and ip_dev_find to lookup
   net devices

v2 -> v3:
Suggested by Willem de Bruijn <willemdebruijn.kernel@...il.com>
 - Add verification of incoming messages before looking up netdev
Reported-by: kernel test robot <lkp@...el.com>
Reported-by: Dan Carpenter <dan.carpenter@...cle.com>
 - Include net/addrconf.h library for ipv6_dev_find

v3 -> v4:
Suggested by Willem de Bruijn <willemdebruijn.kernel@...il.com>
 - Use skb_header_pointer to verify fields in incoming message
 - Add check to ensure that extobj_hdr.length is valid
 - Check to ensure object payload is padded with ASCII NULL characters
   when probing by name, as specified by RFC 8335
 - Statically allocate buff using IFNAMSIZ
 - Add rcu blocking around ipv6_dev_find
 - Use __in_dev_get_rcu to access IPV4 addresses of identified
   net_device
 - Remove check for ICMPV6 PROBE types

v4 -> v5:
 - Statically allocate buff to size IFNAMSIZ on declaration
 - Remove goto probe in favor of single branch
 - Remove strict check for incoming PROBE requests padding to nearest
   32-bit boundary
Reported-by: kernel test robot <lkp@...el.com>
 - Use rcu_dereference when accessing i6_ptr in net_device

v5 -> v6:
 - Remove RCU locking around ipv6_dev_find()
 - Assign iio based on length specified by ctype
---
 net/ipv4/icmp.c | 134 +++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 121 insertions(+), 13 deletions(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 616e2dc1c8fa..76990e13a2f9 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -971,7 +971,7 @@ static bool icmp_redirect(struct sk_buff *skb)
 }
 
 /*
- *	Handle ICMP_ECHO ("ping") requests.
+ *	Handle ICMP_ECHO ("ping") and ICMP_EXT_ECHO ("PROBE") requests.
  *
  *	RFC 1122: 3.2.2.6 MUST have an echo server that answers ICMP echo
  *		  requests.
@@ -979,27 +979,125 @@ static bool icmp_redirect(struct sk_buff *skb)
  *		  included in the reply.
  *	RFC 1812: 4.3.3.6 SHOULD have a config option for silently ignoring
  *		  echo requests, MUST have default=NOT.
+ *	RFC 8335: 8 MUST have a config option to enable/disable ICMP
+ *		  Extended Echo Functionality, MUST be disabled by default
  *	See also WRT handling of options once they are done and working.
  */
 
 static bool icmp_echo(struct sk_buff *skb)
 {
+	struct icmp_ext_hdr *ext_hdr, _ext_hdr;
+	struct icmp_ext_echo_iio *iio, _iio;
+	struct icmp_bxm icmp_param;
+	struct net_device *dev;
+	char buff[IFNAMSIZ];
 	struct net *net;
+	u16 ident_len;
+	u8 status;
 
 	net = dev_net(skb_dst(skb)->dev);
-	if (!net->ipv4.sysctl_icmp_echo_ignore_all) {
-		struct icmp_bxm icmp_param;
+	/* should there be an ICMP stat for ignored echos? */
+	if (net->ipv4.sysctl_icmp_echo_ignore_all)
+		return true;
+
+	icmp_param.data.icmph	   = *icmp_hdr(skb);
+	icmp_param.skb		   = skb;
+	icmp_param.offset	   = 0;
+	icmp_param.data_len	   = skb->len;
+	icmp_param.head_len	   = sizeof(struct icmphdr);
 
-		icmp_param.data.icmph	   = *icmp_hdr(skb);
+	if (icmp_param.data.icmph.type == ICMP_ECHO) {
 		icmp_param.data.icmph.type = ICMP_ECHOREPLY;
-		icmp_param.skb		   = skb;
-		icmp_param.offset	   = 0;
-		icmp_param.data_len	   = skb->len;
-		icmp_param.head_len	   = sizeof(struct icmphdr);
-		icmp_reply(&icmp_param, skb);
+		goto send_reply;
 	}
-	/* should there be an ICMP stat for ignored echos? */
-	return true;
+	if (!net->ipv4.sysctl_icmp_echo_enable_probe)
+		return true;
+	/* We currently only support probing interfaces on the proxy node
+	 * Check to ensure L-bit is set
+	 */
+	if (!(ntohs(icmp_param.data.icmph.un.echo.sequence) & 1))
+		return true;
+	/* Clear status bits in reply message */
+	icmp_param.data.icmph.un.echo.sequence &= htons(0xFF00);
+	icmp_param.data.icmph.type = ICMP_EXT_ECHOREPLY;
+	ext_hdr = skb_header_pointer(skb, 0, sizeof(_ext_hdr), &_ext_hdr);
+	/* Size of iio is class_type dependent.
+	 * Only check header here and assign length based on ctype in the switch statement
+	 */
+	iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(iio->extobj_hdr), &_iio);
+	if (!ext_hdr || !iio)
+		goto send_mal_query;
+	if (ntohs(iio->extobj_hdr.length) <= sizeof(iio->extobj_hdr))
+		goto send_mal_query;
+	ident_len = ntohs(iio->extobj_hdr.length) - sizeof(iio->extobj_hdr);
+	status = 0;
+	dev = NULL;
+	switch (iio->extobj_hdr.class_type) {
+	case EXT_ECHO_CTYPE_NAME:
+		iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(_iio), &_iio);
+		if (ident_len >= IFNAMSIZ)
+			goto send_mal_query;
+		memset(buff, 0, sizeof(buff));
+		memcpy(buff, &iio->ident.name, ident_len);
+		dev = dev_get_by_name(net, buff);
+		break;
+	case EXT_ECHO_CTYPE_INDEX:
+		iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(iio->extobj_hdr) +
+					 sizeof(iio->ident.ifindex), &_iio);
+		if (ident_len != sizeof(iio->ident.ifindex))
+			goto send_mal_query;
+		dev = dev_get_by_index(net, ntohl(iio->ident.ifindex));
+		break;
+	case EXT_ECHO_CTYPE_ADDR:
+		if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) +
+				 iio->ident.addr.ctype3_hdr.addrlen)
+			goto send_mal_query;
+		switch (ntohs(iio->ident.addr.ctype3_hdr.afi)) {
+		case ICMP_AFI_IP:
+			iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(iio->extobj_hdr) +
+						 sizeof(struct in_addr), &_iio);
+			if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) +
+					 sizeof(struct in_addr))
+				goto send_mal_query;
+			dev = ip_dev_find(net, iio->ident.addr.ip_addr.ipv4_addr.s_addr);
+			break;
+#if IS_ENABLED(CONFIG_IPV6)
+		case ICMP_AFI_IP6:
+			iio = skb_header_pointer(skb, sizeof(_ext_hdr), sizeof(_iio), &_iio);
+			if (ident_len != sizeof(iio->ident.addr.ctype3_hdr) +
+					 sizeof(struct in6_addr))
+				goto send_mal_query;
+			dev = ipv6_stub->ipv6_dev_find(net, &iio->ident.addr.ip_addr.ipv6_addr, dev);
+			if (dev)
+				dev_hold(dev);
+			break;
+#endif
+		default:
+			goto send_mal_query;
+		}
+		break;
+	default:
+		goto send_mal_query;
+	}
+	if (!dev) {
+		icmp_param.data.icmph.code = ICMP_EXT_NO_IF;
+		goto send_reply;
+	}
+	/* Fill bits in reply message */
+	if (dev->flags & IFF_UP)
+		status |= EXT_ECHOREPLY_ACTIVE;
+	if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)
+		status |= EXT_ECHOREPLY_IPV4;
+	if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list))
+		status |= EXT_ECHOREPLY_IPV6;
+	dev_put(dev);
+	icmp_param.data.icmph.un.echo.sequence |= htons(status);
+send_reply:
+	icmp_reply(&icmp_param, skb);
+		return true;
+send_mal_query:
+	icmp_param.data.icmph.code = ICMP_EXT_MAL_QUERY;
+	goto send_reply;
 }
 
 /*
@@ -1088,6 +1186,16 @@ int icmp_rcv(struct sk_buff *skb)
 	icmph = icmp_hdr(skb);
 
 	ICMPMSGIN_INC_STATS(net, icmph->type);
+
+	/* Check for ICMP Extended Echo (PROBE) messages */
+	if (icmph->type == ICMP_EXT_ECHO) {
+		/* We can't use icmp_pointers[].handler() because it is an array of
+		 * size NR_ICMP_TYPES + 1 (19 elements) and PROBE has code 42.
+		 */
+		success = icmp_echo(skb);
+		goto success_check;
+	}
+
 	/*
 	 *	18 is the highest 'known' ICMP type. Anything else is a mystery
 	 *
@@ -1097,7 +1205,6 @@ int icmp_rcv(struct sk_buff *skb)
 	if (icmph->type > NR_ICMP_TYPES)
 		goto error;
 
-
 	/*
 	 *	Parse the ICMP message
 	 */
@@ -1123,7 +1230,7 @@ int icmp_rcv(struct sk_buff *skb)
 	}
 
 	success = icmp_pointers[icmph->type].handler(skb);
-
+success_check:
 	if (success)  {
 		consume_skb(skb);
 		return NET_RX_SUCCESS;
@@ -1340,6 +1447,7 @@ static int __net_init icmp_sk_init(struct net *net)
 
 	/* Control parameters for ECHO replies. */
 	net->ipv4.sysctl_icmp_echo_ignore_all = 0;
+	net->ipv4.sysctl_icmp_echo_enable_probe = 0;
 	net->ipv4.sysctl_icmp_echo_ignore_broadcasts = 1;
 
 	/* Control parameter - ignore bogus broadcast responses? */
-- 
2.17.1

Powered by blists - more mailing lists