netdev - [PATCH net-next 7/7] net: lpc_eth: fix format warnings of block comments

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1617178714-14031-8-git-send-email-liweihang@huawei.com>
Date:   Wed, 31 Mar 2021 16:18:34 +0800
From:   Weihang Li <liweihang@...wei.com>
To:     <davem@...emloft.net>, <kuba@...nel.org>
CC:     <netdev@...r.kernel.org>, <linuxarm@...wei.com>,
        Yangyang Li <liyangyang20@...wei.com>,
        Weihang Li <liweihang@...wei.com>
Subject: [PATCH net-next 7/7] net: lpc_eth: fix format warnings of block comments

From: Yangyang Li <liyangyang20@...wei.com>

Fix the following format warning:
1. Block comments use * on subsequent lines
2. Block comments use a trailing */ on a separate line

Signed-off-by: Yangyang Li <liyangyang20@...wei.com>
Signed-off-by: Weihang Li <liweihang@...wei.com>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index d3cbb42..e72fd33 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1044,7 +1044,8 @@ static netdev_tx_t lpc_eth_hard_start_xmit(struct sk_buff *skb,
 
 	if (pldat->num_used_tx_buffs >= (ENET_TX_DESC - 1)) {
 		/* This function should never be called when there are no
-		   buffers */
+		 * buffers
+		 */
 		netif_stop_queue(ndev);
 		spin_unlock_irq(&pldat->lock);
 		WARN(1, "BUG! TX request when no free TX buffers!\n");
@@ -1318,7 +1319,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 		pldat->dma_buff_size = PAGE_ALIGN(pldat->dma_buff_size);
 
 		/* Allocate a chunk of memory for the DMA ethernet buffers
-		   and descriptors */
+		 * and descriptors
+		 */
 		pldat->dma_buff_base_v =
 			dma_alloc_coherent(dev,
 					   pldat->dma_buff_size, &dma_handle,
@@ -1365,7 +1367,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 	__lpc_mii_mngt_reset(pldat);
 
 	/* Force default PHY interface setup in chip, this will probably be
-	   changed by the PHY driver */
+	 * changed by the PHY driver
+	 */
 	pldat->link = 0;
 	pldat->speed = 100;
 	pldat->duplex = DUPLEX_FULL;
-- 
2.8.1