[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210407202254.29417-12-kabel@kernel.org>
Date: Wed, 7 Apr 2021 22:22:49 +0200
From: Marek Behún <kabel@...nel.org>
To: netdev@...r.kernel.org, Russell King <rmk+kernel@...linux.org.uk>,
Andrew Lunn <andrew@...n.ch>
Cc: "David S . Miller" <davem@...emloft.net>, kuba@...nel.org,
Marek Behún <kabel@...nel.org>
Subject: [PATCH net-next v4 11/16] net: phy: marvell10g: add separate structure for 88X3340
The 88X3340 contains 4 cores similar to 88X3310, but there is a
difference: it does not support xaui host mode. Instead the
corresponding MACTYPE means
rxaui / 5gbase-r / 2500base-x / sgmii without AN
Signed-off-by: Marek Behún <kabel@...nel.org>
---
drivers/net/phy/marvell10g.c | 58 ++++++++++++++++++++++++++++++++++--
include/linux/marvell_phy.h | 6 +++-
2 files changed, 61 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 2dc1317e601e..f74dfd993d8b 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -557,6 +557,21 @@ static int mv3310_init_interface(struct phy_device *phydev, int mactype)
return 0;
}
+static int mv3340_init_interface(struct phy_device *phydev, int mactype)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ int err = 0;
+
+ priv->rate_match = false;
+
+ if (mactype == MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN)
+ priv->const_interface = PHY_INTERFACE_MODE_RXAUI;
+ else
+ err = mv3310_init_interface(phydev, mactype);
+
+ return err;
+}
+
static int mv3310_config_init(struct phy_device *phydev)
{
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
@@ -884,6 +899,16 @@ static void mv3310_init_supported_interfaces(unsigned long *mask)
__set_bit(PHY_INTERFACE_MODE_USXGMII, mask);
}
+static void mv3340_init_supported_interfaces(unsigned long *mask)
+{
+ __set_bit(PHY_INTERFACE_MODE_SGMII, mask);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, mask);
+ __set_bit(PHY_INTERFACE_MODE_5GBASER, mask);
+ __set_bit(PHY_INTERFACE_MODE_RXAUI, mask);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, mask);
+ __set_bit(PHY_INTERFACE_MODE_USXGMII, mask);
+}
+
static void mv2110_init_supported_interfaces(unsigned long *mask)
{
__set_bit(PHY_INTERFACE_MODE_SGMII, mask);
@@ -903,6 +928,16 @@ static const struct mv3310_chip mv3310_type = {
#endif
};
+static const struct mv3310_chip mv3340_type = {
+ .init_supported_interfaces = mv3340_init_supported_interfaces,
+ .get_mactype = mv3310_get_mactype,
+ .init_interface = mv3340_init_interface,
+
+#ifdef CONFIG_HWMON
+ .hwmon_read_temp_reg = mv3310_hwmon_read_temp_reg,
+#endif
+};
+
static const struct mv3310_chip mv2110_type = {
.init_supported_interfaces = mv2110_init_supported_interfaces,
.get_mactype = mv2110_get_mactype,
@@ -916,7 +951,7 @@ static const struct mv3310_chip mv2110_type = {
static struct phy_driver mv3310_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88X3310,
- .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .phy_id_mask = MARVELL_PHY_ID_88X33X0_MASK,
.name = "mv88x3310",
.driver_data = &mv3310_type,
.get_features = mv3310_get_features,
@@ -932,6 +967,24 @@ static struct phy_driver mv3310_drivers[] = {
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
},
+ {
+ .phy_id = MARVELL_PHY_ID_88X3340,
+ .phy_id_mask = MARVELL_PHY_ID_88X33X0_MASK,
+ .name = "mv88x3340",
+ .driver_data = &mv3340_type,
+ .get_features = mv3310_get_features,
+ .config_init = mv3310_config_init,
+ .probe = mv3310_probe,
+ .suspend = mv3310_suspend,
+ .resume = mv3310_resume,
+ .config_aneg = mv3310_config_aneg,
+ .aneg_done = mv3310_aneg_done,
+ .read_status = mv3310_read_status,
+ .get_tunable = mv3310_get_tunable,
+ .set_tunable = mv3310_set_tunable,
+ .remove = mv3310_remove,
+ .set_loopback = genphy_c45_loopback,
+ },
{
.phy_id = MARVELL_PHY_ID_88E2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
@@ -954,7 +1007,8 @@ static struct phy_driver mv3310_drivers[] = {
module_phy_driver(mv3310_drivers);
static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
- { MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_88X33X0_MASK },
+ { MARVELL_PHY_ID_88X3340, MARVELL_PHY_ID_88X33X0_MASK },
{ MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK },
{ },
};
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 274abd5fbac3..6b11a5411082 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -22,10 +22,14 @@
#define MARVELL_PHY_ID_88E1545 0x01410ea0
#define MARVELL_PHY_ID_88E1548P 0x01410ec0
#define MARVELL_PHY_ID_88E3016 0x01410e60
-#define MARVELL_PHY_ID_88X3310 0x002b09a0
#define MARVELL_PHY_ID_88E2110 0x002b09b0
#define MARVELL_PHY_ID_88X2222 0x01410f10
+/* PHY IDs and mask for Alaska 10G PHYs */
+#define MARVELL_PHY_ID_88X33X0_MASK 0xfffffff8
+#define MARVELL_PHY_ID_88X3310 0x002b09a0
+#define MARVELL_PHY_ID_88X3340 0x002b09a8
+
/* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
#define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0
--
2.26.2
Powered by blists - more mailing lists