netdev - Re: [RFC net-next 1/1] seg6: add counters support for SRv6 Behaviors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210407132404.59c95127@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com>
Date:   Wed, 7 Apr 2021 13:24:04 -0700
From:   Jakub Kicinski <kuba@...nel.org>
To:     Andrea Mayer <andrea.mayer@...roma2.it>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
        David Ahern <dsahern@...nel.org>, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org,
        Stefano Salsano <stefano.salsano@...roma2.it>,
        Paolo Lungaroni <paolo.lungaroni@...roma2.it>,
        Ahmed Abdelsalam <ahabdels.dev@...il.com>
Subject: Re: [RFC net-next 1/1] seg6: add counters support for SRv6
 Behaviors

On Wed,  7 Apr 2021 20:03:32 +0200 Andrea Mayer wrote:
> This patch provides counters for SRv6 Behaviors as defined in [1], section
> 6. For each SRv6 Behavior instance, the counters defined in [1] are:
> 
>  - the total number of packets that have been correctly processed;
>  - the total amount of traffic in bytes of all packets that have been
>    correctly processed;
> 
> In addition, we introduces a new counter that counts the number of packets
> that have NOT been properly processed (i.e. errors) by an SRv6 Behavior
> instance.
> 
> Each SRv6 Behavior instance can be configured, at the time of its creation,
> to make use of counters.
> This is done through iproute2 which allows the user to create an SRv6
> Behavior instance specifying the optional "count" attribute as shown in the
> following example:
> 
>  $ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
> 
> per-behavior counters can be shown by adding "-s" to the iproute2 command
> line, i.e.:
> 
>  $ ip -s -6 route show 2001:db8::1
>  2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
> 
> [1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
> 
> Signed-off-by: Andrea Mayer <andrea.mayer@...roma2.it>

> +static int put_nla_counters(struct sk_buff *skb, struct seg6_local_lwt *slwt)
> +{
> +	struct seg6_local_counters counters = { 0, 0, 0 };
> +	struct nlattr *nla;
> +	int i;
> +
> +	nla = nla_reserve(skb, SEG6_LOCAL_COUNTERS, sizeof(counters));
> +	if (!nla)
> +		return -EMSGSIZE;

nla_reserve_64bit(), IIUC netlink guarantees alignment of 64 bit values.