[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210409131001.7r36v2vd3zmceloj@pengutronix.de>
Date: Fri, 9 Apr 2021 15:10:01 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Koen Vandeputte <koen.vandeputte@...ymesh.com>
Cc: linux-can@...r.kernel.org, wg@...ndegger.com,
netdev@...r.kernel.org, qiangqing.zhang@....com,
gregkh@...uxfoundation.org
Subject: Re: flexcan introduced a DIV/0 in kernel
On 09.04.2021 14:55:59, Koen Vandeputte wrote:
>
> On 09.04.21 13:21, Marc Kleine-Budde wrote:
> > On 4/9/21 12:18 PM, Koen Vandeputte wrote:
> > > Hi All,
> > >
> > > I just updated kernel 4.14 within OpenWRT from 4.14.224 to 4.14.229
> > > Booting it shows the splat below on each run. [1]
> > >
> > >
> > > It seems there are 2 patches regarding flexcan which were introduced in
> > > 4.14.226
> > >
> > > --> ce59ffca5c49 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
> > > --> bb7c9039a396 ("can: flexcan: assert FRZ bit in flexcan_chip_freeze()")
> > >
> > > Reverting these fixes the splat.
> > This patch should fix the problem:
> >
> > 47c5e474bc1e can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing
> > bitrate
> >
> > Greg, can you pick this up for v4.14?
> >
> > regards,
> > Marc
> >
> Checking kernels 4.4 & 4.9 shows that this fix is also missing over there.
>
> Marc,
> Can you confirm that it's also required for these?
ACK, the fix is needed for v4.4.265 and v4.9.265.
Thanks for checking this,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists