[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YHA7X5w8cLuelWll@kroah.com>
Date: Fri, 9 Apr 2021 13:32:47 +0200
From: Greg KH <gregkh@...uxfoundation.org>
To: Marc Kleine-Budde <mkl@...gutronix.de>
Cc: Koen Vandeputte <koen.vandeputte@...ymesh.com>,
linux-can@...r.kernel.org, wg@...ndegger.com,
netdev@...r.kernel.org, qiangqing.zhang@....com
Subject: Re: flexcan introduced a DIV/0 in kernel
On Fri, Apr 09, 2021 at 01:21:05PM +0200, Marc Kleine-Budde wrote:
> On 4/9/21 12:18 PM, Koen Vandeputte wrote:
> > Hi All,
> >
> > I just updated kernel 4.14 within OpenWRT from 4.14.224 to 4.14.229
> > Booting it shows the splat below on each run. [1]
> >
> >
> > It seems there are 2 patches regarding flexcan which were introduced in
> > 4.14.226
> >
> > --> ce59ffca5c49 ("can: flexcan: enable RX FIFO after FRZ/HALT valid")
> > --> bb7c9039a396 ("can: flexcan: assert FRZ bit in flexcan_chip_freeze()")
> >
> > Reverting these fixes the splat.
>
> This patch should fix the problem:
>
> 47c5e474bc1e can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing
> bitrate
>
> Greg, can you pick this up for v4.14?
Now queued up, thanks.
greg k-h
Powered by blists - more mailing lists