[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210412174956.GA4049952@robh.at.kernel.org>
Date: Mon, 12 Apr 2021 12:49:56 -0500
From: Rob Herring <robh@...nel.org>
To: Marc Kleine-Budde <mkl@...gutronix.de>
Cc: Aswath Govindraju <a-govindraju@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Grygorii Strashko <grygorii.strashko@...com>,
Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Wolfgang Grandegger <wg@...ndegger.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Vinod Koul <vkoul@...nel.org>,
Sriram Dash <sriram.dash@...sung.com>,
linux-can@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org
Subject: Re: [PATCH 1/4] dt-bindings: phy: Add binding for TI TCAN104x CAN
transceivers
On Mon, Apr 12, 2021 at 12:19:30PM +0200, Marc Kleine-Budde wrote:
> On 4/9/21 3:40 PM, Aswath Govindraju wrote:
> > Add binding documentation for TI TCAN104x CAN transceivers.
> >
> > Signed-off-by: Aswath Govindraju <a-govindraju@...com>
> > ---
> > .../bindings/phy/ti,tcan104x-can.yaml | 56 +++++++++++++++++++
> > 1 file changed, 56 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> > new file mode 100644
> > index 000000000000..4abfc30a97d0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> > @@ -0,0 +1,56 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: TCAN104x CAN TRANSCEIVER PHY
> > +
> > +maintainers:
> > + - Aswath Govindraju <a-govindraju@...com>
> > +
> > +properties:
> > + $nodename:
> > + pattern: "^tcan104x-phy"
> > +
> > + compatible:
> > + enum:
> > + - ti,tcan1042
> > + - ti,tcan1043
>
> Can you create a generic standby only and a generic standby and enable transceiver?
As a fallback compatible fine, but no generic binding please. A generic
binding can't describe any timing requirements between the 2 GPIO as
well as supplies when someone wants to add those (and they will).
>
> > +
> > + '#phy-cells':
> > + const: 0
> > +
> > + standby-gpios:
> > + description:
> > + gpio node to toggle standby signal on transceiver
> > + maxItems: 1
> > +
> > + enable-gpios:
> > + description:
> > + gpio node to toggle enable signal on transceiver
> > + maxItems: 1
> > +
> > + max-bitrate:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + description:
> > + max bit rate supported in bps
We already have 'max-speed' for serial devices, use that.
> > + minimum: 1
> > +
> > +required:
> > + - compatible
> > + - '#phy-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > +
> > + transceiver1: tcan104x-phy {
> > + compatible = "ti,tcan1043";
> > + #phy-cells = <0>;
> > + max-bitrate = <5000000>;
> > + standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
> > + enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_LOW>;
> > + };
> >
>
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Embedded Linux | https://www.pengutronix.de |
> Vertretung West/Dortmund | Phone: +49-231-2826-924 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
Powered by blists - more mailing lists