| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Apr 2021 18:06:39 +0200
From: Thierry Reding <thierry.reding@...il.com>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
Cc: Joakim Zhang <qiangqing.zhang@....com>,
Jon Hunter <jonathanh@...dia.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-tegra <linux-tegra@...r.kernel.org>
Subject: Re: Regression v5.12-rc3: net: stmmac: re-init rx buffers when mac
resume back
On Tue, Apr 13, 2021 at 12:13:01PM +0000, Joakim Zhang wrote:
>
> Hi Jon,
>
> > -----Original Message-----
> > From: Jon Hunter <jonathanh@...dia.com>
> > Sent: 2021年4月13日 16:41
> > To: Joakim Zhang <qiangqing.zhang@....com>; Giuseppe Cavallaro
> > <peppe.cavallaro@...com>; Alexandre Torgue <alexandre.torgue@...com>;
> > Jose Abreu <joabreu@...opsys.com>
> > Cc: netdev@...r.kernel.org; Linux Kernel Mailing List
> > <linux-kernel@...r.kernel.org>; linux-tegra <linux-tegra@...r.kernel.org>;
> > Jakub Kicinski <kuba@...nel.org>
> > Subject: Re: Regression v5.12-rc3: net: stmmac: re-init rx buffers when mac
> > resume back
> >
> >
> > On 01/04/2021 17:28, Jon Hunter wrote:
> > >
> > > On 31/03/2021 12:41, Joakim Zhang wrote:
> > >
> > > ...
> > >
> > >>> In answer to your question, resuming from suspend does work on this
> > >>> board without your change. We have been testing suspend/resume now
> > >>> on this board since Linux v5.8 and so we have the ability to bisect
> > >>> such regressions. So it is clear to me that this is the change that caused
> > this, but I am not sure why.
> > >>
> > >> Yes, I know this issue is regression caused by my patch. I just want to
> > analyze the potential reasons. Due to the code change only related to the page
> > recycle and reallocate.
> > >> So I guess if this page operate need IOMMU works when IOMMU is enabled.
> > Could you help check if IOMMU driver resume before STMMAC? Our common
> > desire is to find the root cause, right?
> > >
> > >
> > > Yes of course that is the desire here indeed. I had assumed that the
> > > suspend/resume order was good because we have never seen any problems,
> > > but nonetheless it is always good to check. Using ftrace I enabled
> > > tracing of the appropriate suspend/resume functions and this is what I
> > > see ...
> > >
> > > # tracer: function
> > > #
> > > # entries-in-buffer/entries-written: 4/4 #P:6
> > > #
> > > # _-----=> irqs-off
> > > # / _----=> need-resched
> > > # | / _---=> hardirq/softirq
> > > # || / _--=> preempt-depth
> > > # ||| / delay
> > > # TASK-PID CPU# |||| TIMESTAMP FUNCTION
> > > # | | | |||| | |
> > > rtcwake-748 [000] ...1 536.700777:
> > stmmac_pltfr_suspend <-platform_pm_suspend
> > > rtcwake-748 [000] ...1 536.735532:
> > arm_smmu_pm_suspend <-platform_pm_suspend
> > > rtcwake-748 [000] ...1 536.757290:
> > arm_smmu_pm_resume <-platform_pm_resume
> > > rtcwake-748 [003] ...1 536.856771:
> > stmmac_pltfr_resume <-platform_pm_resume
> > >
> > >
> > > So I don't see any ordering issues that could be causing this.
> >
> >
> > Another thing I have found is that for our platform, if the driver for the ethernet
> > PHY (in this case broadcom PHY) is enabled, then it fails to resume but if I
> > disable the PHY in the kernel configuration, then resume works. I have found
> > that if I move the reinit of the RX buffers to before the startup of the phy, then
> > it can resume OK with the PHY enabled.
> >
> > Does the following work for you? Does your platform use a specific ethernet
> > PHY driver?
>
> I am also looking into this issue these days, we use the Realtek RTL8211FDI PHY, driver is drivers/net/phy/realtek.c.
>
> For our EQOS MAC integrated in our SoC, Rx side logic depends on RXC clock from PHY, so we need phylink_start before MAC.
>
> I will test below code change tomorrow to see if it can work at my side, since it is only re-init memory, need not RXC clock.
>
>
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index 208cae344ffa..071d15d86dbe 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -5416,19 +5416,20 @@ int stmmac_resume(struct device *dev)
> > return ret;
> > }
> > + rtnl_lock();
> > + mutex_lock(&priv->lock);
> > + stmmac_reinit_rx_buffers(priv);
> > + mutex_unlock(&priv->lock);
> > +
> > if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
> > - rtnl_lock();
> > phylink_start(priv->phylink);
> > /* We may have called phylink_speed_down before */
> > phylink_speed_up(priv->phylink);
> > - rtnl_unlock();
> > }
> > - rtnl_lock();
> > mutex_lock(&priv->lock);
> > stmmac_reset_queues_param(priv);
> > - stmmac_reinit_rx_buffers(priv);
> > stmmac_free_tx_skbufs(priv);
> > stmmac_clear_descriptors(priv);
> >
> >
> > It is still not clear to us why the existing call to
> > stmmac_clear_descriptors() is not sufficient to fix your problem.
>
> During suspend/resume stress test, I found rx descriptor may not refill when system suspended, rx descriptor could be: 008 [0x00000000c4310080]: 0x0 0x40 0x0 0x34010040.
> When system resume back, stmmac_clear_descriptors() would change this rx descriptor to: 008 [0x00000000c4310080]: 0x0 0x40 0x0 0xb5010040, a broken rx descriptor.
> So at my side, stmmac_clear_descriptors() seems to be chief culprit. I have a idea if there is way to ensure all rx descriptors are refilled when suspend MAC.
>
> > How often does the issue you see occur?
> Suspend about 2000 times.
Hi David, Jakub,
given where we are in the release cycle, I think it'd be best to revert
commit 9c63faaa931e ("net: stmmac: re-init rx buffers when mac resume
back") for now.
To summarize the discussion: the patch was meant as a workaround to fix
an occasional suspend/resume failure on one board that was not fully
root caused, and ends up causing fully reproducible suspend/resume
failures on at least one other board.
Joakim is looking at an alternative solution and Jon and I can provide
testing from the Tegra side for any fixes.
Do you want me to send a revert patch or can you revert directly on top
of your tree?
Thanks,
Thierry
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists