[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMdYzYpyD1bTN+3Zaf4nGnN-O-c0u0koiCK45fLucL0T2+69+w@mail.gmail.com>
Date: Wed, 14 Apr 2021 07:03:25 -0400
From: Peter Geis <pgwipeout@...il.com>
To: Ezequiel Garcia <ezequiel@...labora.com>
Cc: Linux Kernel Network Developers <netdev@...r.kernel.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
Jose Abreu <joabreu@...opsys.com>,
Heiko Stuebner <heiko@...ech.de>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
David Wu <david.wu@...k-chips.com>, kernel@...labora.com
Subject: Re: [PATCH net-next 3/3] net: stmmac: Add RK3566/RK3568 SoC support
On Tue, Apr 13, 2021 at 7:37 PM Ezequiel Garcia <ezequiel@...labora.com> wrote:
>
> On Tuesday, April 13, 2021 19:51 -03, Peter Geis <pgwipeout@...il.com> wrote:
>
> > On Tue, Apr 13, 2021 at 5:03 PM Ezequiel Garcia <ezequiel@...labora.com> wrote:
> > >
> > > From: David Wu <david.wu@...k-chips.com>
> > >
> > > Add constants and callback functions for the dwmac present
> > > on RK3566 and RK3568 SoCs. As can be seen, the base structure
> > > is the same, only registers and the bits in them moved slightly.
> > >
> > > RK3568 supports two MACs, and RK3566 support just one.
> >
> > Tested this driver on the rk3566-quartz64.
> > It fails to fully probe the gmac with the following error:
> > [ 5.711127] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
> > [ 5.714147] rk_gmac-dwmac fe010000.ethernet: no regulator found
> > [ 5.714766] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
> > [ 5.715474] rk_gmac-dwmac fe010000.ethernet: TX delay(0x4f).
> > [ 5.716058] rk_gmac-dwmac fe010000.ethernet: RX delay(0x25).
> > [ 5.716694] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
> > [ 5.718413] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
> > [ 5.724140] rk_gmac-dwmac fe010000.ethernet: init for RGMII
> > [ 5.726802] rk_gmac-dwmac fe010000.ethernet: Version ID not available
> > [ 5.727525] rk_gmac-dwmac fe010000.ethernet: DWMAC1000
> > [ 5.728064] rk_gmac-dwmac fe010000.ethernet: DMA HW capability
> > register supported
> > [ 5.729026] rk_gmac-dwmac fe010000.ethernet: Normal descriptors
> > [ 5.729624] rk_gmac-dwmac fe010000.ethernet: Ring mode enabled
> > [ 5.731123] rk_gmac-dwmac fe010000.ethernet: Unbalanced pm_runtime_enable!
> > [ 5.873329] libphy: stmmac: probed
> > [ 5.905599] rk_gmac-dwmac fe010000.ethernet: Cannot register the MDIO bus
> > [ 5.906335] rk_gmac-dwmac fe010000.ethernet: stmmac_dvr_probe: MDIO
> > bus (id: 1) registration failed
> > [ 5.914338] rk_gmac-dwmac: probe of fe010000.ethernet failed with error -5
> >
> > This is due to the lack of setting has_gmac4 = true.
> >
>
> You are probably missing a "snps,dwmac-4.20a" in your compatible string, i.e.:
> compatible = "rockchip,rk3566-gmac", "snps,dwmac-4.20a";
Ah yes, I had disabled that because my variant took a different path.
Thanks!
>
> This seems to be common practice, judging from arch/arm/boot/dts/stm32***.
>
> Let me know how that goes!
> Ezequiel
>
> > >
> > > Signed-off-by: David Wu <david.wu@...k-chips.com>
> > > [Ezequiel: Add rockchip,rk3566-gmac compatible string]
> > > Signed-off-by: Ezequiel Garcia <ezequiel@...labora.com>
> > > ---
> > > .../bindings/net/rockchip-dwmac.txt | 2 +
> > > .../net/ethernet/stmicro/stmmac/dwmac-rk.c | 142 ++++++++++++++++++
> > > 2 files changed, 144 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
> > > index 3b71da7e8742..80203b16b652 100644
> > > --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
> > > +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
> > > @@ -12,6 +12,8 @@ Required properties:
> > > "rockchip,rk3366-gmac": found on RK3366 SoCs
> > > "rockchip,rk3368-gmac": found on RK3368 SoCs
> > > "rockchip,rk3399-gmac": found on RK3399 SoCs
> > > + "rockchip,rk3566-gmac": found on RK3566 SoCs
> > > + "rockchip,rk3568-gmac": found on RK3568 SoCs
> > > "rockchip,rv1108-gmac": found on RV1108 SoCs
> > > - reg: addresses and length of the register sets for the device.
> > > - interrupts: Should contain the GMAC interrupts.
> > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > > index d2637d83899e..096965b0fec9 100644
> > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > > @@ -948,6 +948,146 @@ static const struct rk_gmac_ops rk3399_ops = {
> > > .set_rmii_speed = rk3399_set_rmii_speed,
> > > };
> > >
> > > +#define RK3568_GRF_GMAC0_CON0 0x0380
> > > +#define RK3568_GRF_GMAC0_CON1 0x0384
> > > +#define RK3568_GRF_GMAC1_CON0 0x0388
> > > +#define RK3568_GRF_GMAC1_CON1 0x038c
> > > +
> > > +/* RK3568_GRF_GMAC0_CON1 && RK3568_GRF_GMAC1_CON1 */
> > > +#define RK3568_GMAC_PHY_INTF_SEL_RGMII \
> > > + (GRF_BIT(4) | GRF_CLR_BIT(5) | GRF_CLR_BIT(6))
> > > +#define RK3568_GMAC_PHY_INTF_SEL_RMII \
> > > + (GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | GRF_BIT(6))
> > > +#define RK3568_GMAC_FLOW_CTRL GRF_BIT(3)
> > > +#define RK3568_GMAC_FLOW_CTRL_CLR GRF_CLR_BIT(3)
> > > +#define RK3568_GMAC_RXCLK_DLY_ENABLE GRF_BIT(1)
> > > +#define RK3568_GMAC_RXCLK_DLY_DISABLE GRF_CLR_BIT(1)
> > > +#define RK3568_GMAC_TXCLK_DLY_ENABLE GRF_BIT(0)
> > > +#define RK3568_GMAC_TXCLK_DLY_DISABLE GRF_CLR_BIT(0)
> > > +
> > > +/* RK3568_GRF_GMAC0_CON0 && RK3568_GRF_GMAC1_CON0 */
> > > +#define RK3568_GMAC_CLK_RX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 8)
> > > +#define RK3568_GMAC_CLK_TX_DL_CFG(val) HIWORD_UPDATE(val, 0x7F, 0)
> > > +
> > > +static void rk3566_set_to_rgmii(struct rk_priv_data *bsp_priv,
> > > + int tx_delay, int rx_delay)
> > > +{
> > > + struct device *dev = &bsp_priv->pdev->dev;
> > > +
> > > + if (IS_ERR(bsp_priv->grf)) {
> > > + dev_err(dev, "Missing rockchip,grf property\n");
> > > + return;
> > > + }
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON1,
> > > + RK3568_GMAC_PHY_INTF_SEL_RGMII |
> > > + RK3568_GMAC_RXCLK_DLY_ENABLE |
> > > + RK3568_GMAC_TXCLK_DLY_ENABLE);
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON0,
> > > + RK3568_GMAC_CLK_RX_DL_CFG(rx_delay) |
> > > + RK3568_GMAC_CLK_TX_DL_CFG(tx_delay));
> > > +}
> > > +
> > > +static void rk3566_set_to_rmii(struct rk_priv_data *bsp_priv)
> > > +{
> > > + struct device *dev = &bsp_priv->pdev->dev;
> > > +
> > > + if (IS_ERR(bsp_priv->grf)) {
> > > + dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
> > > + return;
> > > + }
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON1,
> > > + RK3568_GMAC_PHY_INTF_SEL_RMII);
> > > +}
> > > +
> > > +static void rk3568_set_to_rgmii(struct rk_priv_data *bsp_priv,
> > > + int tx_delay, int rx_delay)
> > > +{
> > > + struct device *dev = &bsp_priv->pdev->dev;
> > > +
> > > + if (IS_ERR(bsp_priv->grf)) {
> > > + dev_err(dev, "Missing rockchip,grf property\n");
> > > + return;
> > > + }
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC0_CON1,
> > > + RK3568_GMAC_PHY_INTF_SEL_RGMII |
> > > + RK3568_GMAC_RXCLK_DLY_ENABLE |
> > > + RK3568_GMAC_TXCLK_DLY_ENABLE);
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC0_CON0,
> > > + RK3568_GMAC_CLK_RX_DL_CFG(rx_delay) |
> > > + RK3568_GMAC_CLK_TX_DL_CFG(tx_delay));
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON1,
> > > + RK3568_GMAC_PHY_INTF_SEL_RGMII |
> > > + RK3568_GMAC_RXCLK_DLY_ENABLE |
> > > + RK3568_GMAC_TXCLK_DLY_ENABLE);
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON0,
> > > + RK3568_GMAC_CLK_RX_DL_CFG(rx_delay) |
> > > + RK3568_GMAC_CLK_TX_DL_CFG(tx_delay));
> >
> > Since there are two GMACs on the rk3568, and either, or, or both may
> > be enabled in various configurations, we should only configure the
> > controller we are currently operating.
Perhaps we should have match data (such as reg = <0>, or against the
address) to identify the individual controllers.
> >
> > > +}
> > > +
> > > +static void rk3568_set_to_rmii(struct rk_priv_data *bsp_priv)
> > > +{
> > > + struct device *dev = &bsp_priv->pdev->dev;
> > > +
> > > + if (IS_ERR(bsp_priv->grf)) {
> > > + dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
> > > + return;
> > > + }
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC0_CON1,
> > > + RK3568_GMAC_PHY_INTF_SEL_RMII);
> > > +
> > > + regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON1,
> > > + RK3568_GMAC_PHY_INTF_SEL_RMII);
> >
> > Same as above.
> >
> > > +}
> > > +
> > > +static void rk3568_set_gmac_speed(struct rk_priv_data *bsp_priv, int speed)
> > > +{
> > > + struct device *dev = &bsp_priv->pdev->dev;
> > > + unsigned long rate;
> > > + int ret;
> > > +
> > > + switch (speed) {
> > > + case 10:
> > > + rate = 2500000;
> > > + break;
> > > + case 100:
> > > + rate = 25000000;
> > > + break;
> > > + case 1000:
> > > + rate = 125000000;
> > > + break;
> > > + default:
> > > + dev_err(dev, "unknown speed value for GMAC speed=%d", speed);
> > > + return;
> > > + }
> > > +
> > > + ret = clk_set_rate(bsp_priv->clk_mac_speed, rate);
> > > + if (ret)
> > > + dev_err(dev, "%s: set clk_mac_speed rate %ld failed %d\n",
> > > + __func__, rate, ret);
> > > +}
> > > +
> > > +static const struct rk_gmac_ops rk3568_ops = {
> > > + .set_to_rgmii = rk3568_set_to_rgmii,
> > > + .set_to_rmii = rk3568_set_to_rmii,
> > > + .set_rgmii_speed = rk3568_set_gmac_speed,
> > > + .set_rmii_speed = rk3568_set_gmac_speed,
> > > +};
> > > +
> > > +static const struct rk_gmac_ops rk3566_ops = {
> > > + .set_to_rgmii = rk3566_set_to_rgmii,
> > > + .set_to_rmii = rk3566_set_to_rmii,
> > > + .set_rgmii_speed = rk3568_set_gmac_speed,
> > > + .set_rmii_speed = rk3568_set_gmac_speed,
> > > +};
> > > +
> > > #define RV1108_GRF_GMAC_CON0 0X0900
> > >
> > > /* RV1108_GRF_GMAC_CON0 */
> > > @@ -1512,6 +1652,8 @@ static const struct of_device_id rk_gmac_dwmac_match[] = {
> > > { .compatible = "rockchip,rk3366-gmac", .data = &rk3366_ops },
> > > { .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
> > > { .compatible = "rockchip,rk3399-gmac", .data = &rk3399_ops },
> > > + { .compatible = "rockchip,rk3568-gmac", .data = &rk3568_ops },
> > > + { .compatible = "rockchip,rk3566-gmac", .data = &rk3566_ops },
> > > { .compatible = "rockchip,rv1108-gmac", .data = &rv1108_ops },
> > > { }
> > > };
> > > --
> > > 2.30.0
> > >
>
Powered by blists - more mailing lists