lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <16102d157576bfa7be341ed7508e70d930e40bab.camel@collabora.com>
Date:   Wed, 14 Apr 2021 10:48:19 -0300
From:   Ezequiel Garcia <ezequiel@...labora.com>
To:     Heiko Stübner <heiko@...ech.de>,
        Peter Geis <pgwipeout@...il.com>
Cc:     Linux Kernel Network Developers <netdev@...r.kernel.org>,
        "open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        David Wu <david.wu@...k-chips.com>, kernel@...labora.com
Subject: Re: [PATCH net-next 3/3] net: stmmac: Add RK3566/RK3568 SoC support

Hi Peter, Heiko,

On Wed, 2021-04-14 at 13:15 +0200, Heiko Stübner wrote:
> Am Mittwoch, 14. April 2021, 13:03:25 CEST schrieb Peter Geis:
> > On Tue, Apr 13, 2021 at 7:37 PM Ezequiel Garcia <ezequiel@...labora.com> wrote:
> > > > > +static void rk3566_set_to_rmii(struct rk_priv_data *bsp_priv)
> > > > > +{
> > > > > +       struct device *dev = &bsp_priv->pdev->dev;
> > > > > +
> > > > > +       if (IS_ERR(bsp_priv->grf)) {
> > > > > +               dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
> > > > > +               return;
> > > > > +       }
> > > > > +
> > > > > +       regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON1,
> > > > > +                    RK3568_GMAC_PHY_INTF_SEL_RMII);
> > > > > +}
> > > > > +
> > > > > +static void rk3568_set_to_rgmii(struct rk_priv_data *bsp_priv,
> > > > > +                               int tx_delay, int rx_delay)
> > > > > +{
> > > > > +       struct device *dev = &bsp_priv->pdev->dev;
> > > > > +
> > > > > +       if (IS_ERR(bsp_priv->grf)) {
> > > > > +               dev_err(dev, "Missing rockchip,grf property\n");
> > > > > +               return;
> > > > > +       }
> > > > > +
> > > > > +       regmap_write(bsp_priv->grf, RK3568_GRF_GMAC0_CON1,
> > > > > +                    RK3568_GMAC_PHY_INTF_SEL_RGMII |
> > > > > +                    RK3568_GMAC_RXCLK_DLY_ENABLE |
> > > > > +                    RK3568_GMAC_TXCLK_DLY_ENABLE);
> > > > > +
> > > > > +       regmap_write(bsp_priv->grf, RK3568_GRF_GMAC0_CON0,
> > > > > +                    RK3568_GMAC_CLK_RX_DL_CFG(rx_delay) |
> > > > > +                    RK3568_GMAC_CLK_TX_DL_CFG(tx_delay));
> > > > > +
> > > > > +       regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON1,
> > > > > +                    RK3568_GMAC_PHY_INTF_SEL_RGMII |
> > > > > +                    RK3568_GMAC_RXCLK_DLY_ENABLE |
> > > > > +                    RK3568_GMAC_TXCLK_DLY_ENABLE);
> > > > > +
> > > > > +       regmap_write(bsp_priv->grf, RK3568_GRF_GMAC1_CON0,
> > > > > +                    RK3568_GMAC_CLK_RX_DL_CFG(rx_delay) |
> > > > > +                    RK3568_GMAC_CLK_TX_DL_CFG(tx_delay));
> > > > 
> > > > Since there are two GMACs on the rk3568, and either, or, or both may
> > > > be enabled in various configurations, we should only configure the
> > > > controller we are currently operating.
> > 
> > Perhaps we should have match data (such as reg = <0>, or against the
> > address) to identify the individual controllers.
> 
> Hmm, "reg" will be used by the actual mmio address of the controller,
> so matching against that should be the way I guess.
> 
> We're already doing something similar for dsi:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c#n1170
> 

I have to admit, I'm not a fan of hardcoding the registers in the kernel.

David Wu solved this in the downstream kernel by using bus_id,
which parses the devicetree "ethernet@0" node, i.e.:

  plat->bus_id = of_alias_get_id(np, "ethernet");

I'm inclined for this solution. Maybe Jose can suggest how to approach it?

Thanks!
Ezequiel


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ