netdev - Re: [RFC net-next] net: stmmac: should not modify RX descriptor when STMMAC resume

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 22 Apr 2021 11:20:57 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Jon Hunter <jonathanh@...dia.com>,
        Joakim Zhang <qiangqing.zhang@....com>,
        "peppe.cavallaro@...com" <peppe.cavallaro@...com>,
        "alexandre.torgue@...s.st.com" <alexandre.torgue@...s.st.com>,
        "joabreu@...opsys.com" <joabreu@...opsys.com>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "kuba@...nel.org" <kuba@...nel.org>,
        "mcoquelin.stm32@...il.com" <mcoquelin.stm32@...il.com>,
        "andrew@...n.ch" <andrew@...n.ch>
Cc:     dl-linux-imx <linux-imx@....com>,
        "treding@...dia.com" <treding@...dia.com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [RFC net-next] net: stmmac: should not modify RX descriptor when
 STMMAC resume



On 4/22/2021 11:18 AM, Jon Hunter wrote:
> 
> On 22/04/2021 18:32, Florian Fainelli wrote:
>>
>>
>> On 4/22/2021 10:00 AM, Jon Hunter wrote:
>>>
>>> On 22/04/2021 17:12, Florian Fainelli wrote:
>>>
>>> ...
>>>
>>>> What does the resumption failure looks like? Does the stmmac driver
>>>> successfully resume from your suspend state, but there is no network
>>>> traffic? Do you have a log by any chance?
>>>
>>> The board fails to resume and appears to hang. With regard to the
>>> original patch I did find that moving the code to re-init the RX buffers
>>> to before the PHY is enabled did work [0].
>>
>> You indicated that you are using a Broadcom PHY, which specific PHY are
>> you using?
>>
>> I suspect that the stmmac is somehow relying on the PHY to provide its
>> 125MHz RXC clock back to you in order to have its RX logic work correctly.
>>
>> One difference between using the Broadcom PHY and the Generic PHY
>> drivers could be whether your Broadcom PHY driver entry has a
>> .suspend/.resume callback implemented or not.
> 
> 
> This board has a BCM89610 and uses the drivers/net/phy/broadcom.c
> driver. Interestingly I don't see any suspend/resume handlers for this phy.

Now if you do add .suspend = genphy_suspend and .resume = bcm54xx_resume
for this PHY entry does it work better?
-- 
Florian