netdev - [PATCH 00/14] Multiple improvement to qca8k stability

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 23 Apr 2021 03:47:26 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     Ansuel Smith <ansuelsmth@...il.com>, Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 00/14] Multiple improvement to qca8k stability

Currently qca8337 switch are widely used on ipq8064 based router.
On these particular router it was notice a very unstable switch with
port not link detected as link with unknown speed, port dropping
randomly and general unreliability. Lots of testing and comparison
between this dsa driver and the original qsdk driver showed lack of some
additional delay and values. A main difference arised from the original
driver and the dsa one. The original driver didn't use MASTER regs to
read phy status and the dedicated mdio driver worked correctly. Now that
the dsa driver actually use these regs, it was found that these special
read/write operation required mutual exclusion to normal
qca8k_read/write operation. The add of mutex for these operation fixed
the random port dropping and now only the actual linked port randomly
dropped. Adding additional delay for set_page operation and fixing a bug
in the mdio dedicated driver fixed also this problem. The current driver
requires also more time to apply vlan switch. All of these changes and
tweak permit a now very stable and reliable dsa driver and 0 port
dropping. This series is currently tested by at least 5 user with
different routers and all reports positive results and no problems.

Ansuel Smith (14):
  drivers: net: dsa: qca8k: handle error with set_page
  drivers: net: dsa: qca8k: tweak internal delay to oem spec
  drivers: net: mdio: mdio-ip8064: improve busy wait delay
  drivers: net: dsa: qca8k: apply suggested packet priority
  drivers: net: dsa: qca8k: add support for qca8327 switch
  devicetree: net: dsa: qca8k: Document new compatible qca8327
  drivers: net: dsa: qca8k: limit priority tweak to qca8337 switch
  drivers: net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327
  drivers: net: dsa: qca8k: add support for switch rev
  drivers: net: dsa: qca8k: add support for specific QCA access function
  drivers: net: dsa: qca8k: apply switch revision fix
  drivers: net: dsa: qca8k: clear MASTER_EN after phy read/write
  drivers: net: dsa: qca8k: protect MASTER busy_wait with mdio mutex
  drivers: net: dsa: qca8k: enlarge mdio delay and timeout

 .../devicetree/bindings/net/dsa/qca8k.txt     |   1 +
 drivers/net/dsa/qca8k.c                       | 256 ++++++++++++++++--
 drivers/net/dsa/qca8k.h                       |  54 +++-
 drivers/net/mdio/mdio-ipq8064.c               |  36 ++-
 4 files changed, 304 insertions(+), 43 deletions(-)

-- 
2.30.2