netdev - [PATCH net-next v2 01/10] bnxt_en: report signal mode in link up messages

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1619372727-19187-2-git-send-email-michael.chan@broadcom.com>
Date:   Sun, 25 Apr 2021 13:45:18 -0400
From:   Michael Chan <michael.chan@...adcom.com>
To:     davem@...emloft.net
Cc:     netdev@...r.kernel.org, kuba@...nel.org, gospo@...adcom.com
Subject: [PATCH net-next v2 01/10] bnxt_en: report signal mode in link up messages

From: Edwin Peer <edwin.peer@...adcom.com>

Firmware reports link signalling mode for certain speeds. In these
cases, print the signalling modes in kernel log link up messages.

Reviewed-by: Andy Gospodarek <gospo@...adcom.com>
Signed-off-by: Edwin Peer <edwin.peer@...adcom.com>
Signed-off-by: Michael Chan <michael.chan@...adcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index e15d454e33f0..573c039e6046 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9075,8 +9075,9 @@ static char *bnxt_report_fec(struct bnxt_link_info *link_info)
 static void bnxt_report_link(struct bnxt *bp)
 {
 	if (bp->link_info.link_up) {
-		const char *duplex;
+		const char *signal = "";
 		const char *flow_ctrl;
+		const char *duplex;
 		u32 speed;
 		u16 fec;
 
@@ -9098,8 +9099,23 @@ static void bnxt_report_link(struct bnxt *bp)
 			flow_ctrl = "ON - receive";
 		else
 			flow_ctrl = "none";
-		netdev_info(bp->dev, "NIC Link is Up, %u Mbps %s duplex, Flow control: %s\n",
-			    speed, duplex, flow_ctrl);
+		if (bp->link_info.phy_qcfg_resp.option_flags &
+		    PORT_PHY_QCFG_RESP_OPTION_FLAGS_SIGNAL_MODE_KNOWN) {
+			u8 sig_mode = bp->link_info.active_fec_sig_mode &
+				      PORT_PHY_QCFG_RESP_SIGNAL_MODE_MASK;
+			switch (sig_mode) {
+			case PORT_PHY_QCFG_RESP_SIGNAL_MODE_NRZ:
+				signal = "(NRZ) ";
+				break;
+			case PORT_PHY_QCFG_RESP_SIGNAL_MODE_PAM4:
+				signal = "(PAM4) ";
+				break;
+			default:
+				break;
+			}
+		}
+		netdev_info(bp->dev, "NIC Link is Up, %u Mbps %s%s duplex, Flow control: %s\n",
+			    speed, signal, duplex, flow_ctrl);
 		if (bp->flags & BNXT_FLAG_EEE_CAP)
 			netdev_info(bp->dev, "EEE is %s\n",
 				    bp->eee.eee_active ? "active" :
-- 
2.18.1


Download attachment "smime.p7s" of type "application/pkcs7-signature" (4209 bytes)