netdev - [RFC PATCH net-next v4 26/28] net: dsa: permit driver to provide custom phy_mii

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat,  8 May 2021 02:29:16 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     Ansuel Smith <ansuelsmth@...il.com>, Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [RFC PATCH net-next v4 26/28] net: dsa: permit driver to provide custom phy_mii_mask for slave mdiobus

Some switch doesn't have a 1:1 map phy to port. Permit driver to provide
a custom phy_mii_mask so the internal mdiobus can correctly use the
provided phy reg as it can differ from the port reg.
The qca8k driver is provided as a first user of this function.

Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
 drivers/net/dsa/qca8k.c | 30 ++++++++++++++++++++++++++++++
 include/net/dsa.h       |  7 +++++++
 net/dsa/dsa2.c          |  7 ++++++-
 3 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 3d195fdd7ed5..3c3e05735b2d 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1685,7 +1685,37 @@ qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
 	return DSA_TAG_PROTO_QCA;
 }
 
+static u32
+qca8k_get_phys_mii_mask(struct dsa_switch *ds)
+{
+	struct device_node *mdio, *phy;
+	u32 reg, phy_mii_mask = 0;
+	int err;
+
+	mdio = of_get_child_by_name(ds->dev->of_node, "mdio");
+	if (mdio) {
+		for_each_available_child_of_node(mdio, phy) {
+			err = of_property_read_u32(phy, "reg", &reg);
+			if (err) {
+				of_node_put(phy);
+				of_node_put(mdio);
+				return 0;
+			}
+
+			phy_mii_mask |= BIT(reg);
+		}
+
+		of_node_put(mdio);
+		return phy_mii_mask;
+	}
+
+	/* Fallback to the lagacy mapping if mdio node is not found */
+	dev_warn(ds->dev, "Using the legacy phys_mii_mapping. Consider updating the dts.");
+	return dsa_user_ports(ds);
+}
+
 static const struct dsa_switch_ops qca8k_switch_ops = {
+	.get_phys_mii_mask	= qca8k_get_phys_mii_mask,
 	.get_tag_protocol	= qca8k_get_tag_protocol,
 	.setup			= qca8k_setup,
 	.get_strings		= qca8k_get_strings,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 83a933e563fe..4003ffc659a4 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -511,6 +511,13 @@ struct dsa_switch_ops {
 	void	(*teardown)(struct dsa_switch *ds);
 	u32	(*get_phy_flags)(struct dsa_switch *ds, int port);
 
+	/*
+	 * Provide a custom phys_mii_mask for the dsa slave mdiobus instead
+	 * of relying on the dsa_user_ports. Not every switch has a 1:1 map
+	 * port to PHY, hence the driver can provide their fixed mask.
+	 */
+	u32	(*get_phys_mii_mask)(struct dsa_switch *ds);
+
 	/*
 	 * Access to the switch's PHY registers.
 	 */
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 79adabe3e2a7..7eabd4d67849 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -682,8 +682,13 @@ static int dsa_switch_setup(struct dsa_switch *ds)
 	 * driver and before ops->setup() has run, since the switch drivers and
 	 * the slave MDIO bus driver rely on these values for probing PHY
 	 * devices or not
+	 * Driver can provide his on mask as some switch doesn't have a 1:1 map
+	 * phy to port.
 	 */
-	ds->phys_mii_mask |= dsa_user_ports(ds);
+	if (ds->ops->get_phys_mii_mask)
+		ds->phys_mii_mask = ds->ops->get_phys_mii_mask(ds);
+	else
+		ds->phys_mii_mask |= dsa_user_ports(ds);
 
 	/* Add the switch to devlink before calling setup, so that setup can
 	 * add dpipe tables
-- 
2.30.2