netdev - Re: [PATCH v2] net: phy: add driver for Motorcomm yt8511 phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YJsl7rLVI6ShqZvI@lunn.ch>
Date:   Wed, 12 May 2021 02:48:46 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Peter Geis <pgwipeout@...il.com>
Cc:     Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH v2] net: phy: add driver for Motorcomm yt8511 phy

On Tue, May 11, 2021 at 06:59:13PM -0400, Peter Geis wrote:
> Add a driver for the Motorcomm yt8511 phy that will be used in the
> production Pine64 rk3566-quartz64 development board.
> It supports gigabit transfer speeds, rgmii, and 125mhz clk output.

Hi Peter

Please can you add minimal RGMII delay support. Trying to add it later
generally end up in backwards compatibility problems.

Do you know which one of the four RGMII modes your setup needs? Is the
PHY adding the Rx and Tx delays? So "rgmii-id"?

       Andrew