| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210514020442.946-2-code@reto-schneider.ch>
Date: Fri, 14 May 2021 04:04:36 +0200
From: Reto Schneider <code@...o-schneider.ch>
To: Jes.Sorensen@...il.com, linux-wireless@...r.kernel.org,
pkshih@...ltek.com
Cc: yhchuang@...ltek.com, Larry.Finger@...inger.net,
tehuang@...ltek.com, reto.schneider@...qvarnagroup.com,
ccchiu77@...il.com, kvalo@...eaurora.org, davem@...emloft.net,
kuba@...nel.org, Chris Chiu <chiu@...lessos.org>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH 1/7] rtl8xxxu: add code to handle BSS_CHANGED_TXPOWER/IEEE80211_CONF_CHANGE_POWER
From: Chris Chiu <chiu@...lessos.org>
The 'iw set txpower' is not handled by the driver. Use the existing
set_tx_power function to apply the tx power change
Signed-off-by: Chris Chiu <chiu@...lessos.org>
(cherry picked from commit 48f8fbccb7dff2d3c5f72a4267313d3c4cfc7df9)
Signed-off-by: Reto Schneider <reto.schneider@...qvarnagroup.com>
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 3 +
.../realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 +
.../realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 +
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 90 +++++++++++++++++++
4 files changed, 95 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index d6d1be4169e5..c15e4a52b9e5 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1426,6 +1426,7 @@ struct rtl8xxxu_fileops {
void (*enable_rf) (struct rtl8xxxu_priv *priv);
void (*disable_rf) (struct rtl8xxxu_priv *priv);
void (*usb_quirks) (struct rtl8xxxu_priv *priv);
+ u8 (*dbm_to_txpwridx)(struct rtl8xxxu_priv *priv, u16 mode, int dbm);
void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel,
bool ht40);
void (*update_rate_mask) (struct rtl8xxxu_priv *priv,
@@ -1508,6 +1509,8 @@ void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv);
int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv);
void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv);
void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv);
+u8 rtl8xxxu_gen1_dbm_to_txpwridx(struct rtl8xxxu_priv *priv,
+ u16 mode, int dbm);
void rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv,
int channel, bool ht40);
void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw);
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
index 27c4cb688be4..bb6df8cac82f 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
@@ -556,6 +556,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops = {
.enable_rf = rtl8xxxu_gen1_enable_rf,
.disable_rf = rtl8xxxu_gen1_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
+ .dbm_to_txpwridx = rtl8xxxu_gen1_dbm_to_txpwridx,
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
.update_rate_mask = rtl8xxxu_update_rate_mask,
.report_connect = rtl8xxxu_gen1_report_connect,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
index 4f93f88716a9..a5d56f61c4eb 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c
@@ -373,6 +373,7 @@ struct rtl8xxxu_fileops rtl8723au_fops = {
.enable_rf = rtl8xxxu_gen1_enable_rf,
.disable_rf = rtl8xxxu_gen1_disable_rf,
.usb_quirks = rtl8xxxu_gen1_usb_quirks,
+ .dbm_to_txpwridx = rtl8xxxu_gen1_dbm_to_txpwridx,
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
.update_rate_mask = rtl8xxxu_update_rate_mask,
.report_connect = rtl8xxxu_gen1_report_connect,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 5cd7ef3625c5..e8459cb6035f 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -1382,6 +1382,38 @@ void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw)
}
}
+#define MAX_TXPWR_IDX_NMODE_92S 63
+
+u8
+rtl8xxxu_gen1_dbm_to_txpwridx(struct rtl8xxxu_priv *priv, u16 mode, int dbm)
+{
+ u8 txpwridx;
+ long offset;
+
+ switch (mode) {
+ case WIRELESS_MODE_B:
+ offset = -7;
+ break;
+ case WIRELESS_MODE_G:
+ case WIRELESS_MODE_N_24G:
+ offset = -8;
+ break;
+ default:
+ offset = -8;
+ break;
+ }
+
+ if ((dbm - offset) > 0)
+ txpwridx = (u8)((dbm - offset) * 2);
+ else
+ txpwridx = 0;
+
+ if (txpwridx > MAX_TXPWR_IDX_NMODE_92S)
+ txpwridx = MAX_TXPWR_IDX_NMODE_92S;
+
+ return txpwridx;
+}
+
void
rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
{
@@ -4508,6 +4540,55 @@ rtl8xxxu_wireless_mode(struct ieee80211_hw *hw, struct ieee80211_sta *sta)
return network_type;
}
+static void rtl8xxxu_update_txpower(struct rtl8xxxu_priv *priv, int power)
+{
+ bool ht40 = false;
+ struct ieee80211_hw *hw = priv->hw;
+ int channel = hw->conf.chandef.chan->hw_value;
+ u8 cck_txpwridx, ofdm_txpwridx;
+ int i, group;
+
+ if (!priv->fops->dbm_to_txpwridx)
+ return;
+
+ switch (hw->conf.chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ case NL80211_CHAN_WIDTH_20:
+ ht40 = false;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ ht40 = true;
+ break;
+ default:
+ return;
+ }
+
+ // change the power level to power index
+ cck_txpwridx = priv->fops->dbm_to_txpwridx(priv, WIRELESS_MODE_B,
+ power);
+ ofdm_txpwridx = priv->fops->dbm_to_txpwridx(priv, WIRELESS_MODE_N_24G,
+ power);
+
+ if (ofdm_txpwridx - priv->ofdm_tx_power_index_diff[1].a > 0)
+ ofdm_txpwridx -= priv->ofdm_tx_power_index_diff[1].a;
+ else
+ ofdm_txpwridx = 0;
+
+ group = rtl8xxxu_gen1_channel_to_group(channel);
+
+ if (cck_txpwridx <= priv->cck_tx_power_index_A[group]) {
+ priv->cck_tx_power_index_A[group] = cck_txpwridx;
+ priv->cck_tx_power_index_B[group] = cck_txpwridx;
+ }
+
+ if (ofdm_txpwridx <= priv->ht40_1s_tx_power_index_A[group]) {
+ priv->ht40_1s_tx_power_index_A[i] = ofdm_txpwridx;
+ priv->ht40_1s_tx_power_index_B[i] = ofdm_txpwridx;
+ }
+
+ priv->fops->set_tx_power(priv, channel, ht40);
+}
+
static void
rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf, u32 changed)
@@ -4604,6 +4685,12 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
dev_dbg(dev, "Changed BASIC_RATES!\n");
rtl8xxxu_set_basic_rates(priv, bss_conf->basic_rates);
}
+
+ if (changed & BSS_CHANGED_TXPOWER) {
+ dev_dbg(dev, "Changed TX power!\n");
+ //rtl8xxxu_update_txpower(priv, bss_conf->txpower); // iterate
+ rtl8xxxu_update_txpower(priv, hw->conf.power_level);
+ }
error:
return;
}
@@ -5891,6 +5978,9 @@ static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed)
priv->fops->config_channel(hw);
}
+ if (changed & IEEE80211_CONF_CHANGE_POWER)
+ rtl8xxxu_update_txpower(priv, hw->conf.power_level);
+
exit:
return ret;
}
--
2.29.2
Powered by blists - more mailing lists