[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210514020442.946-7-code@reto-schneider.ch>
Date: Fri, 14 May 2021 04:04:41 +0200
From: Reto Schneider <code@...o-schneider.ch>
To: Jes.Sorensen@...il.com, linux-wireless@...r.kernel.org,
pkshih@...ltek.com
Cc: yhchuang@...ltek.com, Larry.Finger@...inger.net,
tehuang@...ltek.com, reto.schneider@...qvarnagroup.com,
ccchiu77@...il.com, kvalo@...eaurora.org, davem@...emloft.net,
kuba@...nel.org, Chris Chiu <chiu@...lessos.org>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH 6/7] rtl8xxxu: Fix the reported rx signal strength
From: Chris Chiu <chiu@...lessos.org>
In rtl8xxxx_rx_query_desc for each chip in rtlwifi family, the
rx_status->signal is always the status->recvsignalpower + 10.
We also observe the same thing in air capture that the RSSI is
always ~10dBm higher than reported from driver.
Add this 10dBm to avoid confusion.
(cherry picked from commit e1a4f83da577474dfa23e85483a83eb7fb707edc)
Signed-off-by: Reto Schneider <reto.schneider@...qvarnagroup.com>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 0c997c360028..088e007e8bd0 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5319,6 +5319,11 @@ static void rtl8xxxu_rx_parse_phystats(struct rtl8xxxu_priv *priv,
rx_status->signal =
(phy_stats->cck_sig_qual_ofdm_pwdb_all >> 1) - 110;
}
+
+ // refers to rtlxxxx_rx_query_desc of rtlwifi/rtlxxxx/trx.c
+ // needs to verify on RTL8723BU
+ if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E)
+ rx_status->signal += 10;
}
static void rtl8xxxu_free_rx_resources(struct rtl8xxxu_priv *priv)
--
2.29.2
Powered by blists - more mailing lists