Message-ID: <YKOGayhGghjfgNXZ@mail-itl>
Date:   Tue, 18 May 2021 11:18:35 +0200
From:   Marek Marczykowski-Górecki 
        <marmarek@...isiblethingslab.com>
To:     paul@....org
Cc:     "Durrant, Paul" <pdurrant@...zon.co.uk>,
        Michael Brown <mbrown@...systems.co.uk>,
        "xen-devel@...ts.xenproject.org" <xen-devel@...ts.xenproject.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "wei.liu@...nel.org" <wei.liu@...nel.org>,
        Ian Jackson <iwj@...project.org>, Wei Liu <wl@....org>,
        Anthony PERARD <anthony.perard@...rix.com>
Subject: Re: [PATCH] xen-netback: Check for hotplug-status existence before
 watching

On Tue, May 18, 2021 at 07:57:16AM +0100, Paul Durrant wrote:
> On 17/05/2021 22:43, Marek Marczykowski-Górecki wrote:
> > On Tue, May 11, 2021 at 12:46:38PM +0000, Durrant, Paul wrote:
> > > I really can't remember any detail. Perhaps try reverting both patches then and check that the unbind/rmmod/modprobe/bind sequence still works (and the backend actually makes it into connected state).
> > 
> > Ok, I've tried this. I've reverted both commits, then used your test
> > script from the 9476654bd5e8ad42abe8ee9f9e90069ff8e60c17:
> >      This has been tested by running iperf as a server in the test VM and
> >      then running a client against it in a continuous loop, whilst also
> >      running:
> >      while true;
> >        do echo vif-$DOMID-$VIF >unbind;
> >        echo down;
> >        rmmod xen-netback;
> >        echo unloaded;
> >        modprobe xen-netback;
> >        cd $(pwd);
> >        brctl addif xenbr0 vif$DOMID.$VIF;
> >        ip link set vif$DOMID.$VIF up;
> >        echo up;
> >        sleep 5;
> >        done
> >      in dom0 from /sys/bus/xen-backend/drivers/vif to continuously unbind,
> >      unload, re-load, re-bind and re-plumb the backend.
> > In fact, the need to call `brctl` and `ip link` manually is exactly
> > because the hotplug script isn't executed. When I execute it manually,
> > the backend properly gets back to working. So, removing 'hotplug-status'
> > was in the correct place (netback_remove). The missing part is the toolstack
> > calling the hotplug script on xen-netback re-bind.
> > 
> 
> Why is that missing? We're going behind the back of the toolstack to do the
> unbind and bind so why should we expect it to re-execute a hotplug script?

Ok, then simply execute the whole hotplug script (instead of its subset)
after re-loading the backend module and everything will be fine.

For example like this:
    XENBUS_PATH=backend/vif/$DOMID/$VIF \
    XENBUS_TYPE=vif \
    XENBUS_BASE_PATH=backend \
    script=/etc/xen/scripts/vif-bridge \
    vif=vif.$DOMID.$VIF \
    /etc/xen/scripts/vif-bridge online

(...)

> > In short: if device gets XenbusStateInitWait for the first time (ddev ==
> > NULL case), it goes to add_device() which executes the hotplug script
> > and stores the device.
> > Then, if device goes to XenbusStateClosed + online==0 state, then it
> > executes hotplug script again (with "offline" parameter) and forgets the
> > device. If you unbind the driver, the device stays in
> > XenbusStateConnected state (in xenstore), and after you bind it again,
> > it goes to XenbusStateInitWait. It don't think it goes through
> > XenbusStateClosed, and online stays at 1 too, so libxl doesn't execute
> > the hotplug script again.
> 
> This is pretty key. The frontend should not notice an unbind/bind i.e. there
> should be no evidence of it happening by examining states in xenstore (from
> the guest side).

If you update the backend module, I think the frontend needs at least to
re-evaluate feature-* nodes. In case of applying just a bug fix, they
should not change (in theory), but technically that would be the correct
thing to do.

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)

Powered by blists - more mailing lists