lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1621402253-27200-14-git-send-email-tanghui20@huawei.com>
Date:   Wed, 19 May 2021 13:30:46 +0800
From:   Hui Tang <tanghui20@...wei.com>
To:     <davem@...emloft.net>, <kuba@...nel.org>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Hui Tang <tanghui20@...wei.com>,
        Masahiro Yamada <masahiroy@...nel.org>
Subject: [PATCH 13/20] net: seeq: remove leading spaces before tabs

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'
	$ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/'

Cc: Masahiro Yamada <masahiroy@...nel.org>
Signed-off-by: Hui Tang <tanghui20@...wei.com>
---
 drivers/net/ethernet/seeq/ether3.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c
index 65c9883..16a4cba 100644
--- a/drivers/net/ethernet/seeq/ether3.c
+++ b/drivers/net/ethernet/seeq/ether3.c
@@ -617,7 +617,7 @@ if (next_ptr < RX_START || next_ptr >= RX_END) {
  break;
 }
 		/*
- 		 * ignore our own packets...
+		 * ignore our own packets...
 	 	 */
 		if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) &&
 		    !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) {
@@ -672,7 +672,7 @@ if (next_ptr < RX_START || next_ptr >= RX_END) {
 	 */
 	if (!(ether3_inw(REG_STATUS) & STAT_RXON)) {
 		dev->stats.rx_dropped++;
-    		ether3_outw(next_ptr, REG_RECVPTR);
+		ether3_outw(next_ptr, REG_RECVPTR);
 		ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND);
 	}
 
@@ -690,11 +690,11 @@ static void ether3_tx(struct net_device *dev)
 	do {
 	    	unsigned long status;
 
-    		/*
+		/*
 	    	 * Read the packet header
-    		 */
+		 */
 	    	ether3_setbuffer(dev, buffer_read, tx_tail * 0x600);
-    		status = ether3_readlong(dev);
+		status = ether3_readlong(dev);
 
 		/*
 		 * Check to see if this packet has been transmitted
-- 
2.8.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ