netdev - [PATCH 3/5] ARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 20 May 2021 15:58:37 +0200
From:   Geert Uytterhoeven <geert+renesas@...der.be>
To:     Rob Herring <robh+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     devicetree@...r.kernel.org, netdev@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-mips@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH 3/5] ARM: dts: qcom-apq8060: Correct Ethernet node name and drop bogus irq property

make dtbs_check:

    ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$'
    ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+'

There is no "smsc,irq-active-low" property, as active low is the
default.

Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index dace8ffeb99118cb..0a4ffd10c48464f5 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -581,7 +581,7 @@ external-bus@...00000 {
 			 * EBI2. This has a 25MHz chrystal next to it, so no
 			 * clocking is needed.
 			 */
-			ethernet-ebi2@2,0 {
+			ethernet@2,0 {
 				compatible = "smsc,lan9221", "smsc,lan9115";
 				reg = <2 0x0 0x100>;
 				/*
@@ -598,8 +598,6 @@ ethernet-ebi2@2,0 {
 				phy-mode = "mii";
 				reg-io-width = <2>;
 				smsc,force-external-phy;
-				/* IRQ on edge falling = active low */
-				smsc,irq-active-low;
 				smsc,irq-push-pull;
 
 				/*
-- 
2.25.1