[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210524232214.1378937-13-olteanv@gmail.com>
Date: Tue, 25 May 2021 02:22:13 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Jakub Kicinski <kuba@...nel.org>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <vladimir.oltean@....com>,
Russell King <linux@...linux.org.uk>
Subject: [PATCH net-next 12/13] net: dsa: sja1105: expose the SGMII PCS as an mdio_device
From: Vladimir Oltean <vladimir.oltean@....com>
The SJA1110 has up to 4 PCSes for SGMII/2500base-x, and they have a
different access procedure compared to the SJA1105. Since both have a
register layout reminiscent of clause 45, the chosen abstraction to hide
this difference away was to implement an internal MDIO bus for the PCS,
and to use a high-level set of procedures called sja1105_pcs_read and
sja1105_pcs_write.
Since we touch all PCS accessors again, now it is a good time to check
for error codes from the hardware access as well. We can't propagate the
errors very far due to phylink returning void for mac_config and
mac_link_up, but at least we print them to the console.
The SGMII PCS of the SJA1110 is not functional at this point, it needs a
different initialization sequence compared to SJA1105. That will be done
by the next patch.
Cc: Russell King <linux@...linux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
drivers/net/dsa/sja1105/sja1105.h | 12 ++
drivers/net/dsa/sja1105/sja1105_main.c | 93 +++++----
drivers/net/dsa/sja1105/sja1105_mdio.c | 241 ++++++++++++++++++++++++
drivers/net/dsa/sja1105/sja1105_sgmii.h | 2 -
drivers/net/dsa/sja1105/sja1105_spi.c | 15 ++
5 files changed, 310 insertions(+), 53 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index 80966d7ce318..be788ddb7259 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -69,6 +69,7 @@ struct sja1105_regs {
u64 stats[__MAX_SJA1105_STATS_AREA][SJA1105_MAX_NUM_PORTS];
u64 mdio_100base_tx;
u64 mdio_100base_t1;
+ u64 pcs_base[SJA1105_MAX_NUM_PORTS];
};
struct sja1105_mdio_private {
@@ -129,6 +130,8 @@ struct sja1105_info {
void (*ptp_cmd_packing)(u8 *buf, struct sja1105_ptp_cmd *cmd,
enum packing_op op);
int (*clocking_setup)(struct sja1105_private *priv);
+ int (*pcs_mdio_read)(struct mii_bus *bus, int phy, int reg);
+ int (*pcs_mdio_write)(struct mii_bus *bus, int phy, int reg, u16 val);
const char *name;
bool supports_mii[SJA1105_MAX_NUM_PORTS];
bool supports_rmii[SJA1105_MAX_NUM_PORTS];
@@ -260,6 +263,8 @@ struct sja1105_private {
struct sja1105_cbs_entry *cbs;
struct mii_bus *mdio_base_t1;
struct mii_bus *mdio_base_tx;
+ struct mii_bus *mdio_pcs;
+ struct mdio_device *pcs[SJA1105_MAX_NUM_PORTS];
struct sja1105_tagger_data tagger_data;
struct sja1105_ptp_data ptp_data;
struct sja1105_tas_data tas_data;
@@ -292,6 +297,13 @@ void sja1105_frame_memory_partitioning(struct sja1105_private *priv);
/* From sja1105_mdio.c */
int sja1105_mdiobus_register(struct dsa_switch *ds);
void sja1105_mdiobus_unregister(struct dsa_switch *ds);
+int sja1105_pcs_mdio_read(struct mii_bus *bus, int phy, int reg);
+int sja1105_pcs_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val);
+int sja1110_pcs_mdio_read(struct mii_bus *bus, int phy, int reg);
+int sja1110_pcs_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val);
+int sja1105_pcs_read(struct sja1105_private *priv, int port, int mmd, int reg);
+int sja1105_pcs_write(struct sja1105_private *priv, int port, int mmd, int reg,
+ u16 val);
/* From sja1105_devlink.c */
int sja1105_devlink_setup(struct dsa_switch *ds);
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 20c5dcd8de8d..d0938daacbae 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -962,74 +962,61 @@ static int sja1105_parse_dt(struct sja1105_private *priv,
return rc;
}
-static int sja1105_sgmii_read(struct sja1105_private *priv, int port, int mmd,
- int pcs_reg)
-{
- u64 addr = (mmd << 16) | pcs_reg;
- u32 val;
- int rc;
-
- if (port != SJA1105_SGMII_PORT)
- return -ENODEV;
-
- rc = sja1105_xfer_u32(priv, SPI_READ, addr, &val, NULL);
- if (rc < 0)
- return rc;
-
- return val;
-}
-
-static int sja1105_sgmii_write(struct sja1105_private *priv, int port, int mmd,
- int pcs_reg, u16 pcs_val)
-{
- u64 addr = (mmd << 16) | pcs_reg;
- u32 val = pcs_val;
- int rc;
-
- if (port != SJA1105_SGMII_PORT)
- return -ENODEV;
-
- rc = sja1105_xfer_u32(priv, SPI_WRITE, addr, &val, NULL);
- if (rc < 0)
- return rc;
-
- return val;
-}
-
static void sja1105_sgmii_pcs_config(struct sja1105_private *priv, int port,
bool an_enabled, bool an_master)
{
u16 ac = SJA1105_AC_AUTONEG_MODE_SGMII;
+ int rc;
/* DIGITAL_CONTROL_1: Enable vendor-specific MMD1, allow the PHY to
* stop the clock during LPI mode, make the MAC reconfigure
* autonomously after PCS autoneg is done, flush the internal FIFOs.
*/
- sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, SJA1105_DC1,
- SJA1105_DC1_EN_VSMMD1 |
- SJA1105_DC1_CLOCK_STOP_EN |
- SJA1105_DC1_MAC_AUTO_SW |
- SJA1105_DC1_INIT);
+ rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1105_DC1,
+ SJA1105_DC1_EN_VSMMD1 |
+ SJA1105_DC1_CLOCK_STOP_EN |
+ SJA1105_DC1_MAC_AUTO_SW |
+ SJA1105_DC1_INIT);
+ if (rc < 0)
+ goto out_write_failed;
+
/* DIGITAL_CONTROL_2: No polarity inversion for TX and RX lanes */
- sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, SJA1105_DC2,
- SJA1105_DC2_TX_POL_INV_DISABLE);
+ rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1105_DC2,
+ SJA1105_DC2_TX_POL_INV_DISABLE);
+ if (rc < 0)
+ goto out_write_failed;
+
/* AUTONEG_CONTROL: Use SGMII autoneg */
if (an_master)
ac |= SJA1105_AC_PHY_MODE | SJA1105_AC_SGMII_LINK;
- sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, SJA1105_AC, ac);
+
+ rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, SJA1105_AC, ac);
+ if (rc < 0)
+ goto out_write_failed;
+
/* BASIC_CONTROL: enable in-band AN now, if requested. Otherwise,
* sja1105_sgmii_pcs_force_speed must be called later for the link
* to become operational.
*/
- if (an_enabled)
- sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1,
- BMCR_ANENABLE | BMCR_ANRESTART);
+ if (an_enabled) {
+ rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1,
+ BMCR_ANENABLE | BMCR_ANRESTART);
+ if (rc < 0)
+ goto out_write_failed;
+ }
+
+ return;
+
+out_write_failed:
+ dev_err(priv->ds->dev, "Failed to write to PCS: %pe\n",
+ ERR_PTR(rc));
}
static void sja1105_sgmii_pcs_force_speed(struct sja1105_private *priv,
int port, int speed)
{
int pcs_speed;
+ int rc;
switch (speed) {
case SPEED_1000:
@@ -1045,8 +1032,12 @@ static void sja1105_sgmii_pcs_force_speed(struct sja1105_private *priv,
dev_err(priv->ds->dev, "Invalid speed %d\n", speed);
return;
}
- sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1,
- pcs_speed | BMCR_FULLDPLX);
+
+ rc = sja1105_pcs_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1,
+ pcs_speed | BMCR_FULLDPLX);
+ if (rc < 0)
+ dev_err(priv->ds->dev, "Failed to write to PCS: %pe\n",
+ ERR_PTR(rc));
}
/* Convert link speed from SJA1105 to ethtool encoding */
@@ -1250,7 +1241,7 @@ static int sja1105_mac_pcs_get_state(struct dsa_switch *ds, int port,
int ais;
/* Read the vendor-specific AUTONEG_INTR_STATUS register */
- ais = sja1105_sgmii_read(priv, port, MDIO_MMD_VEND2, SJA1105_AIS);
+ ais = sja1105_pcs_read(priv, port, MDIO_MMD_VEND2, SJA1105_AIS);
if (ais < 0)
return ais;
@@ -1955,9 +1946,9 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
mac[i].speed = priv->info->port_speed[SJA1105_SPEED_AUTO];
if (priv->phy_mode[i] == PHY_INTERFACE_MODE_SGMII)
- bmcr[i] = sja1105_sgmii_read(priv, i,
- MDIO_MMD_VEND2,
- MDIO_CTRL1);
+ bmcr[i] = sja1105_pcs_read(priv, i,
+ MDIO_MMD_VEND2,
+ MDIO_CTRL1);
}
/* No PTP operations can run right now */
diff --git a/drivers/net/dsa/sja1105/sja1105_mdio.c b/drivers/net/dsa/sja1105/sja1105_mdio.c
index a3fe6b664807..7e83dd0f4f16 100644
--- a/drivers/net/dsa/sja1105/sja1105_mdio.c
+++ b/drivers/net/dsa/sja1105/sja1105_mdio.c
@@ -4,6 +4,159 @@
#include <linux/of_mdio.h>
#include "sja1105.h"
+#define SJA1110_PCS_BANK_REG SJA1110_SPI_ADDR(0x3fc)
+
+int sja1105_pcs_read(struct sja1105_private *priv, int port, int mmd, int reg)
+{
+ u32 reg_addr = MII_ADDR_C45 | mmd << 16 | reg;
+ struct mdio_device *pcs = priv->pcs[port];
+
+ if (!pcs)
+ return -ENODEV;
+
+ return mdiobus_read(priv->mdio_pcs, port, reg_addr);
+}
+
+int sja1105_pcs_write(struct sja1105_private *priv, int port, int mmd, int reg,
+ u16 val)
+{
+ u32 reg_addr = MII_ADDR_C45 | mmd << 16 | reg;
+ struct mdio_device *pcs = priv->pcs[port];
+
+ if (!pcs)
+ return -ENODEV;
+
+ return mdiobus_write(priv->mdio_pcs, port, reg_addr, val);
+}
+
+int sja1105_pcs_mdio_read(struct mii_bus *bus, int phy, int reg)
+{
+ struct sja1105_mdio_private *mdio_priv = bus->priv;
+ struct sja1105_private *priv = mdio_priv->priv;
+ u64 addr;
+ u32 tmp;
+ u16 mmd;
+ int rc;
+
+ if (!(reg & MII_ADDR_C45))
+ return -EINVAL;
+
+ mmd = (reg >> MII_DEVADDR_C45_SHIFT) & 0x1f;
+ addr = (mmd << 16) | (reg & GENMASK(15, 0));
+
+ rc = sja1105_xfer_u32(priv, SPI_READ, addr, &tmp, NULL);
+ if (rc < 0)
+ return rc;
+
+ return tmp & 0xffff;
+}
+
+int sja1105_pcs_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
+{
+ struct sja1105_mdio_private *mdio_priv = bus->priv;
+ struct sja1105_private *priv = mdio_priv->priv;
+ u64 addr;
+ u32 tmp;
+ u16 mmd;
+
+ if (!(reg & MII_ADDR_C45))
+ return -EINVAL;
+
+ mmd = (reg >> MII_DEVADDR_C45_SHIFT) & 0x1f;
+ addr = (mmd << 16) | (reg & GENMASK(15, 0));
+ tmp = val;
+
+ return sja1105_xfer_u32(priv, SPI_WRITE, addr, &tmp, NULL);
+}
+
+int sja1110_pcs_mdio_read(struct mii_bus *bus, int phy, int reg)
+{
+ struct sja1105_mdio_private *mdio_priv = bus->priv;
+ struct sja1105_private *priv = mdio_priv->priv;
+ const struct sja1105_regs *regs = priv->info->regs;
+ int offset, bank;
+ u64 addr;
+ u32 tmp;
+ u16 mmd;
+ int rc;
+
+ if (!(reg & MII_ADDR_C45))
+ return -EINVAL;
+
+ /* This addressing scheme reserves register 0xff for the bank address
+ * register, so that can never be addressed.
+ */
+ if (WARN_ON(offset == 0xff))
+ return -ENODEV;
+
+ if (regs->pcs_base[phy] == SJA1105_RSV_ADDR)
+ return -ENODEV;
+
+ mmd = (reg >> MII_DEVADDR_C45_SHIFT) & 0x1f;
+ addr = (mmd << 16) | (reg & GENMASK(15, 0));
+
+ bank = addr >> 8;
+ offset = addr & GENMASK(7, 0);
+
+ tmp = bank;
+
+ rc = sja1105_xfer_u32(priv, SPI_WRITE,
+ regs->pcs_base[phy] + SJA1110_PCS_BANK_REG,
+ &tmp, NULL);
+ if (rc < 0)
+ return rc;
+
+ rc = sja1105_xfer_u32(priv, SPI_READ, regs->pcs_base[phy] + offset,
+ &tmp, NULL);
+ if (rc < 0)
+ return rc;
+
+ return tmp & 0xffff;
+}
+
+int sja1110_pcs_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
+{
+ struct sja1105_mdio_private *mdio_priv = bus->priv;
+ struct sja1105_private *priv = mdio_priv->priv;
+ const struct sja1105_regs *regs = priv->info->regs;
+ int offset, bank;
+ u64 addr;
+ u32 tmp;
+ u16 mmd;
+ int rc;
+
+ if (!(reg & MII_ADDR_C45))
+ return -EINVAL;
+
+ /* This addressing scheme reserves register 0xff for the bank address
+ * register, so that can never be addressed.
+ */
+ if (WARN_ON(offset == 0xff))
+ return -ENODEV;
+
+ if (regs->pcs_base[phy] == SJA1105_RSV_ADDR)
+ return -ENODEV;
+
+ mmd = (reg >> MII_DEVADDR_C45_SHIFT) & 0x1f;
+ addr = (mmd << 16) | (reg & GENMASK(15, 0));
+
+ bank = addr >> 8;
+ offset = addr & GENMASK(7, 0);
+
+ tmp = bank;
+
+ rc = sja1105_xfer_u32(priv, SPI_WRITE,
+ regs->pcs_base[phy] + SJA1110_PCS_BANK_REG,
+ &tmp, NULL);
+ if (rc < 0)
+ return rc;
+
+ tmp = val;
+
+ return sja1105_xfer_u32(priv, SPI_WRITE, regs->pcs_base[phy] + offset,
+ &tmp, NULL);
+}
+
enum sja1105_mdio_opcode {
SJA1105_C45_ADDR = 0,
SJA1105_C22 = 1,
@@ -239,6 +392,88 @@ static void sja1105_mdiobus_base_t1_unregister(struct sja1105_private *priv)
priv->mdio_base_t1 = NULL;
}
+static int sja1105_mdiobus_pcs_register(struct sja1105_private *priv)
+{
+ struct sja1105_mdio_private *mdio_priv;
+ struct dsa_switch *ds = priv->ds;
+ struct mii_bus *bus;
+ int rc = 0;
+ int port;
+
+ if (!priv->info->pcs_mdio_read || !priv->info->pcs_mdio_write)
+ return 0;
+
+ bus = mdiobus_alloc_size(sizeof(*mdio_priv));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "SJA1105 PCS MDIO bus";
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-pcs",
+ dev_name(ds->dev));
+ bus->read = priv->info->pcs_mdio_read;
+ bus->write = priv->info->pcs_mdio_write;
+ bus->parent = ds->dev;
+ mdio_priv = bus->priv;
+ mdio_priv->priv = priv;
+
+ /* We don't register this MDIO bus because there is no PHY on it */
+
+ for (port = 0; port < ds->num_ports; port++) {
+ struct mdio_device *mdiodev;
+
+ if (dsa_is_unused_port(ds, port))
+ continue;
+
+ if (!priv->info->supports_sgmii[port])
+ continue;
+
+ mdiodev = mdio_device_create(bus, port);
+ if (IS_ERR(mdiodev)) {
+ rc = PTR_ERR(mdiodev);
+ goto out_pcs_free;
+ }
+
+ priv->pcs[port] = mdiodev;
+ }
+
+ priv->mdio_pcs = bus;
+
+ return 0;
+
+out_pcs_free:
+ for (port = 0; port < ds->num_ports; port++) {
+ if (!priv->pcs[port])
+ continue;
+
+ mdio_device_free(priv->pcs[port]);
+ priv->pcs[port] = NULL;
+ }
+
+ mdiobus_free(bus);
+
+ return rc;
+}
+
+static void sja1105_mdiobus_pcs_unregister(struct sja1105_private *priv)
+{
+ struct dsa_switch *ds = priv->ds;
+ int port;
+
+ if (!priv->mdio_pcs)
+ return;
+
+ for (port = 0; port < ds->num_ports; port++) {
+ if (!priv->pcs[port])
+ continue;
+
+ mdio_device_free(priv->pcs[port]);
+ priv->pcs[port] = NULL;
+ }
+
+ mdiobus_free(priv->mdio_pcs);
+ priv->mdio_pcs = NULL;
+}
+
int sja1105_mdiobus_register(struct dsa_switch *ds)
{
struct sja1105_private *priv = ds->priv;
@@ -247,6 +482,10 @@ int sja1105_mdiobus_register(struct dsa_switch *ds)
struct device_node *mdio_node;
int rc;
+ rc = sja1105_mdiobus_pcs_register(priv);
+ if (rc)
+ return rc;
+
mdio_node = of_get_child_by_name(switch_node, "mdio");
if (!mdio_node)
return 0;
@@ -275,6 +514,7 @@ int sja1105_mdiobus_register(struct dsa_switch *ds)
sja1105_mdiobus_base_tx_unregister(priv);
err_put_mdio_node:
of_node_put(mdio_node);
+ sja1105_mdiobus_pcs_unregister(priv);
return rc;
}
@@ -285,4 +525,5 @@ void sja1105_mdiobus_unregister(struct dsa_switch *ds)
sja1105_mdiobus_base_t1_unregister(priv);
sja1105_mdiobus_base_tx_unregister(priv);
+ sja1105_mdiobus_pcs_unregister(priv);
}
diff --git a/drivers/net/dsa/sja1105/sja1105_sgmii.h b/drivers/net/dsa/sja1105/sja1105_sgmii.h
index 24d9bc046e70..dc067b876758 100644
--- a/drivers/net/dsa/sja1105/sja1105_sgmii.h
+++ b/drivers/net/dsa/sja1105/sja1105_sgmii.h
@@ -4,8 +4,6 @@
#ifndef _SJA1105_SGMII_H
#define _SJA1105_SGMII_H
-#define SJA1105_SGMII_PORT 4
-
/* DIGITAL_CONTROL_1 (address 1f8000h) */
#define SJA1105_DC1 0x8000
#define SJA1105_DC1_VS_RESET BIT(15)
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index 54ecb5565761..e6c2cb68fcc4 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -561,6 +561,9 @@ static struct sja1105_regs sja1110_regs = {
.ptpsyncts = SJA1110_SPI_ADDR(0x84),
.mdio_100base_tx = 0x1c2400,
.mdio_100base_t1 = 0x1c1000,
+ .pcs_base = {SJA1105_RSV_ADDR, 0x1c1400, 0x1c1800, 0x1c1c00, 0x1c2000,
+ SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
+ SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
};
const struct sja1105_info sja1105e_info = {
@@ -707,6 +710,8 @@ const struct sja1105_info sja1105r_info = {
.fdb_del_cmd = sja1105pqrs_fdb_del,
.ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.clocking_setup = sja1105_clocking_setup,
+ .pcs_mdio_read = sja1105_pcs_mdio_read,
+ .pcs_mdio_write = sja1105_pcs_mdio_write,
.regs = &sja1105pqrs_regs,
.port_speed = {
[SJA1105_SPEED_AUTO] = 0,
@@ -741,6 +746,8 @@ const struct sja1105_info sja1105s_info = {
.fdb_del_cmd = sja1105pqrs_fdb_del,
.ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.clocking_setup = sja1105_clocking_setup,
+ .pcs_mdio_read = sja1105_pcs_mdio_read,
+ .pcs_mdio_write = sja1105_pcs_mdio_write,
.port_speed = {
[SJA1105_SPEED_AUTO] = 0,
[SJA1105_SPEED_10MBPS] = 3,
@@ -774,6 +781,8 @@ const struct sja1105_info sja1110a_info = {
.fdb_del_cmd = sja1105pqrs_fdb_del,
.ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.clocking_setup = sja1110_clocking_setup,
+ .pcs_mdio_read = sja1110_pcs_mdio_read,
+ .pcs_mdio_write = sja1110_pcs_mdio_write,
.port_speed = {
[SJA1105_SPEED_AUTO] = 0,
[SJA1105_SPEED_10MBPS] = 4,
@@ -819,6 +828,8 @@ const struct sja1105_info sja1110b_info = {
.fdb_del_cmd = sja1105pqrs_fdb_del,
.ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.clocking_setup = sja1110_clocking_setup,
+ .pcs_mdio_read = sja1110_pcs_mdio_read,
+ .pcs_mdio_write = sja1110_pcs_mdio_write,
.port_speed = {
[SJA1105_SPEED_AUTO] = 0,
[SJA1105_SPEED_10MBPS] = 4,
@@ -864,6 +875,8 @@ const struct sja1105_info sja1110c_info = {
.fdb_del_cmd = sja1105pqrs_fdb_del,
.ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.clocking_setup = sja1110_clocking_setup,
+ .pcs_mdio_read = sja1110_pcs_mdio_read,
+ .pcs_mdio_write = sja1110_pcs_mdio_write,
.port_speed = {
[SJA1105_SPEED_AUTO] = 0,
[SJA1105_SPEED_10MBPS] = 4,
@@ -909,6 +922,8 @@ const struct sja1105_info sja1110d_info = {
.fdb_del_cmd = sja1105pqrs_fdb_del,
.ptp_cmd_packing = sja1105pqrs_ptp_cmd_packing,
.clocking_setup = sja1110_clocking_setup,
+ .pcs_mdio_read = sja1110_pcs_mdio_read,
+ .pcs_mdio_write = sja1110_pcs_mdio_write,
.port_speed = {
[SJA1105_SPEED_AUTO] = 0,
[SJA1105_SPEED_10MBPS] = 4,
--
2.25.1
Powered by blists - more mailing lists