| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210525113316.25416-1-po-hsu.lin@canonical.com>
Date: Tue, 25 May 2021 19:33:16 +0800
From: Po-Hsu Lin <po-hsu.lin@...onical.com>
To: linux-kselftest@...r.kernel.org, netdev@...r.kernel.org,
bpf@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: po-hsu.lin@...onical.com, shuah@...nel.org,
skhan@...uxfoundation.org, ast@...nel.org, daniel@...earbox.net,
andrii@...nel.org, kafai@...com, songliubraving@...com, yhs@...com,
john.fastabend@...il.com, kpsingh@...nel.org, davem@...emloft.net,
kuba@...nel.org, hawk@...nel.org, nikolay@...dia.com,
gnault@...hat.com, vladimir.oltean@....com, idosch@...dia.com,
baowen.zheng@...igine.com, danieller@...dia.com, petrm@...dia.com
Subject: [PATCHv2] selftests: Use kselftest skip code for skipped tests
There are several test cases still using exit 0 when they need to be
skipped. Use kselftest framework skip code instead so it can help us
to distinguish the proper return status.
Criterion to filter out what should be fixed in selftests directory:
grep -r "exit 0" -B1 | grep -i skip
This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.
V2: router_mpath_nh.sh and outer_mpath_nh_res.sh sources lib.sh,
there is no need to assign ksft_skip value in these two.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@...onical.com>
---
tools/testing/selftests/bpf/test_bpftool_build.sh | 5 ++++-
tools/testing/selftests/bpf/test_xdp_meta.sh | 5 ++++-
tools/testing/selftests/bpf/test_xdp_vlan.sh | 7 +++++--
tools/testing/selftests/net/fcnal-test.sh | 5 ++++-
tools/testing/selftests/net/fib_rule_tests.sh | 7 +++++--
tools/testing/selftests/net/forwarding/lib.sh | 5 ++++-
tools/testing/selftests/net/forwarding/router_mpath_nh.sh | 2 +-
tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh | 2 +-
tools/testing/selftests/net/run_afpackettests | 5 ++++-
tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh | 9 ++++++---
tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh | 9 ++++++---
tools/testing/selftests/net/unicast_extensions.sh | 5 ++++-
tools/testing/selftests/net/vrf_strict_mode_test.sh | 9 ++++++---
tools/testing/selftests/ptp/phc.sh | 7 +++++--
tools/testing/selftests/vm/charge_reserved_hugetlb.sh | 5 ++++-
tools/testing/selftests/vm/hugetlb_reparenting_test.sh | 5 ++++-
16 files changed, 67 insertions(+), 25 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_bpftool_build.sh b/tools/testing/selftests/bpf/test_bpftool_build.sh
index ac349a5..b6fab1e 100755
--- a/tools/testing/selftests/bpf/test_bpftool_build.sh
+++ b/tools/testing/selftests/bpf/test_bpftool_build.sh
@@ -1,6 +1,9 @@
#!/bin/bash
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
case $1 in
-h|--help)
echo -e "$0 [-j <n>]"
@@ -22,7 +25,7 @@ KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../)
cd $KDIR_ROOT_DIR
if [ ! -e tools/bpf/bpftool/Makefile ]; then
echo -e "skip: bpftool files not found!\n"
- exit 0
+ exit $ksft_skip
fi
ERROR=0
diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh
index 637fcf4..fd3f218 100755
--- a/tools/testing/selftests/bpf/test_xdp_meta.sh
+++ b/tools/testing/selftests/bpf/test_xdp_meta.sh
@@ -1,5 +1,8 @@
#!/bin/sh
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
cleanup()
{
if [ "$?" = "0" ]; then
@@ -17,7 +20,7 @@ cleanup()
ip link set dev lo xdp off 2>/dev/null > /dev/null
if [ $? -ne 0 ];then
echo "selftests: [SKIP] Could not run test without the ip xdp support"
- exit 0
+ exit $ksft_skip
fi
set -e
diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh
index bb8b0da..1aa7404 100755
--- a/tools/testing/selftests/bpf/test_xdp_vlan.sh
+++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh
@@ -2,6 +2,9 @@
# SPDX-License-Identifier: GPL-2.0
# Author: Jesper Dangaard Brouer <hawk@...nel.org>
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
# Allow wrapper scripts to name test
if [ -z "$TESTNAME" ]; then
TESTNAME=xdp_vlan
@@ -94,7 +97,7 @@ while true; do
-h | --help )
usage;
echo "selftests: $TESTNAME [SKIP] usage help info requested"
- exit 0
+ exit $ksft_skip
;;
* )
shift
@@ -117,7 +120,7 @@ fi
ip link set dev lo xdpgeneric off 2>/dev/null > /dev/null
if [ $? -ne 0 ]; then
echo "selftests: $TESTNAME [SKIP] need ip xdp support"
- exit 0
+ exit $ksft_skip
fi
# Interactive mode likely require us to cleanup netns
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index a8ad928..9074e25 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -37,6 +37,9 @@
#
# server / client nomenclature relative to ns-A
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
VERBOSE=0
NSA_DEV=eth1
@@ -3946,7 +3949,7 @@ fi
which nettest >/dev/null
if [ $? -ne 0 ]; then
echo "'nettest' command not found; skipping tests"
- exit 0
+ exit $ksft_skip
fi
declare -i nfail=0
diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh
index a93e6b6..43ea840 100755
--- a/tools/testing/selftests/net/fib_rule_tests.sh
+++ b/tools/testing/selftests/net/fib_rule_tests.sh
@@ -3,6 +3,9 @@
# This test is for checking IPv4 and IPv6 FIB rules API
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
ret=0
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
@@ -238,12 +241,12 @@ run_fibrule_tests()
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
# start clean
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 42e28c9..eed9f08 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -4,6 +4,9 @@
##############################################################################
# Defines
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
# Can be overridden by the configuration file.
PING=${PING:=ping}
PING6=${PING6:=ping6}
@@ -121,7 +124,7 @@ check_ethtool_lanes_support()
if [[ "$(id -u)" -ne 0 ]]; then
echo "SKIP: need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [[ "$CHECK_TC" = "yes" ]]; then
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
index 76efb1f..a0d612e 100755
--- a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
@@ -411,7 +411,7 @@ ping_ipv6()
ip nexthop ls >/dev/null 2>&1
if [ $? -ne 0 ]; then
echo "Nexthop objects not supported; skipping tests"
- exit 0
+ exit $ksft_skip
fi
trap cleanup EXIT
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
index 4898dd4..cb08ffe 100755
--- a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
@@ -386,7 +386,7 @@ ping_ipv6()
ip nexthop ls >/dev/null 2>&1
if [ $? -ne 0 ]; then
echo "Nexthop objects not supported; skipping tests"
- exit 0
+ exit $ksft_skip
fi
trap cleanup EXIT
diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests
index 8b42e8b..a59cb6a 100755
--- a/tools/testing/selftests/net/run_afpackettests
+++ b/tools/testing/selftests/net/run_afpackettests
@@ -1,9 +1,12 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
if [ $(id -u) != 0 ]; then
echo $msg must be run as root >&2
- exit 0
+ exit $ksft_skip
fi
ret=0
diff --git a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
index ad7a9fc..1003119 100755
--- a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
@@ -163,6 +163,9 @@
# +---------------------------------------------------+
#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
readonly LOCALSID_TABLE_ID=90
readonly IPv6_RT_NETWORK=fd00
readonly IPv4_HS_NETWORK=10.0.0
@@ -464,18 +467,18 @@ host_vpn_isolation_tests()
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
modprobe vrf &>/dev/null
if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
echo "SKIP: vrf sysctl does not exist"
- exit 0
+ exit $ksft_skip
fi
cleanup &>/dev/null
diff --git a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
index 68708f5..b9b06ef 100755
--- a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
@@ -164,6 +164,9 @@
# +---------------------------------------------------+
#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
readonly LOCALSID_TABLE_ID=90
readonly IPv6_RT_NETWORK=fd00
readonly IPv6_HS_NETWORK=cafe
@@ -472,18 +475,18 @@ host_vpn_isolation_tests()
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
modprobe vrf &>/dev/null
if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
echo "SKIP: vrf sysctl does not exist"
- exit 0
+ exit $ksft_skip
fi
cleanup &>/dev/null
diff --git a/tools/testing/selftests/net/unicast_extensions.sh b/tools/testing/selftests/net/unicast_extensions.sh
index dbf0421..728e4d5 100755
--- a/tools/testing/selftests/net/unicast_extensions.sh
+++ b/tools/testing/selftests/net/unicast_extensions.sh
@@ -28,12 +28,15 @@
# These tests provide an easy way to flip the expected result of any
# of these behaviors for testing kernel patches that change them.
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
# nettest can be run from PATH or from same directory as this selftest
if ! which nettest >/dev/null; then
PATH=$PWD:$PATH
if ! which nettest >/dev/null; then
echo "'nettest' command not found; skipping tests"
- exit 0
+ exit $ksft_skip
fi
fi
diff --git a/tools/testing/selftests/net/vrf_strict_mode_test.sh b/tools/testing/selftests/net/vrf_strict_mode_test.sh
index 18b982d..865d53c 100755
--- a/tools/testing/selftests/net/vrf_strict_mode_test.sh
+++ b/tools/testing/selftests/net/vrf_strict_mode_test.sh
@@ -3,6 +3,9 @@
# This test is designed for testing the new VRF strict_mode functionality.
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
ret=0
# identifies the "init" network namespace which is often called root network
@@ -371,18 +374,18 @@ vrf_strict_mode_check_support()
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
modprobe vrf &>/dev/null
if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
echo "SKIP: vrf sysctl does not exist"
- exit 0
+ exit $ksft_skip
fi
cleanup &> /dev/null
diff --git a/tools/testing/selftests/ptp/phc.sh b/tools/testing/selftests/ptp/phc.sh
index ac6e5a6..ca3c844c 100755
--- a/tools/testing/selftests/ptp/phc.sh
+++ b/tools/testing/selftests/ptp/phc.sh
@@ -1,6 +1,9 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
ALL_TESTS="
settime
adjtime
@@ -13,12 +16,12 @@ DEV=$1
if [[ "$(id -u)" -ne 0 ]]; then
echo "SKIP: need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [[ "$DEV" == "" ]]; then
echo "SKIP: PTP device not provided"
- exit 0
+ exit $ksft_skip
fi
require_command()
diff --git a/tools/testing/selftests/vm/charge_reserved_hugetlb.sh b/tools/testing/selftests/vm/charge_reserved_hugetlb.sh
index 18d3368..fe8fcfb 100644
--- a/tools/testing/selftests/vm/charge_reserved_hugetlb.sh
+++ b/tools/testing/selftests/vm/charge_reserved_hugetlb.sh
@@ -1,11 +1,14 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
set -e
if [[ $(id -u) -ne 0 ]]; then
echo "This test must be run as root. Skipping..."
- exit 0
+ exit $ksft_skip
fi
fault_limit_file=limit_in_bytes
diff --git a/tools/testing/selftests/vm/hugetlb_reparenting_test.sh b/tools/testing/selftests/vm/hugetlb_reparenting_test.sh
index d11d1fe..4a9a3af 100644
--- a/tools/testing/selftests/vm/hugetlb_reparenting_test.sh
+++ b/tools/testing/selftests/vm/hugetlb_reparenting_test.sh
@@ -1,11 +1,14 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
set -e
if [[ $(id -u) -ne 0 ]]; then
echo "This test must be run as root. Skipping..."
- exit 0
+ exit $ksft_skip
fi
usage_file=usage_in_bytes
--
2.7.4
Powered by blists - more mailing lists