[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210528082240.3863991-3-yangyingliang@huawei.com>
Date: Fri, 28 May 2021 16:22:40 +0800
From: Yang Yingliang <yangyingliang@...wei.com>
To: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
CC: <andrew@...n.ch>, <vivien.didelot@...il.com>, <davem@...emloft.net>
Subject: [PATCH -next 2/2] net: dsa: qca8k: add missing check return value in qca8k_phylink_mac_config()
Now we can check qca8k_read() return value correctly, so if
it fails, we need return directly.
Signed-off-by: Yang Yingliang <yangyingliang@...wei.com>
---
drivers/net/dsa/qca8k.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index a8c274227348..6fe963ba23e8 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1200,6 +1200,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
/* Enable/disable SerDes auto-negotiation as necessary */
ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
+ if (ret)
+ return;
if (phylink_autoneg_inband(mode))
val &= ~QCA8K_PWS_SERDES_AEN_DIS;
else
@@ -1208,6 +1210,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
/* Configure the SGMII parameters */
ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
+ if (ret)
+ return;
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
--
2.25.1
Powered by blists - more mailing lists