lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210530225939.772553-4-olteanv@gmail.com>
Date:   Mon, 31 May 2021 01:59:34 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     Jakub Kicinski <kuba@...nel.org>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Vladimir Oltean <vladimir.oltean@....com>,
        Russell King <linux@...linux.org.uk>,
        Heiner Kallweit <hkallweit1@...il.com>
Subject: [PATCH v3 net-next 3/8] net: dsa: sja1105: the 0x1F0000 SGMII "base address" is actually MDIO_MMD_VEND2

From: Vladimir Oltean <vladimir.oltean@....com>

Looking at the SGMII PCS from SJA1110, which is accessed indirectly
through a different base address as can be seen in the next patch, it
appears odd that the address accessed through indirection still
references the base address from the SJA1105S register map (first MDIO
register is at 0x1f0000), when it could index the SGMII registers
starting from zero.

Except that the 0x1f0000 is not a base address at all, it seems. It is
0x1f << 16 | 0x0000, and 0x1f is coding for the vendor-specific MMD2.
So, it turns out, the Synopsys PCS implements all its registers inside
the vendor-specific MMDs 1 and 2 (0x1e and 0x1f). This explains why the
PCS has no overlaps (for the other MMDs) with other register regions of
the switch (because no other MMDs are implemented).

Change the code to remove the SGMII "base address" and explicitly encode
the MMD for reads/writes. This will become necessary for SJA1110 support.

Cc: Russell King <linux@...linux.org.uk>
Cc: Heiner Kallweit <hkallweit1@...il.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
Changes in v3:
None.

Changes in v2:
None.

 drivers/net/dsa/sja1105/sja1105.h      |  1 -
 drivers/net/dsa/sja1105/sja1105_main.c | 31 +++++++++++++-------------
 drivers/net/dsa/sja1105/sja1105_spi.c  |  1 -
 3 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h
index 2ec03917feb3..830ea5ca359f 100644
--- a/drivers/net/dsa/sja1105/sja1105.h
+++ b/drivers/net/dsa/sja1105/sja1105.h
@@ -48,7 +48,6 @@ struct sja1105_regs {
 	u64 rgu;
 	u64 vl_status;
 	u64 config;
-	u64 sgmii;
 	u64 rmii_pll1;
 	u64 ptppinst;
 	u64 ptppindur;
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 1e4e05d429af..c8d93d810421 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -898,36 +898,34 @@ static int sja1105_parse_dt(struct sja1105_private *priv,
 	return rc;
 }
 
-static int sja1105_sgmii_read(struct sja1105_private *priv, int port,
+static int sja1105_sgmii_read(struct sja1105_private *priv, int port, int mmd,
 			      int pcs_reg)
 {
-	const struct sja1105_regs *regs = priv->info->regs;
+	u64 addr = (mmd << 16) | pcs_reg;
 	u32 val;
 	int rc;
 
 	if (port != SJA1105_SGMII_PORT)
 		return -ENODEV;
 
-	rc = sja1105_xfer_u32(priv, SPI_READ, regs->sgmii + pcs_reg,
-			      &val, NULL);
+	rc = sja1105_xfer_u32(priv, SPI_READ, addr, &val, NULL);
 	if (rc < 0)
 		return rc;
 
 	return val;
 }
 
-static int sja1105_sgmii_write(struct sja1105_private *priv, int port,
+static int sja1105_sgmii_write(struct sja1105_private *priv, int port, int mmd,
 			       int pcs_reg, u16 pcs_val)
 {
-	const struct sja1105_regs *regs = priv->info->regs;
+	u64 addr = (mmd << 16) | pcs_reg;
 	u32 val = pcs_val;
 	int rc;
 
 	if (port != SJA1105_SGMII_PORT)
 		return -ENODEV;
 
-	rc = sja1105_xfer_u32(priv, SPI_WRITE, regs->sgmii + pcs_reg,
-			      &val, NULL);
+	rc = sja1105_xfer_u32(priv, SPI_WRITE, addr, &val, NULL);
 	if (rc < 0)
 		return rc;
 
@@ -943,24 +941,24 @@ static void sja1105_sgmii_pcs_config(struct sja1105_private *priv, int port,
 	 * stop the clock during LPI mode, make the MAC reconfigure
 	 * autonomously after PCS autoneg is done, flush the internal FIFOs.
 	 */
-	sja1105_sgmii_write(priv, port, SJA1105_DC1,
+	sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, SJA1105_DC1,
 			    SJA1105_DC1_EN_VSMMD1 |
 			    SJA1105_DC1_CLOCK_STOP_EN |
 			    SJA1105_DC1_MAC_AUTO_SW |
 			    SJA1105_DC1_INIT);
 	/* DIGITAL_CONTROL_2: No polarity inversion for TX and RX lanes */
-	sja1105_sgmii_write(priv, port, SJA1105_DC2,
+	sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, SJA1105_DC2,
 			    SJA1105_DC2_TX_POL_INV_DISABLE);
 	/* AUTONEG_CONTROL: Use SGMII autoneg */
 	if (an_master)
 		ac |= SJA1105_AC_PHY_MODE | SJA1105_AC_SGMII_LINK;
-	sja1105_sgmii_write(priv, port, SJA1105_AC, ac);
+	sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, SJA1105_AC, ac);
 	/* BASIC_CONTROL: enable in-band AN now, if requested. Otherwise,
 	 * sja1105_sgmii_pcs_force_speed must be called later for the link
 	 * to become operational.
 	 */
 	if (an_enabled)
-		sja1105_sgmii_write(priv, port, MII_BMCR,
+		sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1,
 				    BMCR_ANENABLE | BMCR_ANRESTART);
 }
 
@@ -983,7 +981,8 @@ static void sja1105_sgmii_pcs_force_speed(struct sja1105_private *priv,
 		dev_err(priv->ds->dev, "Invalid speed %d\n", speed);
 		return;
 	}
-	sja1105_sgmii_write(priv, port, MII_BMCR, pcs_speed | BMCR_FULLDPLX);
+	sja1105_sgmii_write(priv, port, MDIO_MMD_VEND2, MDIO_CTRL1,
+			    pcs_speed | BMCR_FULLDPLX);
 }
 
 /* Convert link speed from SJA1105 to ethtool encoding */
@@ -1201,7 +1200,7 @@ static int sja1105_mac_pcs_get_state(struct dsa_switch *ds, int port,
 	int ais;
 
 	/* Read the vendor-specific AUTONEG_INTR_STATUS register */
-	ais = sja1105_sgmii_read(priv, port, SJA1105_AIS);
+	ais = sja1105_sgmii_read(priv, port, MDIO_MMD_VEND2, SJA1105_AIS);
 	if (ais < 0)
 		return ais;
 
@@ -1905,7 +1904,9 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
 		mac[i].speed = SJA1105_SPEED_AUTO;
 
 		if (sja1105_supports_sgmii(priv, i))
-			bmcr[i] = sja1105_sgmii_read(priv, i, MII_BMCR);
+			bmcr[i] = sja1105_sgmii_read(priv, i,
+						     MDIO_MMD_VEND2,
+						     MDIO_CTRL1);
 	}
 
 	/* No PTP operations can run right now */
diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c
index d0bc6cf90bfd..615e0906b1fa 100644
--- a/drivers/net/dsa/sja1105/sja1105_spi.c
+++ b/drivers/net/dsa/sja1105/sja1105_spi.c
@@ -440,7 +440,6 @@ static struct sja1105_regs sja1105pqrs_regs = {
 	.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
 	.pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
 	.pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814},
-	.sgmii = 0x1F0000,
 	.rmii_pll1 = 0x10000A,
 	.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
 	.stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208},
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ