[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210609231518.GA8706@linux.intel.com>
Date: Thu, 10 Jun 2021 07:15:18 +0800
From: Wong Vee Khee <vee.khee.wong@...ux.intel.com>
To: Vladimir Oltean <olteanv@...il.com>
Cc: Jakub Kicinski <kuba@...nel.org>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
Ong Boon Leong <boon.leong.ong@...el.com>,
Michael Sit Wei Hong <michael.wei.hong.sit@...el.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Vladimir Oltean <vladimir.oltean@....com>
Subject: Re: [PATCH net-next 03/13] net: stmmac: reduce indentation when
calling stmmac_xpcs_setup
On Wed, Jun 09, 2021 at 09:41:45PM +0300, Vladimir Oltean wrote:
> From: Vladimir Oltean <vladimir.oltean@....com>
>
> There is no reason to embed an if within an if, we can just logically
> AND the two conditions.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
Reviewed-by: Wong Vee Khee <vee.khee.wong@...ux.intel.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++------
> 1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 1c881ec8cd04..372673f9af30 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -7002,12 +7002,10 @@ int stmmac_dvr_probe(struct device *device,
> if (priv->plat->speed_mode_2500)
> priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
>
> - if (priv->plat->mdio_bus_data) {
> - if (priv->plat->mdio_bus_data->has_xpcs) {
> - ret = stmmac_xpcs_setup(priv->mii);
> - if (ret)
> - goto error_xpcs_setup;
> - }
> + if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
> + ret = stmmac_xpcs_setup(priv->mii);
> + if (ret)
> + goto error_xpcs_setup;
> }
>
> ret = stmmac_phy_setup(priv);
> --
> 2.25.1
>
Powered by blists - more mailing lists