[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210611200531.2384819-1-olteanv@gmail.com>
Date: Fri, 11 Jun 2021 23:05:18 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Jakub Kicinski <kuba@...nel.org>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc: Wong Vee Khee <vee.khee.wong@...ux.intel.com>,
Ong Boon Leong <boon.leong.ong@...el.com>,
Michael Sit Wei Hong <michael.wei.hong.sit@...el.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Vladimir Oltean <vladimir.oltean@....com>
Subject: [PATCH v3 net-next 00/13] Port the SJA1105 DSA driver to XPCS
From: Vladimir Oltean <vladimir.oltean@....com>
As requested when adding support for the NXP SJA1110, the SJA1105 driver
could make use of the common XPCS driver, to eliminate some hardware
specific code duplication.
This series modifies the XPCS driver so that it can accommodate the XPCS
instantiation from NXP switches, and the SJA1105 driver so it can expose
what the XPCS driver expects.
Tested on NXP SJA1105S and SJA1110A.
Changes in v3:
None. This is a resend of v2 which had "changes requested" even though
there was no direct feedback.
Changes in v2:
- fix module build (pcs-xpcs-nxp.c is not a different module so this
means that we need to change the name of pcs-xpcs.ko to pcs_xpcs.ko).
- delete sja1105_sgmii.h
- just check for priv->pcs[port] instead of checking the PHY interface
mode each time.
- add the 2500base-x check in one place where it was missing (before
mdio_device_create)
- remove it from a few places where it is no longer necessary now that
we check more generically for the presence of priv->xpcs[port]
Vladimir Oltean (13):
net: pcs: xpcs: rename mdio_xpcs_args to dw_xpcs
net: stmmac: reverse Christmas tree notation in stmmac_xpcs_setup
net: stmmac: reduce indentation when calling stmmac_xpcs_setup
net: pcs: xpcs: move register bit descriptions to a header file
net: pcs: xpcs: add support for sgmii with no inband AN
net: pcs: xpcs: also ignore phy id if it's all ones
net: pcs: xpcs: add support for NXP SJA1105
net: pcs: xpcs: add support for NXP SJA1110
net: pcs: xpcs: export xpcs_do_config and xpcs_link_up
net: dsa: sja1105: migrate to xpcs for SGMII
net: dsa: sja1105: register the PCS MDIO bus for SJA1110
net: dsa: sja1105: SGMII and 2500base-x on the SJA1110 are 'special'
net: dsa: sja1105: plug in support for 2500base-x
MAINTAINERS | 2 +
drivers/net/dsa/sja1105/Kconfig | 1 +
drivers/net/dsa/sja1105/sja1105.h | 9 +
drivers/net/dsa/sja1105/sja1105_main.c | 186 +++----------
drivers/net/dsa/sja1105/sja1105_mdio.c | 255 +++++++++++++++++
drivers/net/dsa/sja1105/sja1105_sgmii.h | 53 ----
drivers/net/dsa/sja1105/sja1105_spi.c | 17 ++
drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 10 +-
.../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 6 +-
drivers/net/pcs/Makefile | 4 +-
drivers/net/pcs/pcs-xpcs-nxp.c | 185 ++++++++++++
drivers/net/pcs/pcs-xpcs.c | 263 +++++++++---------
drivers/net/pcs/pcs-xpcs.h | 115 ++++++++
include/linux/pcs/pcs-xpcs.h | 21 +-
15 files changed, 772 insertions(+), 357 deletions(-)
delete mode 100644 drivers/net/dsa/sja1105/sja1105_sgmii.h
create mode 100644 drivers/net/pcs/pcs-xpcs-nxp.c
create mode 100644 drivers/net/pcs/pcs-xpcs.h
--
2.25.1
Powered by blists - more mailing lists