netdev - [PATCH net-next 1/8] net: phy: add a blank line after declarations

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1623393419-2521-2-git-send-email-liweihang@huawei.com>
Date:   Fri, 11 Jun 2021 14:36:52 +0800
From:   Weihang Li <liweihang@...wei.com>
To:     <davem@...emloft.net>, <kuba@...nel.org>, <andrew@...n.ch>,
        <hkallweit1@...il.com>
CC:     <netdev@...r.kernel.org>, <linuxarm@...wei.com>,
        Wenpeng Liang <liangwenpeng@...wei.com>,
        Richard Cochran <richardcochran@...il.com>,
        Weihang Li <liweihang@...wei.com>
Subject: [PATCH net-next 1/8] net: phy: add a blank line after declarations

From: Wenpeng Liang <liangwenpeng@...wei.com>

There should be a blank line after declarations.

Cc: Richard Cochran <richardcochran@...il.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@...wei.com>
Signed-off-by: Weihang Li <liweihang@...wei.com>
---
 drivers/net/phy/bcm87xx.c  | 4 ++--
 drivers/net/phy/dp83640.c  | 1 +
 drivers/net/phy/et1011c.c  | 6 ++++--
 drivers/net/phy/mdio_bus.c | 1 +
 drivers/net/phy/qsemi.c    | 1 +
 5 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index 4ac8fd1..3135634 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -54,9 +54,9 @@ static int bcm87xx_of_reg_init(struct phy_device *phydev)
 		u16 reg		= be32_to_cpup(paddr++);
 		u16 mask	= be32_to_cpup(paddr++);
 		u16 val_bits	= be32_to_cpup(paddr++);
-		int val;
 		u32 regnum = mdiobus_c45_addr(devid, reg);
-		val = 0;
+		int val = 0;
+
 		if (mask) {
 			val = phy_read(phydev, regnum);
 			if (val < 0) {
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 0d79f68..10769bf 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -615,6 +615,7 @@ static void prune_rx_ts(struct dp83640_private *dp83640)
 static void enable_broadcast(struct phy_device *phydev, int init_page, int on)
 {
 	int val;
+
 	phy_write(phydev, PAGESEL, 0);
 	val = phy_read(phydev, PHYCR2);
 	if (on)
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index 09e07b9..4b3d035 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -46,7 +46,8 @@ MODULE_LICENSE("GPL");
 
 static int et1011c_config_aneg(struct phy_device *phydev)
 {
-	int ctl = 0;
+	int ctl;
+
 	ctl = phy_read(phydev, MII_BMCR);
 	if (ctl < 0)
 		return ctl;
@@ -60,9 +61,10 @@ static int et1011c_config_aneg(struct phy_device *phydev)
 
 static int et1011c_read_status(struct phy_device *phydev)
 {
+	static int speed;
 	int ret;
 	u32 val;
-	static int speed;
+
 	ret = genphy_read_status(phydev);
 
 	if (speed != phydev->speed) {
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6045ad3..2466567 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -175,6 +175,7 @@ EXPORT_SYMBOL(mdiobus_alloc_size);
 static void mdiobus_release(struct device *d)
 {
 	struct mii_bus *bus = to_mii_bus(d);
+
 	BUG_ON(bus->state != MDIOBUS_RELEASED &&
 	       /* for compatibility with error handling in drivers */
 	       bus->state != MDIOBUS_ALLOCATED);
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index d5c1aaa..30d15f7 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -100,6 +100,7 @@ static int qs6612_ack_interrupt(struct phy_device *phydev)
 static int qs6612_config_intr(struct phy_device *phydev)
 {
 	int err;
+
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		/* clear any interrupts before enabling them */
 		err = qs6612_ack_interrupt(phydev);
-- 
2.8.1