netdev - [net-next: PATCH 1/3] net: mvmdio: add ACPI support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210613183520.2247415-2-mw@semihalf.com>
Date:   Sun, 13 Jun 2021 20:35:18 +0200
From:   Marcin Wojtas <mw@...ihalf.com>
To:     linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Cc:     davem@...emloft.net, kuba@...nel.org, linux@...linux.org.uk,
        jaz@...ihalf.com, gjb@...ihalf.com, upstream@...ihalf.com,
        Samer.El-Haj-Mahmoud@....com, jon@...id-run.com,
        Marcin Wojtas <mw@...ihalf.com>
Subject: [net-next: PATCH 1/3] net: mvmdio: add ACPI support

This patch introducing ACPI support for the mvmdio driver by adding
acpi_match_table with two entries:

* "MRVL0100" for the SMI operation
* "MRVL0101" for the XSMI mode

Also clk enabling is skipped, because the tables do not contain
such data and clock maintenance relies on the firmware.

Signed-off-by: Marcin Wojtas <mw@...ihalf.com>
---
 drivers/net/ethernet/marvell/mvmdio.c | 27 +++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index d14762d93640..e66355a0f546 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -17,6 +17,8 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
@@ -281,7 +283,7 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	struct orion_mdio_dev *dev;
 	int i, ret;
 
-	type = (enum orion_mdio_bus_type)of_device_get_match_data(&pdev->dev);
+	type = (enum orion_mdio_bus_type)device_get_match_data(&pdev->dev);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r) {
@@ -336,7 +338,7 @@ static int orion_mdio_probe(struct platform_device *pdev)
 			dev_warn(&pdev->dev,
 				 "unsupported number of clocks, limiting to the first "
 				 __stringify(ARRAY_SIZE(dev->clk)) "\n");
-	} else {
+	} else if (!has_acpi_companion(&pdev->dev)) {
 		dev->clk[0] = clk_get(&pdev->dev, NULL);
 		if (PTR_ERR(dev->clk[0]) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
@@ -369,7 +371,12 @@ static int orion_mdio_probe(struct platform_device *pdev)
 		goto out_mdio;
 	}
 
-	ret = of_mdiobus_register(bus, pdev->dev.of_node);
+	if (pdev->dev.of_node)
+		ret = of_mdiobus_register(bus, pdev->dev.of_node);
+	else if (is_acpi_node(pdev->dev.fwnode))
+		ret = acpi_mdiobus_register(bus, pdev->dev.fwnode);
+	else
+		ret = -EINVAL;
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
 		goto out_mdio;
@@ -383,6 +390,9 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	if (dev->err_interrupt > 0)
 		writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
 
+	if (has_acpi_companion(&pdev->dev))
+		return ret;
+
 out_clk:
 	for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
 		if (IS_ERR(dev->clk[i]))
@@ -404,6 +414,9 @@ static int orion_mdio_remove(struct platform_device *pdev)
 		writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
 	mdiobus_unregister(bus);
 
+	if (has_acpi_companion(&pdev->dev))
+		return 0;
+
 	for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
 		if (IS_ERR(dev->clk[i]))
 			break;
@@ -421,12 +434,20 @@ static const struct of_device_id orion_mdio_match[] = {
 };
 MODULE_DEVICE_TABLE(of, orion_mdio_match);
 
+static const struct acpi_device_id orion_mdio_acpi_match[] = {
+	{ "MRVL0100", BUS_TYPE_SMI },
+	{ "MRVL0101", BUS_TYPE_XSMI },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, orion_mdio_acpi_match);
+
 static struct platform_driver orion_mdio_driver = {
 	.probe = orion_mdio_probe,
 	.remove = orion_mdio_remove,
 	.driver = {
 		.name = "orion-mdio",
 		.of_match_table = orion_mdio_match,
+		.acpi_match_table = ACPI_PTR(orion_mdio_acpi_match),
 	},
 };
 
-- 
2.29.0