| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1623670131-49973-2-git-send-email-huangguangbin2@huawei.com>
Date: Mon, 14 Jun 2021 19:28:41 +0800
From: Guangbin Huang <huangguangbin2@...wei.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <xie.he.0141@...il.com>,
<ms@....tdt.de>, <willemb@...gle.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<lipeng321@...wei.com>, <huangguangbin2@...wei.com>
Subject: [PATCH V2 net-next 01/11] net: z85230: remove redundant blank lines
From: Peng Li <lipeng321@...wei.com>
This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@...wei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@...wei.com>
---
drivers/net/wan/z85230.c | 34 +---------------------------------
1 file changed, 1 insertion(+), 33 deletions(-)
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 002b8c99..f074cb1 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -55,7 +55,6 @@
#include "z85230.h"
-
/**
* z8530_read_port - Architecture specific interface function
* @p: port to read
@@ -95,7 +94,6 @@ static inline int z8530_read_port(unsigned long p)
* dread 5uS sanity delay.
*/
-
static inline void z8530_write_port(unsigned long p, u8 d)
{
outb(d,Z8530_PORT_OF(p));
@@ -103,12 +101,9 @@ static inline void z8530_write_port(unsigned long p, u8 d)
udelay(5);
}
-
-
static void z8530_rx_done(struct z8530_channel *c);
static void z8530_tx_done(struct z8530_channel *c);
-
/**
* read_zsreg - Read a register from a Z85230
* @c: Z8530 channel to read from (2 per chip)
@@ -159,7 +154,6 @@ static inline void write_zsreg(struct z8530_channel *c, u8 reg, u8 val)
if(reg)
z8530_write_port(c->ctrlio, reg);
z8530_write_port(c->ctrlio, val);
-
}
/**
@@ -182,8 +176,6 @@ static inline void write_zsctrl(struct z8530_channel *c, u8 val)
*
* Write directly to the data register on the Z8530
*/
-
-
static inline void write_zsdata(struct z8530_channel *c, u8 val)
{
z8530_write_port(c->dataio, val);
@@ -204,7 +196,6 @@ EXPORT_SYMBOL(z8530_dead_port);
* Register loading parameters for currently supported circuit types
*/
-
/*
* Data clocked by telco end. This is the correct data for the UK
* "kilostream" service, and most other similar services.
@@ -352,7 +343,6 @@ static void z8530_rx(struct z8530_channel *c)
if(stat&END_FR)
{
-
/*
* Error ?
*/
@@ -392,7 +382,6 @@ static void z8530_rx(struct z8530_channel *c)
write_zsctrl(c, RES_H_IUS);
}
-
/**
* z8530_tx - Handle a PIO transmit event
* @c: Z8530 channel to process
@@ -423,7 +412,6 @@ static void z8530_tx(struct z8530_channel *c)
}
}
-
/*
* End of frame TX - fire another one
*/
@@ -474,7 +462,6 @@ static void z8530_status(struct z8530_channel *chan)
if (chan->netdevice)
netif_carrier_off(chan->netdevice);
}
-
}
write_zsctrl(chan, RES_EXT_INT);
write_zsctrl(chan, RES_H_IUS);
@@ -564,7 +551,6 @@ static void z8530_dma_status(struct z8530_channel *chan)
chan->status=status;
-
if(chan->dma_tx)
{
if(status&TxEOM)
@@ -621,7 +607,6 @@ static struct z8530_irqhandler z8530_txdma_sync = {
* (eg the MacII) we must clear the interrupt cause or die.
*/
-
static void z8530_rx_clear(struct z8530_channel *c)
{
/*
@@ -680,7 +665,6 @@ struct z8530_irqhandler z8530_nop = {
.status = z8530_status_clear,
};
-
EXPORT_SYMBOL(z8530_nop);
/**
@@ -718,7 +702,6 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id)
while(++work<5000)
{
-
intr = read_zsreg(&dev->chanA, R3);
if(!(intr & (CHARxIP|CHATxIP|CHAEXT|CHBRxIP|CHBTxIP|CHBEXT)))
break;
@@ -772,7 +755,6 @@ static const u8 reg_init[16]=
0x55,0,0,0
};
-
/**
* z8530_sync_open - Open a Z8530 channel for PIO
* @dev: The network interface we are using
@@ -808,7 +790,6 @@ int z8530_sync_open(struct net_device *dev, struct z8530_channel *c)
return 0;
}
-
EXPORT_SYMBOL(z8530_sync_open);
/**
@@ -1070,7 +1051,6 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
c->tx_dma_buf[1] = c->tx_dma_buf[0] + PAGE_SIZE/2;
-
spin_lock_irqsave(c->lock, cflags);
/*
@@ -1150,7 +1130,6 @@ int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c)
unsigned long dflags, cflags;
u8 chk;
-
spin_lock_irqsave(c->lock, cflags);
c->irqs = &z8530_nop;
@@ -1195,10 +1174,8 @@ int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c)
return 0;
}
-
EXPORT_SYMBOL(z8530_sync_txdma_close);
-
/*
* Name strings for Z8530 chips. SGI claim to have a 130, Zilog deny
* it exists...
@@ -1333,7 +1310,6 @@ int z8530_init(struct z8530_dev *dev)
return ret;
}
-
EXPORT_SYMBOL(z8530_init);
/**
@@ -1408,7 +1384,6 @@ int z8530_channel_load(struct z8530_channel *c, u8 *rtable)
EXPORT_SYMBOL(z8530_channel_load);
-
/**
* z8530_tx_begin - Begin packet transmission
* @c: The Z8530 channel to kick
@@ -1455,8 +1430,7 @@ static void z8530_tx_begin(struct z8530_channel *c)
else
{
c->txcount=c->tx_skb->len;
-
-
+
if(c->dma_tx)
{
/*
@@ -1490,7 +1464,6 @@ static void z8530_tx_begin(struct z8530_channel *c)
}
else
{
-
/* ABUNDER off */
write_zsreg(c, R10, c->regs[10]);
write_zsctrl(c, RES_Tx_CRC);
@@ -1500,7 +1473,6 @@ static void z8530_tx_begin(struct z8530_channel *c)
write_zsreg(c, R8, *c->tx_ptr++);
c->txcount--;
}
-
}
}
/*
@@ -1573,14 +1545,12 @@ static void z8530_rx_done(struct z8530_channel *c)
/*
* Is our receive engine in DMA mode
*/
-
if(c->rxdma_on)
{
/*
* Save the ready state and the buffer currently
* being used as the DMA target
*/
-
int ready=c->dma_ready;
unsigned char *rxb=c->rx_buf[c->dma_num];
unsigned long flags;
@@ -1588,7 +1558,6 @@ static void z8530_rx_done(struct z8530_channel *c)
/*
* Complete this DMA. Necessary to find the length
*/
-
flags=claim_dma_lock();
disable_dma(c->rxdma);
@@ -1731,7 +1700,6 @@ netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
if(c->tx_next_skb)
return NETDEV_TX_BUSY;
-
/* PC SPECIFIC - DMA limits */
/*
--
2.8.1
Powered by blists - more mailing lists