[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1623837686-22569-8-git-send-email-liweihang@huawei.com>
Date: Wed, 16 Jun 2021 18:01:25 +0800
From: Weihang Li <liweihang@...wei.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <andrew@...n.ch>,
<hkallweit1@...il.com>
CC: <netdev@...r.kernel.org>, <linuxarm@...wei.com>,
Wenpeng Liang <liangwenpeng@...wei.com>,
Weihang Li <liweihang@...wei.com>
Subject: [PATCH v2 net-next 7/8] net: phy: remove unnecessary line continuation
From: Wenpeng Liang <liangwenpeng@...wei.com>
Avoid unnecessary line continuations, and put '|' at the end of line.
Signed-off-by: Wenpeng Liang <liangwenpeng@...wei.com>
Signed-off-by: Weihang Li <liweihang@...wei.com>
---
drivers/net/phy/dp83640.c | 4 ++--
drivers/net/phy/et1011c.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 10769bf..705c166 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -170,9 +170,9 @@ static ushort gpio_tab[GPIO_TABLE_SIZE] = {
module_param(chosen_phy, int, 0444);
module_param_array(gpio_tab, ushort, NULL, 0444);
-MODULE_PARM_DESC(chosen_phy, \
+MODULE_PARM_DESC(chosen_phy,
"The address of the PHY to use for the ancillary clock features");
-MODULE_PARM_DESC(gpio_tab, \
+MODULE_PARM_DESC(gpio_tab,
"Which GPIO line to use for which purpose: cal,perout,extts1,...,extts6");
static void dp83640_gpio_defaults(struct ptp_pin_desc *pd)
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index 07bb484..be1b71d 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -73,10 +73,10 @@ static int et1011c_read_status(struct phy_device *phydev)
ET1011C_GIGABIT_SPEED) {
val = phy_read(phydev, ET1011C_CONFIG_REG);
val &= ~ET1011C_TX_FIFO_MASK;
- phy_write(phydev, ET1011C_CONFIG_REG, val\
- | ET1011C_GMII_INTERFACE\
- | ET1011C_SYS_CLK_EN\
- | ET1011C_TX_FIFO_DEPTH_16);
+ phy_write(phydev, ET1011C_CONFIG_REG, val |
+ ET1011C_GMII_INTERFACE |
+ ET1011C_SYS_CLK_EN |
+ ET1011C_TX_FIFO_DEPTH_16);
}
}
--
2.8.1
Powered by blists - more mailing lists