[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210618085322.147462-2-mailhol.vincent@wanadoo.fr>
Date: Fri, 18 Jun 2021 17:53:19 +0900
From: Vincent Mailhol <mailhol.vincent@...adoo.fr>
To: Marc Kleine-Budde <mkl@...gutronix.de>,
Stephen Hemminger <stephen@...workplumber.org>,
linux-can@...r.kernel.org
Cc: Oliver Hartkopp <socketcan@...tkopp.net>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
Vincent Mailhol <mailhol.vincent@...adoo.fr>
Subject: [PATCH v3 1/4] iplink_can: fix configuration ranges in print_usage()
The configuration ranges in print_usage() are taken from "Table 8 -
Time segments' minimum configuration ranges" in section 11.3.1.2
"Configuration of the bit time parameters" of ISO 11898-1.
The standard clearly specifies that "implementations may allow time
segments that exceed the minimum required configuration ranges
specified in Table 8".
Because no maximum ranges are given, all given ranges { a..b } are
simply replaced with { NUMBER }.
The actual ranges are specific to earch device and should be confirmed
doing:
$ ip --details link show can0
1: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10
link/can promiscuity 0 minmtu 0 maxmtu 0
can state STOPPED restart-ms 0
ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Signed-off-by: Vincent Mailhol <mailhol.vincent@...adoo.fr>
---
ip/iplink_can.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/ip/iplink_can.c b/ip/iplink_can.c
index 6a26f3ff..2736f3ab 100644
--- a/ip/iplink_can.c
+++ b/ip/iplink_can.c
@@ -44,13 +44,13 @@ static void print_usage(FILE *f)
"\n"
"\t[ termination { 0..65535 } ]\n"
"\n"
- "\tWhere: BITRATE := { 1..1000000 }\n"
+ "\tWhere: BITRATE := { NUMBER }\n"
"\t SAMPLE-POINT := { 0.000..0.999 }\n"
"\t TQ := { NUMBER }\n"
- "\t PROP-SEG := { 1..8 }\n"
- "\t PHASE-SEG1 := { 1..8 }\n"
- "\t PHASE-SEG2 := { 1..8 }\n"
- "\t SJW := { 1..4 }\n"
+ "\t PROP-SEG := { NUMBER }\n"
+ "\t PHASE-SEG1 := { NUMBER }\n"
+ "\t PHASE-SEG2 := { NUMBER }\n"
+ "\t SJW := { NUMBER }\n"
"\t RESTART-MS := { 0 | NUMBER }\n"
);
}
--
2.31.1
Powered by blists - more mailing lists